Netatmo thermostat support Topic is solved

Use this forum to discuss possible implementation of a new feature before opening a ticket.
A developer shall edit the topic title with "[xxx]" where xxx is the id of the accompanying tracker id.
Duplicate posts about the same id. +1 posts are not allowed.

Moderators: leecollings, remb0

Jazzle
Posts: 21
Joined: Friday 31 March 2017 13:16
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: Netatmo thermostat support

Post by Jazzle »

Anyone reading this has managed to get a Vaillant vSmart (rebranded NetAtmo thermostat) working in Domoticz?
pipiche
Posts: 1975
Joined: Monday 02 April 2018 20:33
Target OS: Raspberry Pi / ODroid
Domoticz version: beta
Location: France
Contact:

Re: Netatmo thermostat support

Post by pipiche »

Just to let you know that Netatmo Valves are available on Beta from version #9433 or higher
Zigbee for Domoticz plugin / RPI3B+ / Electrolama ZZH-P / 45 devices

If the plugin provides you value, you can support me with a donation Paypal.

Wiki is available here.

Zigbee for Domoticz FAQ
NeoMod
Posts: 21
Joined: Friday 07 July 2017 22:02
Target OS: Raspberry Pi / ODroid
Domoticz version: Latest β
Location: Italy
Contact:

Re: Netatmo thermostat support

Post by NeoMod »

deejc wrote: Thursday 03 March 2016 11:54 I set mine (in hardware) if no response in 15 minutes it restarts the worker

Image


Sent from my iPhone using Tapatalk
Thank you! I know it's an old post but indeed this simple trick solved my problem.
pipiche
Posts: 1975
Joined: Monday 02 April 2018 20:33
Target OS: Raspberry Pi / ODroid
Domoticz version: beta
Location: France
Contact:

Re: Netatmo thermostat support

Post by pipiche »

You right. I made a 15' timeout as well, as I was loosing connectivity !
Zigbee for Domoticz plugin / RPI3B+ / Electrolama ZZH-P / 45 devices

If the plugin provides you value, you can support me with a donation Paypal.

Wiki is available here.

Zigbee for Domoticz FAQ
xavierlp
Posts: 70
Joined: Tuesday 01 November 2016 16:22
Target OS: Raspberry Pi / ODroid
Domoticz version: 2020.2
Location: France
Contact:

Re: Netatmo thermostat support

Post by xavierlp »

Hello pipiche

I've got 2 Netatmo vannes, and I'd like to know how you can see it?

I'm using stable version V4.97

Thanks a lot
pipiche
Posts: 1975
Joined: Monday 02 April 2018 20:33
Target OS: Raspberry Pi / ODroid
Domoticz version: beta
Location: France
Contact:

Re: Netatmo thermostat support

Post by pipiche »

YOu might have to delete the Netamo Hardwar from Domoticz and add it again
Zigbee for Domoticz plugin / RPI3B+ / Electrolama ZZH-P / 45 devices

If the plugin provides you value, you can support me with a donation Paypal.

Wiki is available here.

Zigbee for Domoticz FAQ
User avatar
BazsoDombiAndras
Posts: 56
Joined: Thursday 08 January 2015 9:52
Target OS: Raspberry Pi / ODroid
Domoticz version: v4.10717
Location: Cluj-Napoca, Romania
Contact:

Re: Netatmo thermostat support

Post by BazsoDombiAndras »

Hello Guys!

I have recently re-built my Domoticz server from zero because the old one had lots and lots of reliability problems. In the new Domoticz server running the latest version I have noticed a few good and bad changes about the Netatmo thermostat (compared to how it worked in the old version):

Good:
- There is individual support for every room controlled by Netatmo thermostat and/or smart radiator valves

Bad:
- All the Netatmo thermostat devices in Domoticz fail to refresh for many hours and then they refresh and then they don't get refreshed for many hours again. There's something wrong here... And I see that this problem has been reported in this thread by several users 3 years ago already. Yes, sure, we can set a data timeout, but that's a workaround, not a fix... any chance this will be fixed?
- In the old version there used to be also a switch showing the state of the main thermostat (basically the state of the boiler)(ON/OFF). I can't find that in the new version
- There is an "Away" switch for each individual room. That's not how it works in Netatmo. In Netatmo there is one global away switch. Even in Domoticz all the away switches for all rooms are somehow tied together. If you modify the state of one of them, all the others automatically get the same state. So I don't see why there are many of them...
pozidz
Posts: 6
Joined: Friday 30 March 2018 12:51
Target OS: Raspberry Pi / ODroid
Domoticz version: V4.10162
Contact:

Re: Netatmo thermostat support

Post by pozidz »

Hi there,
BazsoDombiAndras wrote: Wednesday 07 November 2018 20:51
Bad:
- All the Netatmo thermostat devices in Domoticz fail to refresh for many hours and then they refresh and then they don't get refreshed for many hours again. There's something wrong here... And I see that this problem has been reported in this thread by several users 3 years ago already. Yes, sure, we can set a data timeout, but that's a workaround, not a fix... any chance this will be fixed?
Did this happened before too?
Do Neatmo APP get properly updated?

Regards.
Pozidz
User avatar
BazsoDombiAndras
Posts: 56
Joined: Thursday 08 January 2015 9:52
Target OS: Raspberry Pi / ODroid
Domoticz version: v4.10717
Location: Cluj-Napoca, Romania
Contact:

Re: Netatmo thermostat support

Post by BazsoDombiAndras »

This only happens with the new version of Domoticz. Yes, the Netatmo app refreshes properly. The problem seems to be in Domoticz.
jorijnsmit
Posts: 5
Joined: Wednesday 31 October 2018 7:02
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: Netatmo thermostat support

Post by jorijnsmit »

Does Domoticz support Netatmo's valves directly or is there always a need for the Netatmo's Relay as well?

