Monitor Belgian watermeter and gasmeter with Pi GPIO
Moderator: leecollings
-
- Posts: 204
- Joined: Monday 08 May 2017 20:48
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2022.1
- Location: Belgium
- Contact:
Re: Monitor Belgian watermeter and gasmeter with Pi GPIO
I use 1 RPI3 and two KY modules. One is connected to eg GPIO10, 3V and GND and the other module is connected to eg GPIO 12, 3V and GND
-
- Posts: 1
- Joined: Monday 02 April 2018 15:37
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.9165
- Location: Poland
- Contact:
Re: Monitor Belgian watermeter and gasmeter with Pi GPIO
HI,
I set everything up according to the first post, but receives an error message
"Error: EventSystem: in Gas: [string "commandArray = {} ..."]:19: attempt to perform arithmetic on a nil value "
could anyone help me solve the problem?
I set everything up according to the first post, but receives an error message
"Error: EventSystem: in Gas: [string "commandArray = {} ..."]:19: attempt to perform arithmetic on a nil value "
could anyone help me solve the problem?
-
- Posts: 19
- Joined: Monday 12 November 2018 19:05
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: Belgium
- Contact:
Re: Monitor Belgian watermeter and gasmeter with Pi GPIO
The final solution can be found here:
https://ehoco.nl/watermeter-uitlezen-in ... ua-script/
With that, it works great!
Thanks
https://ehoco.nl/watermeter-uitlezen-in ... ua-script/
With that, it works great!
Thanks
Raspberry Pi, RFXCOM - RFXtrx433 USB 433.92MHz Transceiver, OpenZWave USB
Who is online
Users browsing this forum: No registered users and 0 guests