Dashticz Dial - Features, Fixes & Updates

[Bochelork]

Wow, that looks great, I will give it a try this weekend! Thanks!`

Do other types work as well? Watt, KWh? I've still empty slots....

Dashticz Watt:

Code: Select all

blocks['379_1'] = {
  width: 4,
  type: 'dial',
}

Dashticz KWh:

Code: Select all

blocks['379_2'] = {
  width: 4,
  type: 'dial',
}

Domoticz:

Code: Select all

Idx 	Hardware ID		Unit	Name	Type	SubType	Data 
379	Panelen	00082379	1	GroWatt	General	kWh	2.700 kW

[Lokonli]

Wow, that looks great, I will give it a try this weekend! Thanks!`

Do other types work as well? Watt, KWh? I've still empty slots....

Dashticz Watt:

Code: Select all

blocks['379_1'] = {
  width: 4,
  type: 'dial',
}

Dashticz KWh:

Code: Select all

blocks['379_2'] = {
  width: 4,
  type: 'dial',
}

Domoticz:

Code: Select all

Idx 	Hardware ID		Unit	Name	Type	SubType	Data 
379	Panelen	00082379	1	GroWatt	General	kWh	2.700 kW

Code: Select all

blocks[6] = {
    type:'dial',
    values: ['CounterToday'],
    showunit: true

}
blocks[46] = {
    type:'dial',
    values: ['CounterToday'],
    showunit: false
}

blocks[636] = {
    type:'dial',
    showunit: true
}
blocks[1027] = {
    type:'dial',
    showunit: true
}
blocks[1028] = {
    type:'dial',
    showunit: true
}

columns[2] = {}
columns[2] = {
    blocks: [
        6, 46, 636, 1027, 1028
    ],
    width: 6
}

evenmoredials.jpg (44.34 KiB) Viewed 1510 times

[Lokonli]

Set the min/max parameter to position the dial correctly (and get better formatting ...)
Example: L1 return from my P1 meter:

Code: Select all

blocks[759] = {
    type:'dial',
    min: 0,
    max: 3000,
    showunit: true
}

deliveryl1.jpg (8.23 KiB) Viewed 1508 times

[madpatrick]

How you get the new dials smaller
I've the other one at 50%, but the new add dials are 100%

I've this is my custom.css

Code: Select all

.dial-center 				{height: 50%!important;width: 50%!important;}

The inner ring is smaller, but the outer ring remain large

----------------------------
Found it !
in CONFIG.js

blocks[262] = {width: 2,type:'dial',.....}
----------------------------

[zenit]

Hi Lokonli,

Thanks for your great development and support on this! . The new dials are working perfect over here.

ok.
beta 3.6.3

Give it a try

See:
https://dashticz.readthedocs.io/en/beta ... neric-dial

more-dials.jpg

[Bochelork]

The generic dial works great. Thanks.

I've a request about the dimmer dials. Now you have to control them by dragging the dial, would it be possible to add the option to just click on the position to set the dimmer? (e.g. click on top of outer ring to set 50%)

[Mrblomme]

Hi all

I'm new here and got my dashticz running for a few days now. At this moment I've implemented Dial for my Tado thermostats.
The problem I'm having is that I cant switch the temperature (setpoin/desiredt) at the temp/hum dial and I cant see the temperature at the setpoint dial...

Is it possible to combine the 2? So I can adjust the temperature and also see the current temp in 1 dial?

tado.JPG (39.37 KiB) Viewed 1442 times

[Lokonli]

Hi all

I'm new here and got my dashticz running for a few days now. At this moment I've implemented Dial for my Tado thermostats.
The problem I'm having is that I cant switch the temperature (setpoin/desiredt) at the temp/hum dial and I cant see the temperature at the setpoint dial...

Is it possible to combine the 2? So I can adjust the temperature and also see the current temp in 1 dial?

tado.JPG

For some devices this will work already. As an example, define your block as follows:

Code: Select all

blocks['thermostat'] = {
    title:'Living Room',
    idx: 25,
    temp: 27,
    type:'dial',
}

In this case '25' is the Domoticz device id of the thermostat device. '27' is the temperature device.

thermostat.jpg (8.37 KiB) Viewed 1431 times

Currently the temperature in my living room is 20,9 degrees (device 27), while the central heating setpoint is 17,7 degrees (device 25). By turning the needle, the setpoint will be adjusted.

[HansieNL]

Is it also possible to have one dial with setpoint, temperature and humidity?