I guess the valves do not communicate over Wi-Fi directly but will always need the Relay in order to be controlled and read out correctly. Is this true?
User avatar
BazsoDombiAndras
Posts: 56
Joined: Thursday 08 January 2015 9:52
Target OS: Raspberry Pi / ODroid
Domoticz version: v4.10717
Location: Cluj-Napoca, Romania
Contact:

Re: Netatmo thermostat support

Post by BazsoDombiAndras »

The Netatmo system needs either a main thermostat or a boiler controller module, the valves do not work independently, they communicate over radio waves through some proprietary protocol, not WiFi. Only the main thermostat or the boiler controller module use WiFi.
yannig
Posts: 5
Joined: Tuesday 10 September 2019 10:15
Target OS: NAS (Synology & others)
Domoticz version: 4.10717
Contact:

Re: Netatmo thermostat support

Post by yannig »

Hi,

get some synchronization problem with Healthy Home Coach since July, see the following post here :
https://www.domoticz.com/forum/viewtopi ... 67#p223667

Regards
fabd
Posts: 11
Joined: Friday 15 January 2016 11:21
Target OS: -
Domoticz version:
Contact:

Re: Netatmo thermostat support

Post by fabd »

Hello

Up for the thread.

I have last domoticz version (beta) and after removing the netatmo hardware and create a new one, i don't have my valve in new device.
Only thermostat and weather station.

How to get the valve ?

thanks
albamatti
Posts: 10
Joined: Sunday 17 January 2016 21:47
Target OS: Raspberry Pi / ODroid
Domoticz version: 2020.1
Contact:

Re: Netatmo thermostat support

Post by albamatti »

Hi there,
I followed these instructions to get my Netatmo Valves visible. https://www.domoticz.com/wiki/Netatmo.
Without any succes. I'm using Version 2020.1 (March 22th 2020) on a RPI4.
It is possible to get my weatherstation-data into Domoticz. Anyone succeded in adding Netatmo Valves?
fabd
Posts: 11
Joined: Friday 15 January 2016 11:21
Target OS: -
Domoticz version:
Contact:

Re: Netatmo thermostat support

Post by fabd »

Hello

UP for the topik

One year have past; Still the same problem. I have the latest production version

Image
comment mettre un site en ligne gratuitement

After creating a new worker, i only see Thermostat and temperature sensor. I don't have my 7 valves

Even if i change manually the set point temperature on some valve, the discovered item remain the same.

Why ?
Sylar6725
Posts: 2
Joined: Friday 08 January 2021 12:29
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: Netatmo thermostat support

Post by Sylar6725 »

Hi

I have the same issue.

I have open a issue on github (https://github.com/domoticz/domoticz/issues/4402) but no anwser.

Maybe someone who have this problem can add a comment. Maybe I didn't explain myself correctly (i'm french).
albamatti
Posts: 10
Joined: Sunday 17 January 2016 21:47
Target OS: Raspberry Pi / ODroid
Domoticz version: 2020.1
Contact:

Re: Netatmo thermostat support

Post by albamatti »

I am having the same issue!
homeJLB
Posts: 53
Joined: Tuesday 16 October 2018 23:01
Target OS: Raspberry Pi / ODroid
Domoticz version: 2022.2
Contact:

Re: Netatmo thermostat support

Post by homeJLB »

I believe there is a new API from Netatmo

with differend types;

NETYPE_WEATHER_STATION
NETYPE_HOMECOACH
NETYPE_ENERGY
NETYPE_SECURITY

Not sure the plugin can use all the types
Sylar6725
Posts: 2
Joined: Friday 08 January 2021 12:29
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: Netatmo thermostat support

Post by Sylar6725 »

Good news

The Netatmo plugin has been fixed (https://github.com/domoticz/domoticz/pull/5174)

You need to install the beta version to have the fix
After that, you just have to authorize the detection of new devices, go to the hardware page, select the netatmo plugin and just click on modify.
Now the valves and thermostat are available in the devices ;)

:!: Make sure you have a backup in case the beta doesn't work properly.
No problem in my case
zicht
Posts: 251
Joined: Sunday 11 May 2014 11:09
Target OS: Windows
Domoticz version: 2023.1+
Location: NL
Contact:

Re: Netatmo thermostat support

Post by zicht »

dear

version 2022.1 14279

Netatmo coach (air quality sensor)
Netatmo correct detected on enabling hardware.
"Netatmo has found no devices" error after 10 minutes and keeps repeating on HW interval,

Code: Select all

2022-03-14 21:27:23.533 Status: Netatmo: No Weather Station devices found...
The values are not updated correctly, especialy CO2


Work around : set timeout on hardware tap on 10 minutes.

Code: Select all

 Status: Netatmo: Worker started...
This way the HW is restarted and values are captured as on initial detection

Br
Rpi & Win x64. Using : cam's,RFXCom, LaCrosse, RFY, HuE, google, standard Lua, Tasker, Waze traveltime, NLAlert&grip2+,curtains, vacuum, audioreceiver, smart-heating&cooling + many more (= automate all repetitive simple tasks)
Post Reply

Who is online

Users browsing this forum: Google [Bot] and 1 guest