Zigate/zigbee heal function?

[tjabas]

Hi!

i have some problems with my zigate, sometimes when i make a restart of Domoticz i notice that not all of my zigbee devices will connect, i have looked around alot on the web and this forum without any solutions, i have also tried different zigbee channels with no luck, it seems like for every reboot of the rpi i do i loose some nodes/devices in domoticz, the solution is to re pair the lost devices, that is not what i want to do, it takes some time to do it.
I also wonder if there is a heal function in the zigate plugin, like the one that z-wave uses?

[Damsee]

Not aware of any heal function with Zigate or Zigate plugin but you should investigate the reason and root cause of devices loss...

From my experience, it's better to set a fixed channel.
Did you experience some changes in the channel used by Zigate upon DZ reboot ?

[pipiche]

Hi!

i have some problems with my zigate, sometimes when i make a restart of Domoticz i notice that not all of my zigbee devices will connect, i have looked around alot on the web and this forum without any solutions, i have also tried different zigbee channels with no luck, it seems like for every reboot of the rpi i do i loose some nodes/devices in domoticz, the solution is to re pair the lost devices, that is not what i want to do, it takes some time to do it.
I also wonder if there is a heal function in the zigate plugin, like the one that z-wave uses?

Very strange .

(1) What is the firmware you are running on Zigate ? Firmware 3.0e has such issue, which is loosing devices after reboot
(2) After a reboot what does the logs said ? Maybe you are facing a configuration issue (like access right or something like that)

[tjabas]

The logs dont give me any error codes during the start of the zigate plugin, i use the latest 3.1b, i think its called, Im at work now, i will look at the logs more when home.

[pipiche]

If nothing in the log, and if you are able to pair other devices than this one, I beleive that is more that the Switch doesn't go in pairing mode.

[tjabas]

Now i have checked the version and im on 3.1a, so i installed the latest 3.1b and changed to beta , but now my ikea fyrtur blinds doesnt work, and i cant seem to pair them again, aaah im getting frustrated.