domoticz in synology as package! Available now.

[alkempter]

Hi,
upgraded from 2020.1 to 2020.2 beta on DS414j (comcerto).
Upgrade was no problem.
Domoticz works like before (minor problems with a Devolo device).
Thanks for providing the update!
Best regards
Al

[jumbotroll]

@jumbotroll good to see your back (if you're back, in that case we have different definitions of 'long time' )

If you're indeed doing frequent updates again, I'll upgrade to a 2020 version on short term...

Another question: you also create packages for MyDomoAtHome, correct? Could you compile the 0.2.41 version for the DS414 (ArmadaXP) please?

I'm only visiting
Don't expect very frequent updates as before.
MyDomoAtHome 0.2.42 is uploaded. (NOT TESTED!)

[mcwieger]

Thanks! Works as expected. Did not fix a bug I hoped it would, but that's with the creator of MDAH.

[Gravityz]

upgraded from 2020.1.11839 to 2020.2.12178

upgraded without problems or errors
everything seems to work but i will have a close look at all the devices just in case i need to role back.

made a backup and saved the ozwcache file just to be save.

only thing i need to check after a couple of days is if i delete the ozwcache file it recreates everything without problems.

last issues i had is thatdevices were not recognised correctly or were missing in the groups.
this is why saving a ozwcache file can help you get back to the old working situation

[gert3d]

Noobs question: Is there some kind of manual / explanation how to install jumbotroll's package and USB driver for synology (DS213j in my case)?
Thanks

[eSbek]

NEW! Domoticz Beta version 2020.2 for synology uploaded for testing.

http://www.jadahl.com

@jumbotroll
I upgraded from 2020.1.11835-8 to 2020.2.12213-8 (cedarview version, DS412+) and domoticz hangs / stops after the start. I had to go back to 2020.1

[jumbotroll]

NEW! Domoticz Beta version 2020.2 for synology uploaded for testing.

http://www.jadahl.com

@jumbotroll
I upgraded from 2020.1.11835-8 to 2020.2.12213-8 (cedarview version, DS412+) and domoticz hangs / stops after the start. I had to go back to 2020.1

I have also seen that this happens occasionally in recent versions. I have not located the problem, but if you press RUN a couple of times in the package center on domoticz, it tends to start. It also usually starts immediately after a reboot of the NAS.
If you use Python plugin, it can be a plugin problem?
Remember to also install official Python3 package from synology first if you install domoticz with python or domoticz will not run.

[SteGe]

Unfortunally it doesn't work at my synology NAS with python enabled (standard package). Get errors in pluginmgr but when I remove all plugins from the folder, it still isn't working... This is my error log when it crashes:

Code: Select all

2020-07-16 16:20:44.156  Status: (Toon) Initialized version 1.0.14, author 'John van de Vrugt'
2020-07-16 16:20:44.257  Error: Domoticz(pid:32185, tid:32200('PluginMgr')) received fatal signal 11 (Segmentation fault)
2020-07-16 16:20:44.257  Error: siginfo address=0x7db9, address=0x7f069d350089
2020-07-16 16:20:44.280  Error: Failed to start gdb, will use backtrace() for printing stack frame

