Blockly examples

[henk99]

Thanks for your quick response, will try this!

[burton666]

I don't know if this has been answered already but I did not find it. What is the best way to create this scenario from using a motiondetector/PIR with a lamp.

1.When movement is detected lamp is turned on for 10 min.
2. if movement is detected when the lamp is on then the timer is reset to 10min again

Last time I tried I used the "set x = y after z seconds" and also "set x = y for z minutes" and I also tried using blocky to change a user variable from 0 to 1 in different ways. But none of them worked as expected. They always flicker when the previous timer ended even as the new timer where supposed to have started.

[EdddieN]

I think you may need to use some script for it... have you tried to trigger your event with a timer instead with a device? That way as far as the switch is ON it will keep resetting 10 minutes?

[EdddieN]

Is it possible to trigger a shell script after X seconds via blockly?

[corederoma82]

This is my blocky:
if time it's more than 21 and my playstation 4 is on, it active a scene that switch off all lights in the home and switch on the light near tv.

Immagine.png (7.56 KiB) Viewed 5015 times

But now I have a question; I see the log and this blocky runs every 2 minutes more or less, so there is no risk of ruining the light bulbs that receive continuous commands?

Thanks

[EdddieN]

You could add a variable to let
Know Domoticz that event has run and no need to keep issuing commands to the lights.

A bit like: if PS4 and >21 and userVar = 0 then
Switch on light and set userVar=1

Just make sure to reset userVar to zero when no longer the event applies.

Hope it helps

[corederoma82]

How is possible to reset var to 0?

[corederoma82]

How is possible to reset var to 0? Oh and what is Uservar?

[EdddieN]

A bit like: if PS4 and >21 and userVar = 0 then
Switch on light and set userVar=1
Else if PS4=off and/or.... (whatever) and userVar=1 then
Whatever you want to do and see userVar=0

[EdddieN]

UserVar is a user variable, look under setup menu, there’s an option under more options

[corederoma82]

UserVar is a user variable, look under setup menu, there’s an option under more options

Done, but script says : Error: EventSystem: Lua script error (Blockly), Name: Playstation_Accesa_1 => [string "result = 0; weekday = os.date('*t')['wday']; ..."]:1: ')' expected near 'comparevariable'

Immagine.png (13.59 KiB) Viewed 5006 times

[corederoma82]

Immagine.png (14.48 KiB) Viewed 5005 times

[gijsje]

You can also do in the first line IF tv=off and time........................
Then it will not start it again because the tv is already on

[corederoma82]

You can also do in the first line IF tv=off and time........................
Then it will not start it again because the tv is already on

???

[corederoma82]

What I wrong?

[jvdz]

You cannot do a SET Salone = Off And ...
This needs to be 2 separate set rows, one for the Swich and one for the variable.

Jos

[corederoma82]

How is possible create 2 separate set rows?

[jvdz]

Just drag and drop 2 separate set command.... as simple as that!.

[corederoma82]

Done!!!!! It seems to work properly.
Thanks very much guys

Immagine.png (22.65 KiB) Viewed 4990 times

[AllardSchaap]

Hi,

Just new Here. Allard is my name.

I try to make this work;



But it is not working, nothing happens.

Activating buttons in the switch window will work Well and the PIR also shown active with any movement.

In Domoticz setup the events button is active.

Any idears?

Thanks, