How to ad barometic sensor

Moderator: leecollings

Post Reply
losholmen
Posts: 14
Joined: Saturday 14 January 2017 16:38
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

How to ad barometic sensor

Post by losholmen »

I'm looking for an instruction, how to wiring and program a barometic sensor type adafruit BPM 180 to rpi / domoticz


Skickat från min iPhone med Tapatalk
User avatar
carymay
Posts: 3
Joined: Wednesday 12 September 2018 9:18
Target OS: Linux
Domoticz version:
Location: Charlottesville, Virginia
Contact:

Re: How to ad barometic sensor

Post by carymay »

Posted by losholmen:
I'm looking for an instruction, how to write my essay and program a barometic sensor type adafruit BPM 180 to rpi / domoticz
Skickat från min iPhone med Tapatalk
Hello @losholmen,

Perhaps, one of the possible options is to have this sensor directly connected on the header pins and configured in hardware (since you will have to query I2C bus, since there's no XCLR pin on the BMP180) as I2C BMP085/180 in Domoticz. Have you checked the sensor user guide for Arduino on Adafruit?

-Cary
Toulon7559
Posts: 848
Joined: Sunday 23 February 2014 17:56
Target OS: Raspberry Pi / ODroid
Domoticz version: mixed
Location: Hengelo(Ov)/NL
Contact:

Re: How to ad barometic sensor

Post by Toulon7559 »

1. Connect BMP180-wiring as I2C-sensor to the header of the RPI.
2. Go to Domoticz-Dashboard/Setup/Hardware
2a. At the bottom select Type = I2C Sensors, select subtype BMP085/180, and Add
2b. In the window popping up insert an applicable name and activate for the device, and you are in business with Domoticz
3. Go Dashboard/Setup/Devices and you will see that device with a green icon at the right side.
Activate that icon and when blue it is part of your active configuration.
Set1 = RPI-Zero+RFXCom433+S0PCM+Shield for BMP180/DS18B20/RS485+DDS238-1ZNs
Set2 = RPI-3A++RFLinkGTW+ESP8266s+PWS_WS7000
Common = KAKUs+3*PVLogger+PWS_TFA_Nexus
plus series of 'satellites' for dedicated interfacing, monitoring & control.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests