Python plugin: Kodi
Moderator: leecollings
- Dnpwwo
- Posts: 819
- Joined: Sunday 23 March 2014 9:00
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: Melbourne, Australia
- Contact:
Re: Python plugin: Kodi
@Brutus,
The python plugin uses a different command set to the native implementation.
I've documented it on github: https://github.com/dnpwwo/Domoticz-Kodi-Plugin
The python plugin uses a different command set to the native implementation.
I've documented it on github: https://github.com/dnpwwo/Domoticz-Kodi-Plugin
The reasonable man adapts himself to the world; the unreasonable one persists to adapt the world to himself. Therefore all progress depends on the unreasonable man. George Bernard Shaw
- Brutus
- Posts: 249
- Joined: Friday 26 September 2014 9:33
- Target OS: Windows
- Domoticz version:
- Location: Netherlands
- Contact:
Re: Python plugin: Kodi
That explains a lot I need to use "Trigger"
Going to change my scripts tonight.
Thnx for your answer.
Going to change my scripts tonight.
Thnx for your answer.
1x Intel NUC8i5BEK (Windows 10 x64) Domoticz on Virtualbox with DietPi.
1x Aeon Labs USB Z-Stick S2
1x P1 Smart Meter USB
28x Fibaro Modules
SMA Solar System
Daikin Airco / Heating
Denon DHT-S716H & DSW-1H
1x Aeon Labs USB Z-Stick S2
1x P1 Smart Meter USB
28x Fibaro Modules
SMA Solar System
Daikin Airco / Heating
Denon DHT-S716H & DSW-1H
- Brutus
- Posts: 249
- Joined: Friday 26 September 2014 9:33
- Target OS: Windows
- Domoticz version:
- Location: Netherlands
- Contact:
Re: Python plugin: Kodi
So I changed my scripts. The "Trigger" Favorites works great.
But the Volume doesn't. That command isn't changed:
The Log says it works:
Using the manual remote control you can change the volume.
Am I doing something wrong?
Greetings
But the Volume doesn't. That command isn't changed:
Code: Select all
commandArray['Kodi TV Woonkamer'] = 'Set Volume 100'
Code: Select all
2018-06-07 18:17:20.530 (Kodi) onCommand called for Unit 1: Parameter 'Set Volume', Level: 100, Connected: True
Code: Select all
2018-06-07 19:00:23.003 (Kodi) Update 2:'80' (Kodi - Volume)
2018-06-07 19:00:23.446 (Kodi) Update 2:'82' (Kodi - Volume)
Greetings
1x Intel NUC8i5BEK (Windows 10 x64) Domoticz on Virtualbox with DietPi.
1x Aeon Labs USB Z-Stick S2
1x P1 Smart Meter USB
28x Fibaro Modules
SMA Solar System
Daikin Airco / Heating
Denon DHT-S716H & DSW-1H
1x Aeon Labs USB Z-Stick S2
1x P1 Smart Meter USB
28x Fibaro Modules
SMA Solar System
Daikin Airco / Heating
Denon DHT-S716H & DSW-1H
- Dnpwwo
- Posts: 819
- Joined: Sunday 23 March 2014 9:00
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: Melbourne, Australia
- Contact:
Re: Python plugin: Kodi
@Brutus,
You are sending the command to the wrong device. The plugin creates 4 devices , one of them is the 'Volume' device (Unit #3). Assuming ''Kodi TV Woonkamer" is what you named the hardware then try:
If you renamed the 'Volume' device to something else you will obviously need to use its new name
You should see some thing like this in the log:
You are sending the command to the wrong device. The plugin creates 4 devices , one of them is the 'Volume' device (Unit #3). Assuming ''Kodi TV Woonkamer" is what you named the hardware then try:
Code: Select all
commandArray['Kodi TV Woonkamer - Volume'] = 'Set Volume 100'
You should see some thing like this in the log:
Code: Select all
2018-06-07 18:17:20.530 (Kodi) onCommand called for Unit 3: Parameter 'Set Volume', Level: 100, Connected: True
The reasonable man adapts himself to the world; the unreasonable one persists to adapt the world to himself. Therefore all progress depends on the unreasonable man. George Bernard Shaw
- Brutus
- Posts: 249
- Joined: Friday 26 September 2014 9:33
- Target OS: Windows
- Domoticz version:
- Location: Netherlands
- Contact:
Re: Python plugin: Kodi
@Dnpwwo
That makes sense but still nothing changes:
Command:
Log:
Devices:
That makes sense but still nothing changes:
Command:
Code: Select all
commandArray[1]={['Kodi - Volume'] = 'Set Volume 75'}
Code: Select all
2018-06-08 08:41:50.148 (Kodi) onCommand called for Unit 3: Parameter 'Set Volume', Level: 75, Connected: True
1x Intel NUC8i5BEK (Windows 10 x64) Domoticz on Virtualbox with DietPi.