2020-07-16 16:20:44.285  Error: #0  /usr/local/domoticz/bin/domoticz() [0x6ce890]
2020-07-16 16:20:44.285  Error: #1  /usr/local/domoticz/bin/domoticz : signal_handler(int, siginfo_t*, void*) + 0x27d [0x6cf32d]
2020-07-16 16:20:44.285  Error: #2  /lib/libpthread.so.0 :  + 0x101c0 [0x7f069d3501c0]
2020-07-16 16:20:44.285  Error: #3  /lib/libpthread.so.0 : raise + 0x29 [0x7f069d350089]
2020-07-16 16:20:44.285  Error: #4  /lib/libpthread.so.0 :  + 0x101c0 [0x7f069d3501c0]
2020-07-16 16:20:44.285  Error: #5  /lib/libpython3.5m.so : PyType_Ready + 0xe8a [0x7f069b6a989a]
2020-07-16 16:20:44.285  Error: #6  /lib/libpython3.5m.so :  + 0xc84be [0x7f069b6ab4be]
2020-07-16 16:20:44.285  Error: #7  /lib/libpython3.5m.so :  + 0xc0df3 [0x7f069b6a3df3]
2020-07-16 16:20:44.285  Error: #8  /lib/libpython3.5m.so : PyObject_Call + 0x6a [0x7f069b64af9a]
2020-07-16 16:20:44.285  Error: #9  /lib/libpython3.5m.so : PyEval_CallObjectWithKeywords + 0x47 [0x7f069b6feb87]
2020-07-16 16:20:44.286  Error: #10 /lib/libpython3.5m.so :  + 0x1183b6 [0x7f069b6fb3b6]
2020-07-16 16:20:44.286  Error: #11 /lib/libpython3.5m.so : PyCFunction_Call + 0xe9 [0x7f069b690a79]
2020-07-16 16:20:44.286  Error: #12 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x7435 [0x7f069b7062e5]
2020-07-16 16:20:44.286  Error: #13 /lib/libpython3.5m.so :  + 0x124d0b [0x7f069b707d0b]
2020-07-16 16:20:44.286  Error: #14 /lib/libpython3.5m.so : PyEval_EvalCodeEx + 0x23 [0x7f069b707de3]
2020-07-16 16:20:44.286  Error: #15 /lib/libpython3.5m.so : PyEval_EvalCode + 0x1b [0x7f069b707e0b]
2020-07-16 16:20:44.286  Error: #16 /lib/libpython3.5m.so :  + 0x11983d [0x7f069b6fc83d]
2020-07-16 16:20:44.286  Error: #17 /lib/libpython3.5m.so : PyCFunction_Call + 0xc9 [0x7f069b690a59]
2020-07-16 16:20:44.286  Error: #18 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x6dca [0x7f069b705c7a]
2020-07-16 16:20:44.286  Error: #19 /lib/libpython3.5m.so :  + 0x124d0b [0x7f069b707d0b]
2020-07-16 16:20:44.286  Error: #20 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x5e9c [0x7f069b704d4c]
2020-07-16 16:20:44.286  Error: #21 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x7899 [0x7f069b706749]
2020-07-16 16:20:44.286  Error: #22 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x7899 [0x7f069b706749]
2020-07-16 16:20:44.286  Error: #23 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x7899 [0x7f069b706749]
2020-07-16 16:20:44.286  Error: #24 /lib/libpython3.5m.so :  + 0x124d0b [0x7f069b707d0b]
2020-07-16 16:20:44.286  Error: #25 /lib/libpython3.5m.so : PyEval_EvalCodeEx + 0x23 [0x7f069b707de3]
2020-07-16 16:20:44.286  Error: #26 /lib/libpython3.5m.so :  + 0x91885 [0x7f069b674885]
2020-07-16 16:20:44.286  Error: #27 /lib/libpython3.5m.so : PyObject_Call + 0x6a [0x7f069b64af9a]
2020-07-16 16:20:44.286  Error: #28 /lib/libpython3.5m.so : _PyObject_CallMethodIdObjArgs + 0xbf [0x7f069b64b8df]
2020-07-16 16:20:44.286  Error: #29 /lib/libpython3.5m.so : PyImport_ImportModuleLevelObject + 0x814 [0x7f069b71bae4]
2020-07-16 16:20:44.286  Error: #30 /lib/libpython3.5m.so :  + 0x1181f8 [0x7f069b6fb1f8]
2020-07-16 16:20:44.286  Error: #31 /lib/libpython3.5m.so : PyCFunction_Call + 0xe9 [0x7f069b690a79]
