Hello all,
I build an ethernet gateway which seems to work fine, thorugh serial monitor i get no errors.
then when i try to connect a node they don't get an id assigned.
i get the following output. i now use a example sketch from mysensors.
406833 TSM:ID
406834 TSM:ID:REQ
406837 TSF:MSG:SEND,255-255-0-0,s=50,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK:
408844 TSM:ID
408845 TSM:ID:REQ
408848 TSF:MSG:SEND,255-255-0-0,s=13,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK:
410855 !TSM:ID:FAIL
410856 TSM:FAIL:CNT=7
410858 TSM:FAIL:DIS
410860 TSF:TDI:TSL
Node not getting an ID
Moderator: leecollings
-
- Posts: 104
- Joined: Saturday 25 November 2017 17:18
- Target OS: Raspberry Pi / ODroid
- Domoticz version: v3.8153
- Location: Czech Rep.
- Contact:
Re: Node not getting an ID
Which mysensors network are you using?
For RS485 auto ID is not working for example.
For RS485 auto ID is not working for example.
RPi2 Domoticz v 4.10717
10 x Sonoff Basic - ESPeasy
1 x Wemos D1 - ESPeasy
1 x Shelly Plus Plug S
1 x Sonoff S26 - ESPeasy
1 x Shelly 1
1 x MySensors HC-SR04
1 x MySenosrs wifi gateway
1 x RFLink
4x Cam IPC-T240H
10 x Sonoff Basic - ESPeasy
1 x Wemos D1 - ESPeasy
1 x Shelly Plus Plug S
1 x Sonoff S26 - ESPeasy
1 x Shelly 1
1 x MySensors HC-SR04
1 x MySenosrs wifi gateway
1 x RFLink
4x Cam IPC-T240H
-
- Posts: 2
- Joined: Thursday 15 August 2019 10:00
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Node not getting an ID
Which network? i'm using an ethernet gateway.
-
- Posts: 104
- Joined: Saturday 25 November 2017 17:18
- Target OS: Raspberry Pi / ODroid
- Domoticz version: v3.8153
- Location: Czech Rep.
- Contact:
Re: Node not getting an ID
MySensors is a network of nodes connected to Domoticz through the gateway ( ethernet or USB ).Which network? i'm using an ethernet gateway.
Nodes are connected to gateway via radio ( NRF24 or RFM69 ) or RS485 bus.
Nodes can ask gateway for node ID and gateway will send them unique ID.
But this is not working with RS485bus.
Gateway has always ID=0.
So if you have got only ethernet gateway and sensors connected to it, ID will be 0.
Or you mean sensor ( or child ) ID instead of node ID in your question.
RPi2 Domoticz v 4.10717
10 x Sonoff Basic - ESPeasy
1 x Wemos D1 - ESPeasy
1 x Shelly Plus Plug S
1 x Sonoff S26 - ESPeasy
1 x Shelly 1
1 x MySensors HC-SR04
1 x MySenosrs wifi gateway
1 x RFLink
4x Cam IPC-T240H
10 x Sonoff Basic - ESPeasy
1 x Wemos D1 - ESPeasy
1 x Shelly Plus Plug S
1 x Sonoff S26 - ESPeasy
1 x Shelly 1
1 x MySensors HC-SR04
1 x MySenosrs wifi gateway
1 x RFLink
4x Cam IPC-T240H
Who is online
Users browsing this forum: No registered users and 1 guest