1x Aeon Labs USB Z-Stick S2
1x P1 Smart Meter USB
28x Fibaro Modules
SMA Solar System
Daikin Airco / Heating
Denon DHT-S716H & DSW-1H
1x Aeon Labs USB Z-Stick S2
1x P1 Smart Meter USB
28x Fibaro Modules
SMA Solar System
Daikin Airco / Heating
Denon DHT-S716H & DSW-1H
-
- Posts: 742
- Joined: Saturday 30 May 2015 22:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Contact:
Re: Python plugin: Kodi
@Dnpwwo:
Have you had time to look into my 'crash log' o Domoticz after the Kodi plugin didn't find Kodi for a second?
Have you had time to look into my 'crash log' o Domoticz after the Kodi plugin didn't find Kodi for a second?
jake wrote:I am running the last version of the Kodi plugin, 2.5.6
Today my Domoticz crashed: these are the last lines in the log:
First:then a couple seconds later:Code: Select all
(Kodi Woonkamer) Device has disconnected (Kodi Woonkamer) Update 9:'Screensaver' (Kodi Woonkamer - Status) (Kodi Woonkamer) Update 20:'20' (Kodi Woonkamer - Source) (Kodi Woonkamer) Update 2:'100' (Kodi Woonkamer - Volume) (Kodi Woonkamer) Update 0:'0' (Kodi Woonkamer - Playing)
The weird thing is that nobody used/started Kodi at all today. Kodi is running fine on it's own pi as well.Code: Select all
Error: Plugin: Connection Exception: 'resolve: Host not found (authoritative)' connecting to 'onHeartbeat:9090' (Kodi Woonkamer) Connect directive received, action initiation failed. Domoticz received fatal signal 11 !... /home/pi/domoticz/domoticz() [0x2522b8] /home/pi/domoticz/domoticz(_Z14signal_handleri+0x4c) [0x252370] /lib/arm-linux-gnueabihf/libc.so.6(__default_sa_restorer_v2+0) [0x76cb3180]
A restart of Domoticz got things rolling again, but a plugin crashing the whole setup wasn't what I had in mind today
-
- Posts: 742
- Joined: Saturday 30 May 2015 22:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Contact:
Re: Python plugin: Kodi
@Dnpwwo
You introduced the nice 'Rewind' feature that I use every time a Kodi video or audio starts while the receiver is still off.
I put the stream on 'pause', start/boot the receiver and rewind the playing stream, not to miss the start.
This works fine for 'Audio' (it rewinds and starts playing from 0.00), but 'Video' always keeps paused. Both 'audio' and 'video' trigger the same log registration, but for 'video' I always manually have to hit 'play' again (it also hasn't rewinded to 0:00)
Could it be something in the plugin that doesn't properly rewind 'video', that it differs from 'Audio'?
You introduced the nice 'Rewind' feature that I use every time a Kodi video or audio starts while the receiver is still off.
I put the stream on 'pause', start/boot the receiver and rewind the playing stream, not to miss the start.
This works fine for 'Audio' (it rewinds and starts playing from 0.00), but 'Video' always keeps paused. Both 'audio' and 'video' trigger the same log registration, but for 'video' I always manually have to hit 'play' again (it also hasn't rewinded to 0:00)
Code: Select all
2018-06-15 22:43:17.073 (Kodi Woonkamer) onCommand called for Unit 4: Parameter 'Rewind', Level: 0, Connected: True
- Dnpwwo
- Posts: 819
- Joined: Sunday 23 March 2014 9:00
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: Melbourne, Australia
- Contact:
Re: Python plugin: Kodi
@jake,
Theoretically it should work for every media type, the decription of the Kodi method is "Seek through the playing item" for the active player. The rewind method just does a seek to "0" which should be pretty robust in theory so I'm surprised you are having issues.
