Cam from RPI running Octoprint wont work

[matzeb74]

Hello,
I´ve a 3DPrinter and a RPI running Octoprint. on this RPI i´ve the Picam and running in Octoprint. I can reach the Cam via Browser outside of Octoprint. The URL is http://192.168.178.60:8080/?action=stream.

How can i use this Cam in Domoticz?

[Lyrex]

Facing the same issue. Neither stream or snapshot api calls working with domoticz. Any advices?

[Alomamabobo]

Hello,
Same issue here
Tried login/nologin, https/http port 443/80/8080 with no luck.

I found that I have a picture when swapping https to http on port 80 (weird, the full working path in all browsers is http://192.168.0.204:8080/?action=stream).

Good day

[DAVIZINHO]

hello,
any idea?

i have octoprint and this will be interesting.

[axel2906]

I known it's an old thread but i find the solution

you must set :

in ip address the ip of octoprint: 192.168.X.X

in port: 8080

in image url: ?action=snapshot
(user and password no needed)

ende3_1.JPG (65.71 KiB) Viewed 2126 times

[DinnerEland]

Hello,
I´ve a 3DPrinter and a RPI running Octoprint. on this RPI i´ve the Picam and running in Octoprint. I can reach the Cam via Browser outside of Octoprint. The URL is http://192.168.178.60:8080/?action=stream.

How can i use this Cam in Domoticz?

I faced the same issue, still facing that, no solution yet.

[Yokohama]

This is how i did it.
I created a camera in Domoticz, Protocol set to HTTP, Address is IP of Octoprint, Port is 8080, ImageURL is ?action=snapshot
Then connect this camera to a lightswitch, in my case the keep-alive (ping) of octoprint.
Below a picture of how it looks.
The other switch you see is the real on/off switch.

[ebretteville]

I known it's an old thread but i find the solution

you must set :

in ip address the ip of octoprint: 192.168.X.X

in port: 8080

in image url: ?action=snapshot
(user and password no needed)



ende3_1.JPG

Thks, it solved my problem