RFXCOM alarm with kerui device it works! what about K16 keyboard?

Zener · Post by **Zener** » Thursday 28 March 2019 11:35

Hey!

I just made my alarm system with Kerui devices. Tey are small and cheap:
I used these door sensor, which are easily recognise sending messages for Open/Close and panic mode:
https://fr.aliexpress.com/item/6pcs-lot ... 26744.html

For PIR i used those, very small, giving information about "Motion" :
https://fr.aliexpress.com/item/KERUI-P8 ... 34070.html

Now in order to control the alarm , I try to find information about K16 Kerui Keyboard? Does anyone test it? do you think it can send a message to RFXCOMM when RFIDTag ou password is Ok?

K16 Keybaord: https://fr.aliexpress.com/item/New-Hot- ... 21244.html

Thx you your help!

Zener · Post by **Zener** » Monday 01 April 2019 10:24

Nobody tested it?

Gerwin · Post by **Gerwin** » Monday 01 April 2019 16:04

should be great if that's working

Zener · Post by **Zener** » Monday 08 April 2019 10:21

I think I will have to do it on my own

Nobody seems to have already tested it!

johansson · Post by **johansson** » Saturday 27 April 2019 12:25

I ordered one for testing last year; does not work with RFXcom 433e, but AFAIK should be compatible with RFlink.

b_weijenberg · Post by **b_weijenberg** » Saturday 27 April 2019 13:21

Did you check with RFXmngr and the latest Pro1 firmware?
If not received sent the RAW data received in RFXmngr (enable only undec on) to support rfxcom.com

johansson · Post by **johansson** » Sunday 28 April 2019 20:17

Actually if I recall right, I was able to connect the keypad, but the chosen protocol interfered with the ones I was using so had to skip it for time being. Haven't tested with the latest software, but could try and send raw data over if needed.

b_weijenberg · Post by **b_weijenberg** » Sunday 28 April 2019 20:43

Protocols do not interfere in Pro1 firmware as in the previous Ext firmwares.

Zener · Post by **Zener** » Tuesday 30 April 2019 16:27

Seems to havesome testers! great!

johansson · Post by **johansson** » Saturday 04 May 2019 21:04

Dug out the keyboard after a while: indeed, it is now compatible with the Pro1 firmware. It shows up in devices list as three similar on/off -switches (arm away, arm home, disarm) that all remain On all the time. Did some testing with dzvents to utilize those for changing the security panel status, but with my non-existing skills had no luck so far. The problem is that as the switches are always on, don't know how to handle that in dzvents when the device state does not change.

Bottom line: Kerui K16 keyboard is found in Domoticz/RFXcom setup, but will require scripting to be usefull.

johansson · Post by **johansson** » Sunday 05 May 2019 12:23

A fast update - I sent the RFXmngr data to RFXcom support this morning and within hours an updated firmware including proper decoding of the Kerui panel was received. Seems to be working - great job, once again!

: Screen Shot 2019-05-05 at 13.20.03.png (24.08 KiB) Viewed 4063 times

Zener · Post by **Zener** » Thursday 13 June 2019 12:16

Nice! thank you. do you have a dedicated Firmware from RFXCOM?

johansson · Post by **johansson** » Monday 24 June 2019 16:48

Sorry, missed this one. No, it's not dedicated, i.e. support for the Kerui panel is included in the latest available fw (see blog: http://blog.rfxcom.com/?p=232), downloadable here.

Zener · Post by **Zener** » Thursday 25 July 2019 11:28

I tested it.It works well when you press the keyboard to send RFX orders.
I can't find how to send commande from RFX to Keyboard, for beeping for exemple or sending alarm.
One way com only.

renerene · Post by **renerene** » Thursday 25 July 2019 19:15

Bought the doordooswitches about 2 years ago. Bad battery life, ca 6 months. Led flash drains battery?
Use it with rfxcom and an extra on/off script.
Open close/state is not 100% reliable
Would not recomand them.

wvries · Post by **wvries** » Wednesday 18 September 2019 13:38

I am using this one:
https://www.aliexpress.com/item/3247019 ... 4c4dPtTGnM
Works perfectly with RFXCOM.
can use both registered (on the device itself) pin and RFID's (125Khz).

Golleman · Post by **Golleman** » Monday 04 November 2019 15:13

wvries wrote: ↑Wednesday 18 September 2019 13:38 I am using this one:
https://www.aliexpress.com/item/3247019 ... 4c4dPtTGnM
Works perfectly with RFXCOM.
can use both registered (on the device itself) pin and RFID's (125Khz).

How can the tags be programmed? Any best/good tags for recommendation?

pvklink · Post by **pvklink** » Thursday 30 January 2020 16:56

Does anybody made some progress with a keyboard?

I recently bought kerui pirs, doorsensors, remotes and a zwave alarm. It all works fine!.

Last thing i want is a panel on the wall so i can:

1) arm/disarm the domoticz secpanel (and the other way around, it has to sync with the secpanel off domoticz)
2) like to use the same securitynumber for the panel as defined in domoticz
3) use off tags

Does somebody has this working?

RFXCOM alarm with kerui device it works! what about K16 keyboard?

RFXCOM alarm with kerui device it works! what about K16 keyboard?

Re: RFXCOM alarm with kerui device it works! what about K16 keyboard?

Re: RFXCOM alarm with kerui device it works! what about K16 keyboard?

Re: RFXCOM alarm with kerui device it works! what about K16 keyboard?

Re: RFXCOM alarm with kerui device it works! what about K16 keyboard?

Re: RFXCOM alarm with kerui device it works! what about K16 keyboard?

Re: RFXCOM alarm with kerui device it works! what about K16 keyboard?

Re: RFXCOM alarm with kerui device it works! what about K16 keyboard?

Re: RFXCOM alarm with kerui device it works! what about K16 keyboard?

Re: RFXCOM alarm with kerui device it works! what about K16 keyboard?

Re: RFXCOM alarm with kerui device it works! what about K16 keyboard?

Re: RFXCOM alarm with kerui device it works! what about K16 keyboard?

Re: RFXCOM alarm with kerui device it works! what about K16 keyboard?

Re: RFXCOM alarm with kerui device it works! what about K16 keyboard?

Re: RFXCOM alarm with kerui device it works! what about K16 keyboard?

Re: RFXCOM alarm with kerui device it works! what about K16 keyboard?

Re: RFXCOM alarm with kerui device it works! what about K16 keyboard?

Re: RFXCOM alarm with kerui device it works! what about K16 keyboard?

Who is online