A couple of questions/suggestions:
Theoretically it should work for every media type, the decription of the Kodi method is "Seek through the playing item" for the active player. The rewind method just does a seek to "0" which should be pretty robust in theory so I'm surprised you are having issues.
A couple of questions/suggestions:
- One potential difference between audio and video is often duration. Could you try a short video (song length) or long audio (movie length) stream to see if stream length is a factor?
- Does seeking in general work on your video streams using the "Playing" device?
- You could try changing line 426 in plugin.py to be to move from a percentage based rewind to a time based one. (I haven't tried this and the doco is far from clear so it may be incorrect)
Code: Select all
self.KodiConn.Send('{"jsonrpc":"2.0","method":"Player.Seek","params":{"playerid":' + str(self.playerID) + ',"value":{ "hours":0, "minutes":0, "seconds":0, "milliseconds":0}}}')
The reasonable man adapts himself to the world; the unreasonable one persists to adapt the world to himself. Therefore all progress depends on the unreasonable man. George Bernard Shaw
-
- Posts: 742
- Joined: Saturday 30 May 2015 22:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Contact:
Re: Python plugin: Kodi
@Dpnwwo
I don't have a long audio and short video at hand.
Shuffling around during a video with the 'playing' device works fine, backwards, forward, no problem
I updated line 426 with the revised code, but the behaviour stays the same
The rewinding action for video is executed partly, because it does rewind the video to 0:00. It only doesn't start to play.
It doesn't make a difference whether I start a local video file or a video stream from an add-on like youtube or 'uitzending gemist', the Dutch replay service from the national television.
Anyhow, since I saw that the video file was properly rewinded, I added a 'Play' command with a 1 second delay (dzVents) to the rewind command. This works fine for video and doesn't seem to hurt (stutter) for audio.
I don't have a long audio and short video at hand.
Shuffling around during a video with the 'playing' device works fine, backwards, forward, no problem
I updated line 426 with the revised code, but the behaviour stays the same
The rewinding action for video is executed partly, because it does rewind the video to 0:00. It only doesn't start to play.
It doesn't make a difference whether I start a local video file or a video stream from an add-on like youtube or 'uitzending gemist', the Dutch replay service from the national television.
Anyhow, since I saw that the video file was properly rewinded, I added a 'Play' command with a 1 second delay (dzVents) to the rewind command. This works fine for video and doesn't seem to hurt (stutter) for audio.
-
- Posts: 667
- Joined: Wednesday 08 March 2017 9:42
- Target OS: Linux
- Domoticz version: 3.8993
- Location: Amsterdam
- Contact:
Re: Python plugin: Kodi
Hi All,
I get this error sometimes and then a Signal 11 error:
I get this error sometimes and then a Signal 11 error:
Code: Select all
2018-06-18 16:59:02.375 Error: Plugin: Connection Exception: 'resolve: Host not found (authoritative)' connecting to 'onHeartbeat:9090'
2018-06-18 16:59:02.375 (Kodi) Connect directive received, action initiation failed.
2018-06-18 16:59:02.376 Error: (Kodi) 'onConnect' failed 'AttributeError':''str' object has no attribute 'Address''.
2018-06-18 16:59:02.376 Error: Domoticz received fatal signal 11 !...
2018-06-18 16:59:02.379 Error: /home/pi/domoticz/domoticz() [0x25458c]
2018-06-18 16:59:02.379 Error: /home/pi/domoticz/domoticz(_Z14signal_handleri+0x4c) [0x254644]
2018-06-18 16:59:02.379 Error: /lib/arm-linux-gnueabihf/libc.so.6(__default_sa_restorer+0) [0x76c0a6b0]
RPi3 B+, Debain Stretch, Domoticz, Homebridge, Dashticz, RFLink, Milight, Z-Wave, Fibaro, Nanoleaf, Nest, Harmony Hub, Now try to understand pass2php
-
- Posts: 742
- Joined: Saturday 30 May 2015 22:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Contact:
Re: Python plugin: Kodi
Last night my domoticz crashed again on the same symptoms with the Kodi plugin. I have already put the "time out of lost devices" on 'false' before this crash.