[Lokonli]

Is it also possible to have one dial with setpoint, temperature and humidity?

Not yet,,,

What would be a clean way to define such a dial?

What do you think of the following:

Code: Select all

block['myblock'] = {
  type: dial,
  values: [
     {
        idx: 12,
        value: 'Temp'
     },
     {
       idx: 13,
       value: 'Setpoint',
       isSetpoint: true
     },
     {
      idx: 14,
      value: 'Humidity'
      }
     ]
 }
 

In this example we combine the data from three devices (12, 13, 14). but you can use the same idx as well.
The first value will be used as the central big number in the dial block (device 12, temperature). The needle will be used to set the device labeled with isSetpoint: true

Would this be useful?

(To be clear: Currently this is not implemented yet)

[HansieNL]

Is it also possible to have one dial with setpoint, temperature and humidity?

Not yet,,,

What would be a clean way to define such a dial?

What do you think of the following:

Code: Select all

block['myblock'] = {
  type: dial,
  values: [
     {
        idx: 12,
        value: 'Temp'
     },
     {
       idx: 13,
       value: 'Setpoint',
       isSetpoint: true
     },
     {
      idx: 14,
      value: 'Humidity'
      }
     ]
 }
 

In this example we combine the data from three devices (12, 13, 14). but you can use the same idx as well.
The first value will be used as the central big number in the dial block (device 12, temperature). The needle will be used to set the device labeled with isSetpoint: true

Would this be useful?

(To be clear: Currently this is not implemented yet)

That will be a good way I think. Take your time to implement this option.

[madpatrick]

Hi,

Is it possible to get a color change or some kind of alert when a value is too high
Like you can do with a normal block in custom.js

Code: Select all

function getStatus_262(block){
var idx = block.idx;
var device = block.device;
   if(parseFloat(device['Data'])>2){
      block.addClass='warning';
   }
if(parseFloat(device['Data'])<1.4){
      block.addClass='warning';
   }
   else {
      block.addClass='';
   }
}

[meatpuppet]

Hi,

I installed Dashticz successfully, however for some reason I can't set the min/max values on my thermostat-setpoint. Is it possible on this specific device or did I miss something ? Here is the code:

Code: Select all

blocks['tsalon_manu'] = {
        idx: 24,
        title: 'Salon_MANU',
        type: 'dial',
        width: 6,
        min: 15,
        max: 25,
        setpoint: 20,  // this value will be used to control the color of the outer ring, e.g. < 15 is blue, >= 15 is orange
        shownumbers: true,  // display the numbers on the dial (default is false)
        showring: true, // display outer ring color all the time (default is false, will only display when hover over)
        showunit: true // display unit for the dial value (default is false)
}

The min and max remain default values...

Thanks a lot for your support!

[Lokonli]

Is it also possible to have one dial with setpoint, temperature and humidity?

Not yet,,,

What would be a clean way to define such a dial?

What do you think of the following:

Code: Select all

block['myblock'] = {
  type: dial,
  values: [
     {
        idx: 12,
        value: 'Temp'
     },
     {
       idx: 13,
       value: 'Setpoint',
       isSetpoint: true
     },
     {
      idx: 14,
      value: 'Humidity'
      }
     ]
 }
 

In this example we combine the data from three devices (12, 13, 14). but you can use the same idx as well.
The first value will be used as the central big number in the dial block (device 12, temperature). The needle will be used to set the device labeled with isSetpoint: true

Would this be useful?

(To be clear: Currently this is not implemented yet)

That will be a good way I think. Take your time to implement this option.

Try latest beta

[Lokonli]

Hi,

I installed Dashticz successfully, however for some reason I can't set the min/max values on my thermostat-setpoint. Is it possible on this specific device or did I miss something ? Here is the code:

Code: Select all

blocks['tsalon_manu'] = {
        idx: 24,
        title: 'Salon_MANU',
        type: 'dial',
        width: 6,
        min: 15,
        max: 25,
        setpoint: 20,  // this value will be used to control the color of the outer ring, e.g. < 15 is blue, >= 15 is orange
        shownumbers: true,  // display the numbers on the dial (default is false)
        showring: true, // display outer ring color all the time (default is false, will only display when hover over)
        showunit: true // display unit for the dial value (default is false)
}

The min and max remain default values...

Thanks a lot for your support!

Try latest beta.

[madpatrick]

Hi Lokonli,

I lost 2 dials after the latest beta.