2020-07-16 16:20:44.286  Error: #32 /lib/libpython3.5m.so : PyObject_Call + 0x6a [0x7f069b64af9a]
2020-07-16 16:20:44.286  Error: #33 /lib/libpython3.5m.so : PyEval_CallObjectWithKeywords + 0x47 [0x7f069b6feb87]
2020-07-16 16:20:44.286  Error: #34 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x3d24 [0x7f069b702bd4]
2020-07-16 16:20:44.286  Error: #35 /lib/libpython3.5m.so :  + 0x124d0b [0x7f069b707d0b]
2020-07-16 16:20:44.287  Error: #36 /lib/libpython3.5m.so : PyEval_EvalCodeEx + 0x23 [0x7f069b707de3]
2020-07-16 16:20:44.287  Error: #37 /lib/libpython3.5m.so : PyEval_EvalCode + 0x1b [0x7f069b707e0b]
2020-07-16 16:20:44.287  Error: #38 /lib/libpython3.5m.so :  + 0x11983d [0x7f069b6fc83d]
2020-07-16 16:20:44.287  Error: #39 /lib/libpython3.5m.so : PyCFunction_Call + 0xc9 [0x7f069b690a59]
2020-07-16 16:20:44.287  Error: #40 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x6dca [0x7f069b705c7a]
2020-07-16 16:20:44.287  Error: #41 /lib/libpython3.5m.so :  + 0x124d0b [0x7f069b707d0b]
2020-07-16 16:20:44.287  Error: #42 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x5e9c [0x7f069b704d4c]
2020-07-16 16:20:44.287  Error: #43 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x7899 [0x7f069b706749]
2020-07-16 16:20:44.287  Error: #44 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x7899 [0x7f069b706749]
2020-07-16 16:20:44.287  Error: #45 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x7899 [0x7f069b706749]
2020-07-16 16:20:44.287  Error: #46 /lib/libpython3.5m.so :  + 0x124d0b [0x7f069b707d0b]
2020-07-16 16:20:44.287  Error: #47 /lib/libpython3.5m.so : PyEval_EvalCodeEx + 0x23 [0x7f069b707de3]
2020-07-16 16:20:44.287  Error: #48 /lib/libpython3.5m.so :  + 0x91885 [0x7f069b674885]
2020-07-16 16:20:44.287  Error: #49 /lib/libpython3.5m.so : PyObject_Call + 0x6a [0x7f069b64af9a]
2020-07-16 16:20:44.287  Error: #50 /lib/libpython3.5m.so : _PyObject_CallMethodIdObjArgs + 0xbf [0x7f069b64b8df]
2020-07-16 16:20:44.287  Error: #51 /lib/libpython3.5m.so : PyImport_ImportModuleLevelObject + 0x814 [0x7f069b71bae4]
2020-07-16 16:20:44.287  Error: #52 /lib/libpython3.5m.so :  + 0x1181f8 [0x7f069b6fb1f8]
2020-07-16 16:20:44.287  Error: #53 /lib/libpython3.5m.so : PyCFunction_Call + 0xe9 [0x7f069b690a79]
2020-07-16 16:20:44.287  Error: #54 /lib/libpython3.5m.so : PyObject_Call + 0x6a [0x7f069b64af9a]
2020-07-16 16:20:44.287  Error: #55 /lib/libpython3.5m.so : PyEval_CallObjectWithKeywords + 0x47 [0x7f069b6feb87]
2020-07-16 16:20:44.287  Error: #56 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x3d24 [0x7f069b702bd4]
2020-07-16 16:20:44.287  Error: #57 /lib/libpython3.5m.so :  + 0x124d0b [0x7f069b707d0b]
2020-07-16 16:20:44.287  Error: #58 /lib/libpython3.5m.so : PyEval_EvalCodeEx + 0x23 [0x7f069b707de3]
2020-07-16 16:20:44.287  Error: #59 /lib/libpython3.5m.so : PyEval_EvalCode + 0x1b [0x7f069b707e0b]
2020-07-16 16:20:44.287  Error: #60 /lib/libpython3.5m.so :  + 0x11983d [0x7f069b6fc83d]
2020-07-16 16:20:44.287  Error: #61 /lib/libpython3.5m.so : PyCFunction_Call + 0xc9 [0x7f069b690a59]
2020-07-16 16:20:44.287  Error: #62 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x6dca [0x7f069b705c7a]
2020-07-16 16:20:44.287  Error: #63 /lib/libpython3.5m.so :  + 0x124d0b [0x7f069b707d0b]
2020-07-16 16:20:44.287  Error: #64 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x5e9c [0x7f069b704d4c]
2020-07-16 16:20:44.287  Error: #65 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x7899 [0x7f069b706749]
2020-07-16 16:20:44.287  Error: #66 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x7899 [0x7f069b706749]
2020-07-16 16:20:44.287  Error: #67 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x7899 [0x7f069b706749]
2020-07-16 16:20:44.288  Error: #68 /lib/libpython3.5m.so :  + 0x124d0b [0x7f069b707d0b]
2020-07-16 16:20:44.288  Error: #69 /lib/libpython3.5m.so : PyEval_EvalCodeEx + 0x23 [0x7f069b707de3]
2020-07-16 16:20:44.288  Error: #70 /lib/libpython3.5m.so :  + 0x91885 [0x7f069b674885]
2020-07-16 16:20:44.288  Error: #71 /lib/libpython3.5m.so : PyObject_Call + 0x6a [0x7f069b64af9a]
2020-07-16 16:20:44.288  Error: #72 /lib/libpython3.5m.so : _PyObject_CallMethodIdObjArgs + 0xbf [0x7f069b64b8df]
2020-07-16 16:20:44.288  Error: #73 /lib/libpython3.5m.so : PyImport_ImportModuleLevelObject + 0x814 [0x7f069b71bae4]
2020-07-16 16:20:44.288  Error: #74 /lib/libpython3.5m.so :  + 0x1181f8 [0x7f069b6fb1f8]
2020-07-16 16:20:44.288  Error: #75 /lib/libpython3.5m.so : PyCFunction_Call + 0xe9 [0x7f069b690a79]
2020-07-16 16:20:44.288  Error: #76 /lib/libpython3.5m.so : PyObject_Call + 0x6a [0x7f069b64af9a]
2020-07-16 16:20:44.288  Error: #77 /lib/libpython3.5m.so : PyEval_CallObjectWithKeywords + 0x47 [0x7f069b6feb87]
2020-07-16 16:20:44.288  Error: #78 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x3d24 [0x7f069b702bd4]
2020-07-16 16:20:44.288  Error: #79 /lib/libpython3.5m.so :  + 0x124d0b [0x7f069b707d0b]
2020-07-16 16:20:44.288  Error: #80 /lib/libpython3.5m.so : PyEval_EvalCodeEx + 0x23 [0x7f069b707de3]
2020-07-16 16:20:44.288  Error: #81 /lib/libpython3.5m.so : PyEval_EvalCode + 0x1b [0x7f069b707e0b]
2020-07-16 16:20:44.288  Error: #82 /lib/libpython3.5m.so :  + 0x1437a4 [0x7f069b7267a4]
2020-07-16 16:20:44.288  Error: #83 /lib/libpython3.5m.so : PyRun_StringFlags + 0x74 [0x7f069b728074]
2020-07-16 16:20:44.288  Error: #84 /lib/libpython3.5m.so :  + 0x1197a8 [0x7f069b6fc7a8]
2020-07-16 16:20:44.288  Error: #85 /lib/libpython3.5m.so : PyCFunction_Call + 0xc9 [0x7f069b690a59]
2020-07-16 16:20:44.288  Error: #86 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x7435 [0x7f069b7062e5]
2020-07-16 16:20:44.288  Error: #87 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x7899 [0x7f069b706749]
2020-07-16 16:20:44.288  Error: #88 /lib/libpython3.5m.so :  + 0x124d0b [0x7f069b707d0b]
2020-07-16 16:20:44.288  Error: #89 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x5e9c [0x7f069b704d4c]
2020-07-16 16:20:44.288  Error: #90 /lib/libpython3.5m.so :  + 0x124d0b [0x7f069b707d0b]
2020-07-16 16:20:44.288  Error: #91 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x5e9c [0x7f069b704d4c]
2020-07-16 16:20:44.288  Error: #92 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x7899 [0x7f069b706749]
2020-07-16 16:20:44.288  Error: #93 /lib/libpython3.5m.so :  + 0x124d0b [0x7f069b707d0b]