-
- Posts: 742
- Joined: Saturday 30 May 2015 22:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Contact:
Re: Python plugin: Kodi
Tonight domoticz crashed again on Kodi. It is really a pity that the whole system goes down on a hiccup in a single plugin. In winter time I am running a virtual thermostat from domoticz. Downtime has effects by then . (on the WAF for sure)
In the meantime I now enabled all debugging on the Kodi plugin to have a better record at the next crash.
In the meantime I now enabled all debugging on the Kodi plugin to have a better record at the next crash.
- bizziebis
- Posts: 182
- Joined: Saturday 19 October 2013 14:00
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.8805
- Location: The Netherlands
- Contact:
Re: Python plugin: Kodi
The plugin doesn't work anymore in the latest beta (V4.9946)
The log is flooded with
It was working on a version of 7 July.
The log is flooded with
Code: Select all
2018-08-26 07:14:13.140 Error: (Kodi Python Beneden) 'onMessage' failed 'AttributeError':''dict' object has no attribute 'decode''.
2018-08-26 07:14:13.140 Error: (Kodi Python Beneden) ----> Line 638 in '/home/pi/domoticz/plugins/Domoticz-Kodi-Plugin/plugin.py', function onMessage
2018-08-26 07:14:13.140 Error: (Kodi Python Beneden) ----> Line 149 in '/home/pi/domoticz/plugins/Domoticz-Kodi-Plugin/plugin.py', function onMessage
2018-08-26 07:14:13.140 Error: (Kodi Python Beneden) 'onMessage' failed
Code: Select all
2018-08-26 07:23:05.297 Status: PluginSystem: Started, Python version '3.5.3'.
- Dnpwwo
- Posts: 819
- Joined: Sunday 23 March 2014 9:00
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: Melbourne, Australia
- Contact:
Re: Python plugin: Kodi
The currently maintained Kodi plugin is here: https://github.com/dnpwwo/Domoticz-Kodi-Plugin
Can you give that one a try and let me know if there are any issues
Can you give that one a try and let me know if there are any issues
The reasonable man adapts himself to the world; the unreasonable one persists to adapt the world to himself. Therefore all progress depends on the unreasonable man. George Bernard Shaw
- bizziebis
- Posts: 182
- Joined: Saturday 19 October 2013 14:00
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.8805
- Location: The Netherlands
- Contact:
Re: Python plugin: Kodi
Yes, I was using that already. Updated it this morning but it didn't work. But I see you updated it again and now it works
- Dnpwwo
- Posts: 819
- Joined: Sunday 23 March 2014 9:00
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: Melbourne, Australia
- Contact:
Re: Python plugin: Kodi
Yeah, I forgot to push the change.
Worked for me but no one else
Worked for me but no one else
The reasonable man adapts himself to the world; the unreasonable one persists to adapt the world to himself. Therefore all progress depends on the unreasonable man. George Bernard Shaw
-
- Posts: 667
- Joined: Wednesday 08 March 2017 9:42
- Target OS: Linux
- Domoticz version: 3.8993
- Location: Amsterdam
- Contact:
Re: Python plugin: Kodi
Hi All,
Version: 4.9957
Build Hash: edc90313
Compile Date: 2018-08-28 06:55:18
dzVents Version: 2.4.7
Python Version: 3.7.0 (default, Aug 28 2018, 09:30:30) [GCC 6.3.0 20170516]
After a clear reinstall of domoticz (because of a usb-stick failure) i get this error after restart domoticz
and see this error while running domoticz:
Can this happen because of install latest Python 3.7.0?
Version: 4.9957
Build Hash: edc90313
Compile Date: 2018-08-28 06:55:18
dzVents Version: 2.4.7
Python Version: 3.7.0 (default, Aug 28 2018, 09:30:30) [GCC 6.3.0 20170516]
After a clear reinstall of domoticz (because of a usb-stick failure) i get this error after restart domoticz
Code: Select all
2018-08-28 10:07:14.722 Status: (Kodi) Started.
