Domoticz App

Moderator: leecollings

063405
Posts: 20
Joined: Thursday 06 August 2020 14:20
Target OS: Raspberry Pi / ODroid
Domoticz version: 2020.2
Location: Prague
Contact:

Re: Domoticz App

Post by 063405 »

Hello,
Can anyone assist me on how to fill the server details in the iOS app? Please!

I am far from IT person, but I managed to set up a RPi with Zigbee sniffer. The platform works fine from the RPi browser, but I cannot access it from any other computer or the iOS app.

Please!
Alex
rtfmjoey
Posts: 8
Joined: Friday 09 February 2018 15:24
Target OS: -
Domoticz version:
Contact:

Re: Domoticz App

Post by rtfmjoey »

-removed- (this is ios, not android)
Last edited by rtfmjoey on Wednesday 04 November 2020 6:59, edited 1 time in total.
Kruu
Posts: 49
Joined: Tuesday 17 January 2017 20:27
Target OS: Raspberry Pi / ODroid
Domoticz version: 2020.2
Contact:

Re: Domoticz App

Post by Kruu »

rtfmjoey wrote: Wednesday 04 November 2020 6:55 It seems there is a bug in version 0.2.253; I was greeted with the notification wizard after the update and needed to fill in my server details again. After filling them in, discovery found all devices etc but wheb saving I get an message 'incorrect settings detected' and the wizard starts over.

I've uninstalled the app/removed all cached data and reinstalled but the issue persists. It seems that more users are experiencing the same issue.
Same problem here. I've reinstalled the app but no help.
TroisSix
Posts: 91
Joined: Monday 11 January 2016 9:29
Target OS: -
Domoticz version: 2022.2
Location: France
Contact:

Re: Domoticz App

Post by TroisSix »

Hello,
Can someone explain how I can get some devices on the first page « dashboard »?
Thx
VM Debian - Domoticz stable v2023.1, RFXtrx433, Aeotec Z-Stick Gen5, APC ES700
- rts: dio, oregon, somfy
- zwave: fibaro fgs212, aeotec smart switch, vision ZG8101
- IO Homecontrol: Velux Connexoon
- logitech harmony hub, philips hue, gps Pilot
User avatar
FearNaBoinne
Posts: 144
Joined: Tuesday 30 April 2019 10:08
Target OS: Linux
Domoticz version: 2021.1
Location: Sector 0
Contact:

Re: Domoticz App

Post by FearNaBoinne »

TroisSix wrote: Wednesday 23 December 2020 17:10 Hello,
Can someone explain how I can get some devices on the first page « dashboard »?
Thx
Mark them as favorites IIRC...
RasPi, Raspbian , Domoticz v2021.1, Z-Wave Stick, RFLink, RFXtrx433e, Hue, Tuya (Tasmota/Mosquitto with Discovery), ESP(easy), MySensors.org, OTGW
TroisSix
Posts: 91
Joined: Monday 11 January 2016 9:29
Target OS: -
Domoticz version: 2022.2
Location: France
Contact:

Re: Domoticz App

Post by TroisSix »

@ FearNaBoinne
Excellent, it was so simple I wasn’t expecting to do this by this way, Thx 😜
But I am facing a bug: when I click to put on favorites it says it is removed, but it never says that it is added again...
VM Debian - Domoticz stable v2023.1, RFXtrx433, Aeotec Z-Stick Gen5, APC ES700
- rts: dio, oregon, somfy
- zwave: fibaro fgs212, aeotec smart switch, vision ZG8101
- IO Homecontrol: Velux Connexoon
- logitech harmony hub, philips hue, gps Pilot
erikvers
Posts: 2
Joined: Friday 10 July 2020 23:49
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: Domoticz App

Post by erikvers »

can someone explain to me how to get notifications working in the app?

Tested and worked with "pushover"

I chose the paid app for the notifications. would be bad if this doesn't work ...
Michalux
Posts: 27
Joined: Sunday 22 March 2020 17:46
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: Domoticz App

Post by Michalux »

It looks like there is a problem with correct user profile behavior or even permissions. I've created a separate user profile for my daughter and put a few switches on her panel. In a browser and in Android app it works just fine - after logging in to her account I can see exactly the switches I should. But in IOS version it shows the panel configuration like for the admin account.
Can anyone confirm that bug ?
moffe
Posts: 10
Joined: Friday 23 August 2013 8:32
Target OS: Raspberry Pi / ODroid
Domoticz version: V3.8834
Location: Sweden
Contact:

Re: Domoticz App

Post by moffe »

Any updates for this? Like the multiserver feature that is on android?
filbert
Posts: 10
Joined: Wednesday 12 May 2021 20:45
Target OS: Windows
Domoticz version:
Contact:

Re: Domoticz App

Post by filbert »

063405 wrote: Thursday 06 August 2020 14:28 Hello,
Can anyone assist me on how to fill the server details in the iOS app? Please!
From my experience, put the IP address and port in the relevant fields. leave Username and Password blank. Then verify the settings. That worked for me, once I's got the Windows firewall out of the way on the Domoticz box. (I had also added the local network in the 'Settings/Local Networks' area)
BurningTyre
Posts: 28
Joined: Wednesday 21 August 2019 15:44
Target OS: Raspberry Pi / ODroid
Domoticz version: 2023.2
Location: Arnhem, The Netherlands
Contact:

Re: Domoticz App

Post by BurningTyre »

I cannot get Domoticz app connection settings working when not on my home WiFi. (external acces)

Though i can connect with any web browser to my domoticz server (my own ip address with ports 8080 or 80 or 443).


What are the right settings to have the app working from external acces?
User avatar
FearNaBoinne
Posts: 144
Joined: Tuesday 30 April 2019 10:08
Target OS: Linux
Domoticz version: 2021.1
Location: Sector 0
Contact:

Re: Domoticz App

Post by FearNaBoinne »

BurningTyre wrote: Tuesday 01 June 2021 16:30 I cannot get Domoticz app connection settings working when not on my home WiFi. (external acces)

Though i can connect with any web browser to my domoticz server (my own ip address with ports 8080 or 80 or 443).


What are the right settings to have the app working from external acces?
I've set it up such that internally my DNS resolves to the local IP, and externally to the WAN IP, and forwarded the port Domoticz uses to the internal IP. I also ensured I have a legitimate cert (self signed certs do not work with the app!!!) on my Domoticz server. That way it works wherever I am, as the DNS name matches the cert, and is identical whether inside or outside my LAN.

I would strongly recommend against having the non-encrypted (80/8080) access open from the Internet, as it is way to easy to intercept and collect authentication information that way!
(Sorry, I work in Internet Security, am a CISSP, CISM, C|EH, CTGA and more, so I am a 'bit' anal about security practices. I'll leave it at this one remark though, it is your home network, not mine!)
RasPi, Raspbian , Domoticz v2021.1, Z-Wave Stick, RFLink, RFXtrx433e, Hue, Tuya (Tasmota/Mosquitto with Discovery), ESP(easy), MySensors.org, OTGW
User avatar
McMelloW
Posts: 427
Joined: Monday 20 November 2017 17:01
Target OS: Raspberry Pi / ODroid
Domoticz version: V2024.1
Location: Harderwijk, NL
Contact:

Re: Domoticz App

Post by McMelloW »

FearNaBoinne wrote: Thursday 10 June 2021 11:19
I've set it up such that internally my DNS resolves to the local IP, and externally to the WAN IP, and forwarded the port Domoticz uses to the internal IP. I also ensured I have a legitimate cert (self signed certs do not work with the app!!!) on my Domoticz server. That way it works wherever I am, as the DNS name matches the cert, and is identical whether inside or outside my LAN.

I would strongly recommend against having the non-encrypted (80/8080) access open from the Internet, as it is way to easy to intercept and collect authentication information that way!
(Sorry, I work in Internet Security, am a CISSP, CISM, C|EH, CTGA and more, so I am a 'bit' anal about security practices. I'll leave it at this one remark though, it is your home network, not mine!)


Hi FearNaBoinne

I use the Domoticz App on Android 11. Locally this works at home very good. But when I try to use the app with WireGuard VPN I got the message Oops something went wrong, please check your connection.
Connecting with VPN Wireguard and the chrome browser to Domoticz works like a charm. How can I get the App connecting via VPN WireGuard.
Greetings McMelloW
User avatar
elzorrovega
Posts: 61
Joined: Friday 08 May 2020 19:26
Target OS: Raspberry Pi / ODroid
Domoticz version: 2024.7
Location: Bordeaux, France
Contact:

Re: Domoticz App

Post by elzorrovega »

Hello All Domoticz Client Users,

I posted the following in this sub-forum viewtopic.php?f=36&t=36706
concerning the fact that notifications are not working for me anymore. There is another user with similar issues but it's hard to believe that there are only two people that share the same issue. Here is the link to his original post viewtopic.php?f=6&t=36653

Domoticz Server application or Rasbian related packages could be the source of our misery. My RPi has all the latest vewrsion. However, could there be something related to the latest update to Mark Heinis application. I make a habit to update all my iPhone applications when they are available. According to my Settings\iPhone Storage\Domotizc is version 0.1.55. Apple store shows Version 1.75.