Code: Select all

blocks['gr_tuin'] 		= {idx: 's1',type: 'dial', color: '#ffff00', width: 3, last_update: false, title: ' '}
blocks['gr_kamer'] 		= {idx: 's2',type: 'dial', color: '#ffff00', width: 3, last_update: false, title: ' '}
blocks['ventilatie'] 		= {idx: 112, type: 'dial', color: '#ffffff', width: 3, last_update: false, title: ' '}
blocks['dimmer_hal']	 	= {idx: 154, type: 'dial', color: '#ffff00', width: 3, last_update: false, title: ' ', shownumbers: true, showring: true, showunit: true}

The group dials idx:'s1' and idx:'s2' are not visible anymore after your last update

[meatpuppet]

Hi,

I installed Dashticz successfully, however for some reason I can't set the min/max values on my thermostat-setpoint. Is it possible on this specific device or did I miss something ? Here is the code:

Code: Select all

blocks['tsalon_manu'] = {
        idx: 24,
        title: 'Salon_MANU',
        type: 'dial',
        width: 6,
        min: 15,
        max: 25,
        setpoint: 20,  // this value will be used to control the color of the outer ring, e.g. < 15 is blue, >= 15 is orange
        shownumbers: true,  // display the numbers on the dial (default is false)
        showring: true, // display outer ring color all the time (default is false, will only display when hover over)
        showunit: true // display unit for the dial value (default is false)
}

The min and max remain default values...

Thanks a lot for your support!

Try latest beta.

Thanks, that works. However now when I click on the dial to change the setpoint value it does not update anymore in Dashticz (it does in domoticz). I need to refresh the page to see the updated value on the dial... Did I miss something?

Thanks!

[Lokonli]

Hi Lokonli,

I lost 2 dials after the latest beta.

Code: Select all

blocks['gr_tuin'] 		= {idx: 's1',type: 'dial', color: '#ffff00', width: 3, last_update: false, title: ' '}
blocks['gr_kamer'] 		= {idx: 's2',type: 'dial', color: '#ffff00', width: 3, last_update: false, title: ' '}
blocks['ventilatie'] 		= {idx: 112, type: 'dial', color: '#ffffff', width: 3, last_update: false, title: ' '}
blocks['dimmer_hal']	 	= {idx: 154, type: 'dial', color: '#ffff00', width: 3, last_update: false, title: ' ', shownumbers: true, showring: true, showunit: true}

The group dials idx:'s1' and idx:'s2' are not visible anymore after your last update

s1 and s2 are scenes/groups, and indeed that will not work at the moment.
I even was not aware it was working for scenes/groups.

I'll fix it in the next beta.

[Lokonli]

Hi,

I installed Dashticz successfully, however for some reason I can't set the min/max values on my thermostat-setpoint. Is it possible on this specific device or did I miss something ? Here is the code:

Code: Select all

blocks['tsalon_manu'] = {
        idx: 24,
        title: 'Salon_MANU',
        type: 'dial',
        width: 6,
        min: 15,
        max: 25,
        setpoint: 20,  // this value will be used to control the color of the outer ring, e.g. < 15 is blue, >= 15 is orange
        shownumbers: true,  // display the numbers on the dial (default is false)
        showring: true, // display outer ring color all the time (default is false, will only display when hover over)
        showunit: true // display unit for the dial value (default is false)
}

The min and max remain default values...

Thanks a lot for your support!

Try latest beta.

Thanks, that works. However now when I click on the dial to change the setpoint value it does not update anymore in Dashticz (it does in domoticz). I need to refresh the page to see the updated value on the dial... Did I miss something?

Thanks!

I had to change the update mechanism to support multi-device. I'll check.

[Mrblomme]

Hi all

I'm new here and got my dashticz running for a few days now. At this moment I've implemented Dial for my Tado thermostats.
The problem I'm having is that I cant switch the temperature (setpoin/desiredt) at the temp/hum dial and I cant see the temperature at the setpoint dial...

Is it possible to combine the 2? So I can adjust the temperature and also see the current temp in 1 dial?

tado.JPG

For some devices this will work already. As an example, define your block as follows:

Code: Select all

blocks['thermostat'] = {
    title:'Living Room',
    idx: 25,
    temp: 27,
    type:'dial',
}

In this case '25' is the Domoticz device id of the thermostat device. '27' is the temperature device.

thermostat.jpg

Currently the temperature in my living room is 20,9 degrees (device 27), while the central heating setpoint is 17,7 degrees (device 25). By turning the needle, the setpoint will be adjusted.

Done! Thanks!