Temperature setpoint problem
Moderator: leecollings
Temperature setpoint problem
I have especially bought Domoticz Pro app to have full controll of my Domoticz setup. I found out it is not possible to set temperature higher than 30'C in virtual thermostat. I have to controll my boiler and fireplace. It is very disapointed. Why it is so difficult to change it? Many users ask for it.
-
- Posts: 84
- Joined: Friday 12 August 2016 13:08
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Temperature setpoint problem
if you use the app, go to settings then to standard settings and here you can set the maximum and minimum temperature you can set as setpoint
Re: Temperature setpoint problem
Thank you very much. It works finally... 

-
- Posts: 11
- Joined: Wednesday 15 March 2017 10:45
- Target OS: Linux
- Domoticz version: 2023.2
- Contact:
Re: Temperature setpoint problem
I've installed Evohome with 4 remote controlled thermostats. The system is connected to Domoticz with the Evohome web interface. It's possible to change the setpoints of each thermostats in the API. But I can't change the set point with the Domoticz app.
- waaren
- Posts: 6028
- Joined: Tuesday 03 January 2017 14:18
- Target OS: Linux
- Domoticz version: Beta
- Location: Netherlands
- Contact:
Re: Temperature setpoint problem
on my (Android) mobile I have no problem changing the setPoint. What are your settings / versions ?Jonkheer wrote: ↑Monday 09 September 2019 22:38 I've installed Evohome with 4 remote controlled thermostats. The system is connected to Domoticz with the Evohome web interface. It's possible to change the setpoints of each thermostats in the API. But I can't change the set point with the Domoticz app.
Debian buster, bullseye on RPI-4, Intel NUC.
dz Beta, Z-Wave, RFLink, RFXtrx433e, P1, Youless, Hue, Yeelight, Xiaomi, MQTT
==>> dzVents wiki
dz Beta, Z-Wave, RFLink, RFXtrx433e, P1, Youless, Hue, Yeelight, Xiaomi, MQTT
==>> dzVents wiki
-
- Posts: 11
- Joined: Wednesday 15 March 2017 10:45
- Target OS: Linux
- Domoticz version: 2023.2
- Contact:
Re: Temperature setpoint problem
Version 0.2.135 built 6204 which is recent according to playstore. Selecting the device in the app gives me only the option to see the logging (day, month, year), the favorite option and info button which opens a new window with IDX number an the last seen status.
- waaren
- Posts: 6028
- Joined: Tuesday 03 January 2017 14:18
- Target OS: Linux
- Domoticz version: Beta
- Location: Netherlands
- Contact:
Re: Temperature setpoint problem
I use the same version. (selected temperature devices)Jonkheer wrote: ↑Thursday 12 September 2019 21:48 Version 0.2.135 built 6204 which is recent according to playstore. Selecting the device in the app gives me only the option to see the logging (day, month, year), the favorite option and info button which opens a new window with IDX number an the last seen status.
selected "Zet"
Debian buster, bullseye on RPI-4, Intel NUC.
dz Beta, Z-Wave, RFLink, RFXtrx433e, P1, Youless, Hue, Yeelight, Xiaomi, MQTT
==>> dzVents wiki
dz Beta, Z-Wave, RFLink, RFXtrx433e, P1, Youless, Hue, Yeelight, Xiaomi, MQTT
==>> dzVents wiki
-
- Posts: 11
- Joined: Wednesday 15 March 2017 10:45
- Target OS: Linux
- Domoticz version: 2023.2
- Contact:
Re: Temperature setpoint problem
Exactly what I had suspect on my device, but it's only performing as as thermometer. I'm missing the "Zet" button.waaren wrote: ↑Thursday 12 September 2019 22:48I use the same version. (selected temperature devices)Jonkheer wrote: ↑Thursday 12 September 2019 21:48 Version 0.2.135 built 6204 which is recent according to playstore. Selecting the device in the app gives me only the option to see the logging (day, month, year), the favorite option and info button which opens a new window with IDX number an the last seen status.
-
- Posts: 11
- Joined: Wednesday 15 March 2017 10:45
- Target OS: Linux
- Domoticz version: 2023.2
- Contact:
Re: Temperature setpoint problem
Suggestions anyone?
It’s only an issue for the Android devices. Some in house IOS systems (with Pilot) are also able to set the temperature.
It’s only an issue for the Android devices. Some in house IOS systems (with Pilot) are also able to set the temperature.
Who is online
Users browsing this forum: No registered users and 0 guests