2018-08-28 10:07:14.912 Status: (Kodi) Entering work loop.
2018-08-28 10:07:14.913 Status: (Kodi) Initialized version 2.6.4, author 'dnpwwo'
2018-08-28 10:07:14.916 Error: (Kodi) 'onStart' failed 'ValueError':'invalid literal for int() with base 10: 'null''.
2018-08-28 10:07:14.916 Error: (Kodi) ----> Line 629 in '/home/pi/domoticz/plugins/Domoticz-Kodi-Plugin/plugin.py'
2018-08-28 10:07:14.916 Error: (Kodi) ----> Line 92 in '/home/pi/domoticz/plugins/Domoticz-Kodi-Plugin/plugin.py'
Code: Select all
2018-08-28 10:09:23.326 (Kodi) Unhandled exception in onHeartbeat, forcing disconnect.
2018-08-28 10:09:23.328 (Kodi) Device has disconnected
RPi3 B+, Debain Stretch, Domoticz, Homebridge, Dashticz, RFLink, Milight, Z-Wave, Fibaro, Nanoleaf, Nest, Harmony Hub, Now try to understand pass2php
-
- Posts: 179
- Joined: Friday 12 July 2013 13:53
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta Ch
- Location: The Netherlands
- Contact:
Re: Python plugin: Kodi
@poudenes
Had exactly the same issue.
Solved by removing the Kodi plugin directory, and I cloned it again.
Had exactly the same issue.
Solved by removing the Kodi plugin directory, and I cloned it again.
-
- Posts: 742
- Joined: Saturday 30 May 2015 22:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Contact:
Re: Python plugin: Kodi
Domoticz crash because of error in Kodi plugin (version 2.5.6):
BTW, Kodi is still running fine.
Code: Select all
2018-09-24 17:16:13.064 Error: Plugin: Connection Exception: 'resolve: Host not found (authoritative)' connecting
2018-09-24 17:16:13.064 (Kodi Living) Connect directive received, action initiation failed.
2018-09-24 17:16:13.064 Error: Domoticz received fatal signal 11 !...
2018-09-24 17:16:13.066 Error: /home/pi/domoticz/domoticz() [0x254670]
2018-09-24 17:16:13.066 Error: /home/pi/domoticz/domoticz(_Z14signal_handleri+0x4c) [0x254728]
2018-09-24 17:16:13.067 Error: /lib/arm-linux-gnueabihf/libc.so.6(__default_sa_restorer_v2+0) [0x76c48180]
-
- Posts: 742
- Joined: Saturday 30 May 2015 22:40
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Contact:
Re: Python plugin: Kodi
Within 24hr, I experienced the same kind of error, with a slightly different log report:
Code: Select all
2018-09-25 18:34:39.809 (Kodi Living) Connected successfully to: 192.168.1.31:9090
2018-09-25 18:34:39.867 (Kodi Living) Update 2:'100' (Kodi Living - Volume)
2018-09-25 18:34:40.212 Error: Domoticz received fatal signal 11 !...
2018-09-25 18:34:40.227 Error: /home/pi/domoticz/domoticz() [0x254670]
2018-09-25 18:34:40.227 Error: /home/pi/domoticz/domoticz(_Z14signal_handleri+0x4c) [0x254728]
2018-09-25 18:34:40.227 Error: /lib/arm-linux-gnueabihf/libc.so.6(__default_sa_restorer_v2+0) [0x76ce7180]
2018-09-25 18:34:40.227 Error: /home/pi/domoticz/domoticz(_ZN7Plugins16CPluginTransport16VerifyConnectionEv+0x28
2018-09-25 18:34:40.227 Error: /home/pi/domoticz/domoticz(_ZN7Plugins7CPlugin7Do_WorkEv+0x19c) [0x5b504c]
2018-09-25 18:34:40.227 Error: /home/pi/domoticz/domoticz() [0x7e2258]
Who is online
Users browsing this forum: No registered users and 1 guest