The common error we get is

Code: Select all

2021-08-01 16:30:22.602 Notification sent (fcm) => Failed
I am not not a developer and just because I read a few pages about Firebase Cloud messaging will certainly not make me an expert; however, I wonder if the this error message is given because the client does not respond as expected.

Does someone have any ideas?

Regards,

El Zorro Vega
The solution to the problem changes the problem!

Rasberry Pi 4 Model B; Bullseye -64 bit OS 6.1.21-v8+ #1642
Domoticz Version: 2024.7
zwave-js-ui: 9.9.0.09b107a
zwave-js: 12.4.4 home id: 3714679688 home hex: 0xdd698388
BurningTyre
Posts: 28
Joined: Wednesday 21 August 2019 15:44
Target OS: Raspberry Pi / ODroid
Domoticz version: 2023.2
Location: Arnhem, The Netherlands
Contact:

Re: Domoticz App

Post by BurningTyre »

Since 2022.2 update all my blinds are not working through the app.

To open it sends an 'off' command, and to close it sends an 'on' command (inverted!).
To open it need to send 'on' or 'open'.

My wife is not going to like that it is not working anymore....
User avatar
FearNaBoinne
Posts: 144
Joined: Tuesday 30 April 2019 10:08
Target OS: Linux
Domoticz version: 2021.1
Location: Sector 0
Contact:

Re: Domoticz App

Post by FearNaBoinne »

Probably because the latest update changed the inverted blinds behaviors... If you had inverted blinds, you may have to go in to ensure they are correctly marked as normal blinds with the 'inverted' property set.
RasPi, Raspbian , Domoticz v2021.1, Z-Wave Stick, RFLink, RFXtrx433e, Hue, Tuya (Tasmota/Mosquitto with Discovery), ESP(easy), MySensors.org, OTGW
BurningTyre
Posts: 28
Joined: Wednesday 21 August 2019 15:44
Target OS: Raspberry Pi / ODroid
Domoticz version: 2023.2
Location: Arnhem, The Netherlands
Contact:

Re: Domoticz App

Post by BurningTyre »

as is said:

The app:
To open it sends an 'off' command, and to close it sends an 'on' command.


Domoticz site:
To open it sends 'open' or 'on' (script) to open.
TroisSix
Posts: 91
Joined: Monday 11 January 2016 9:29
Target OS: -
Domoticz version: 2022.2
Location: France
Contact:

Re: Domoticz App

Post by TroisSix »

@BurningTyre
A lot of us also encountered this issue, the only proper way is to empty the cache of your domoticz, browser, try open/close from the web page, etc.
Finally you should find new icons that you'll be able to toggle if need (ie. inverted, ...)
It will work ;)
VM Debian - Domoticz stable v2023.1, RFXtrx433, Aeotec Z-Stick Gen5, APC ES700
- rts: dio, oregon, somfy
- zwave: fibaro fgs212, aeotec smart switch, vision ZG8101
- IO Homecontrol: Velux Connexoon
- logitech harmony hub, philips hue, gps Pilot
DomoticzCH
Posts: 6
Joined: Saturday 22 May 2021 7:47
Target OS: Raspberry Pi / ODroid
Domoticz version:
Location: CH
Contact:

Re: Domoticz App

Post by DomoticzCH »

Hi all,

Is the iOS app still being maintained?

I have a serious problem: I use Cloudflare tunnel to access my remote Domoticz server hosted on a Raspberry Pi. This means that Cloudflare is acting as a proxy. When you DNS lookup the hostname, you get 2 IP adresses, and I suppose that this totally throws off the Domoticz iPad app… I cannot even start the app, it just purely crashes after having entered the server details.

Has anyone experienced this?

Thanks!
Anonymouse0104
Posts: 5
Joined: Sunday 19 March 2023 12:53
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: Domoticz App

Post by Anonymouse0104 »

Hi! For a couple of years I run the domoticz app in my iPhone. However, I try to install domoticz for a friend of mine ... in the app after filling in all the server settings it keeps saying "unautherized". Any idea how to solve this?
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests