Cheap chinese z-wave products

[terrorsource]

Mmmhm, looks like the script isn't fully working in production.

MASTER = connected to the black wire (single switch)
SLAVE = no black wire connected ( double switch)

When i press MASTER the lights will go ON but the SLAVE button does not switch ON
When i press SLAVE the lights will go ON and the MASTER button does switch ON

When MASTER turned lights ON, i need to press the button on SLAVE once to turn it ON and again to turn OFF, then MASTER will turn off and lights goes OFF.

EDIT: Problem is not the script. It's in the 1CH Wall Switches.
They don't always send their status to Domoticz when the physical button is pressed.

[sincze]

My aiming price is around 15-17 euro's. Even if I don't need them I buy them at these prices.
Neo Coolcam.PNG

next time you see them at that price, let me know!!!

@heggink. On your request.
http://www.tomtop.com/p-s1473eu.html

Around 17 euro now.

[remb0]

a new player in town:
Alfawise PE1004T Smart Plug Mini WiFi Socket EU Standard.
In flash sale for 7,95 euro. works with own IOS and Android app, Alexa and google home on Wifi, Domoticz compatible is not confirmed yet.

[jvdz]

Not really ZWave I guess but rather Wifi.

Jos

[snellejellep]

i have it and have taken it apart, it seems that the wifi chip is tasmota compatible so i will try to get it flashed

[snuiter]

hi snellejellep,
any luck on integrating the alfawise into domoticz? I also have received a few just now.

[snellejellep]

hi snellejellep,
any luck on integrating the alfawise into domoticz? I also have received a few just now.

I did not have time yet, will try soon

[LouiS22]

i have it and have taken it apart, it seems that the wifi chip is tasmota compatible so i will try to get it flashed

Where on earth the screws are? I haven't found them. Or do I have to use a scalp to dismount it?

[gerthjan]

Just a quick feedback.

Arrived yesterday: https://www.aliexpress.com/item/Z-wave- ... 0.0.QIDx6w

As I initially suspected, this is Heiman's smoke sensor - and it really is, detected as Smart Sensor HS1SA. The package is a pain white box with only chinese manual included, but you can find a detailed english version at z-wave alliance database. There's not much to configure, only wake-up time The inclusion a bit tricky: there's a small hole on the side of the device, you have to put a thin nail or something similar to it, an push it three times. Did a test, it's a noisy beep-beep-beep

@LouiS22, it's been a while that you've posted about the HS1SA smoke sensor. I was woundering. Did you get it to work with Domoticz? I've got exactly the same, but I can't get it to show up in my hardware list (see image 0x09). Do you have any tips on what i can try to make it work?
I'm using domoticz on my Synology NAS and have Aeotec ZW090 Z-Stick Gen5 EU (see image)

2018-11-29 10_44_50-Domoticz.png (16.12 KiB) Viewed 3448 times

[gerthjan]

Does anyone have experience with thishttps://nl.aliexpress.com/item/Z-wave-S ... 0.0.QIDx6w Z-wave smoke detector using Domoticz on a Synology NAS?
I've been trying to get it to work, but haven't been succesful.


I hope there are people who can give me some pointers.

[LouiS22]

Just a quick feedback.

Arrived yesterday: https://www.aliexpress.com/item/Z-wave- ... 0.0.QIDx6w

As I initially suspected, this is Heiman's smoke sensor - and it really is, detected as Smart Sensor HS1SA. The package is a pain white box with only chinese manual included, but you can find a detailed english version at z-wave alliance database. There's not much to configure, only wake-up time The inclusion a bit tricky: there's a small hole on the side of the device, you have to put a thin nail or something similar to it, an push it three times. Did a test, it's a noisy beep-beep-beep

@LouiS22, it's been a while that you've posted about the HS1SA smoke sensor. I was woundering. Did you get it to work with Domoticz? I've got exactly the same, but I can't get it to show up in my hardware list (see image 0x09). Do you have any tips on what i can try to make it work?
I'm using domoticz on my Synology NAS and have Aeotec ZW090 Z-Stick Gen5 EU (see image)2018-11-29 10_44_50-Domoticz.png

Yes, it's working, I think your network didn't recognize it properly (unknown). Try to exclude that unknown node (If I recall it, there's a small hole on the side of the sensor and you have to push it 5 times (not sure, please check the manual) to trigger the exclusion.

[Spymate]

does anyone have experience with these modules?

https://nl.aliexpress.com/item/Spetu-Z- ... 4c4dAnMQmR
https://nl.aliexpress.com/item/Spetu-Z- ... 4c4dAnMQmR

[nmaster]

Hi,

Does someone already used this product ?

https://nl.aliexpress.com/item/Spetu-Z- ... 1edfaMbysE

[sincze]

My aiming price is around 15-17 euro's. Even if I don't need them I buy them at these prices.
Neo Coolcam.PNG

next time you see them at that price, let me know!!!

@heggink. On your request.
http://www.tomtop.com/p-s1473eu.html

@heggink. On your request.
Around 18 euro now.

https://nl.aliexpress.com/item/NEO-COOL ... 57235.html

[heggink]

@sincze thx!

Verstuurd vanaf mijn SM-G955F met Tapatalk

[sincze]

@sincze thx!

Verstuurd vanaf mijn SM-G955F met Tapatalk

Here we go again 18.69
https://s.click.aliexpress.com/e/bvxyxXfi

[rrozema]

Wintersale at aliexpress:

€ 19,32 38%OFF | NEO COOLCAM NAS-WR01ZE Z-wave Plus Smart Power Plug EU Socket Smart Home Automation Systeem thuis
https://s.click.aliexpress.com/e/EFKVY5j

[akamming]

Does anyone have experience with the Heiman Humidity Sensor HS1HT-Z ?

I received this device yesterday from AliExpress. Temp sensor works ok, but humidity only works after factory reset for an certain amount of time and then gets stuck on a certain value. I am sure humidity changed after this, cause i tested by closing windows, turning off ventilation and turning on 2 hot showers in the bathroom. The entire room got wet. Temperature went up according to the sensor (OK!), and i did get a lot of updates also on the humidity, however they were all the same value

A few hours later it started working again by reporting other values and then a few hours later it was stuck again at the same percentage.

Does anyone have the same experienace with this sensor (implying that the sensor is too cheap and therefor unusable for humidity) ? Or is this just a faulty one...

[Alcloud]

Does anyone have experience with the Heiman Humidity Sensor HS1HT-Z ?

I received this device yesterday from AliExpress. Temp sensor works ok, but humidity only works after factory reset for an certain amount of time and then gets stuck on a certain value. I am sure humidity changed after this, cause i tested by closing windows, turning off ventilation and turning on 2 hot showers in the bathroom. The entire room got wet. Temperature went up according to the sensor (OK!), and i did get a lot of updates also on the humidity, however they were all the same value

A few hours later it started working again by reporting other values and then a few hours later it was stuck again at the same percentage.

Does anyone have the same experienace with this sensor (implying that the sensor is too cheap and therefor unusable for humidity) ? Or is this just a faulty one...

I have the same one, but my works ok..

[akamming]

[
I have the same one, but my works ok..

Good to know. I sent a message to the seller to send a new one...