2020-07-16 16:20:44.288  Error: #94 /lib/libpython3.5m.so : PyEval_EvalCodeEx + 0x23 [0x7f069b707de3]
2020-07-16 16:20:44.288  Error: #95 /lib/libpython3.5m.so : PyEval_EvalCode + 0x1b [0x7f069b707e0b]
2020-07-16 16:20:44.288  Error: #96 /lib/libpython3.5m.so :  + 0x11983d [0x7f069b6fc83d]
2020-07-16 16:20:44.288  Error: #97 /lib/libpython3.5m.so : PyCFunction_Call + 0xc9 [0x7f069b690a59]
2020-07-16 16:20:44.288  Error: #98 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x6dca [0x7f069b705c7a]
2020-07-16 16:20:44.288  Error: #99 /lib/libpython3.5m.so :  + 0x124d0b [0x7f069b707d0b]
2020-07-16 16:20:44.288  Error: #100 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x5e9c [0x7f069b704d4c]
2020-07-16 16:20:44.288  Error: #101 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x7899 [0x7f069b706749]
2020-07-16 16:20:44.289  Error: #102 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x7899 [0x7f069b706749]
2020-07-16 16:20:44.289  Error: #103 /lib/libpython3.5m.so : PyEval_EvalFrameEx + 0x7899 [0x7f069b706749]
2020-07-16 16:20:44.289  Error: #104 /lib/libpython3.5m.so :  + 0x124d0b [0x7f069b707d0b]
2020-07-16 16:20:44.289  Error: #105 /lib/libpython3.5m.so : PyEval_EvalCodeEx + 0x23 [0x7f069b707de3]
2020-07-16 16:20:44.289  Error: #106 /lib/libpython3.5m.so :  + 0x91885 [0x7f069b674885]
2020-07-16 16:20:44.289  Error: #107 /lib/libpython3.5m.so : PyObject_Call + 0x6a [0x7f069b64af9a]
2020-07-16 16:20:44.289  Error: #108 /lib/libpython3.5m.so : _PyObject_CallMethodIdObjArgs + 0xbf [0x7f069b64b8df]
2020-07-16 16:20:44.289  Error: #109 /lib/libpython3.5m.so : PyImport_ImportModuleLevelObject + 0x814 [0x7f069b71bae4]
2020-07-16 16:20:44.289  Error: #110 /lib/libpython3.5m.so :  + 0x1181f8 [0x7f069b6fb1f8]
2020-07-16 16:20:44.289  Error: #111 /lib/libpython3.5m.so : PyCFunction_Call + 0xe9 [0x7f069b690a79]
2020-07-16 16:20:44.289  Error: #112 /lib/libpython3.5m.so : PyObject_Call + 0x6a [0x7f069b64af9a]
2020-07-16 16:20:44.289  Error: #113 /lib/libpython3.5m.so :  + 0x68065 [0x7f069b64b065]
2020-07-16 16:20:44.289  Error: #114 /lib/libpython3.5m.so : PyObject_CallFunction + 0x83 [0x7f069b64b203]
2020-07-16 16:20:44.289  Error: #115 /lib/libpython3.5m.so : PyImport_Import + 0x106 [0x7f069b71bf96]
2020-07-16 16:20:44.289  Error: #116 /lib/libpython3.5m.so : PyImport_ImportModule + 0x1a [0x7f069b71c18a]
2020-07-16 16:20:44.289  Error: #117 /lib/libpython3.5m.so :  + 0x1411f0 [0x7f069b7241f0]
2020-07-16 16:20:44.289  Error: #118 /lib/libpython3.5m.so : Py_NewInterpreter + 0x1d5 [0x7f069b724be5]
2020-07-16 16:20:44.289  Error: #119 /usr/local/domoticz/bin/domoticz : Plugins::CPlugin::Initialise() + 0x3c [0xa3d66c]
2020-07-16 16:20:44.289  Error: #120 /usr/local/domoticz/bin/domoticz : Plugins::InitializeMessage::Process() + 0x2a [0xa418ea]
2020-07-16 16:20:44.289  Error: #121 /usr/local/domoticz/bin/domoticz : Plugins::CPluginSystem::Do_Work() + 0x319 [0xa42979]
2020-07-16 16:20:44.289  Error: #122 /usr/local/domoticz/bin/domoticz : execute_native_thread_routine + 0x30 [0xc28686]
2020-07-16 16:20:44.289  Error: #123 /lib/libpthread.so.0 :  + 0x72c4 [0x7f069d3472c4]
2020-07-16 16:20:44.289  Error: #124 /lib/libc.so.6 : clone + 0x6d [0x7f069c09f10d]

Good to say that I have reversed back to version 2020.1 and replaced the database from an backup and then it's back working with the same plugins. Updating to 2020.2 again gives the same problem...

[Sjaakios]

@jumbotroll, when you are planning to do a batch of updates, could you also include a build for the new DS220+ (Geminilake)? Would be much appriciated!

[jendapl]

Hi,
has anyone succeeded to get Accuweather working on Synology? I got my developer account, my api key, location, but the only log info in Domoticz is AccuWeather Worker stopped...
I have tried stable 2020.1 and now on 2020.2 on Synology DS418. When I enter the URL in browser with my apikey it returns correct answer...
https://dataservice.accuweather.com/loc ... ikey="here is my api key"="here latitude, longitude in numbers"
thanks a lot

[jendapl]

Accuweather update on synology
now after entering the same info the 20th times it started to return some info. Excellent.

[Underfunded]

I just got the Synology DS920+ and am wondering if you are planning on compiling a Gemini Lake version?

[jumbotroll]

I just got the Synology DS920+ and am wondering if you are planning on compiling a Gemini Lake version?

Test version Domoticz Beta for Geminilake.
Download here:
http://www.jadahl.com/

[jumbotroll]

Test version Domoticz Beta for Geminilake is uploaded.

Download here: http://www.jadahl.com/

[Sjaakios]

great, thanks! Hopefully i get arround and test it in the coming days!

[Sjaakios]

Geminilake works as a charm here! Including custom plugins, zwave!

Thanks

[jumbotroll]

Geminilake works as a charm here! Including custom plugins, zwave!

Thanks

Nice!
Thanks for feedback!

[maartenvl]

How stable is the beta so far? Are there lots of changes expected till it's not beta anymore?

[jimmyad07]

All updates so far are running smoothly on my DS414, thanks for the updates.
Just a reminder to you all: maybe a (small) donation for Jumbotroll would be great. If you appreciate.....donate !

[whistler]

NEW! Domoticz Beta version 2020.2 for synology uploaded for testing.

http://www.jadahl.com

@jumbotroll
I upgraded from 2020.1.11835-8 to 2020.2.12213-8 (cedarview version, DS412+) and domoticz hangs / stops after the start. I had to go back to 2020.1

I have also seen that this happens occasionally in recent versions. I have not located the problem, but if you press RUN a couple of times in the package center on domoticz, it tends to start. It also usually starts immediately after a reboot of the NAS.
If you use Python plugin, it can be a plugin problem?
Remember to also install official Python3 package from synology first if you install domoticz with python or domoticz will not run.

Hi,
For me Domoticz beta ver. 2020.2.12213-8 (on Synology DS215j) does not work at all. The installation went smoothly, but now even trying to restart Domoticz several times does not work. So all my sensors and actors got stupid. I am waiting for a new beta update hoping that Domoticz will start working again.
Best regards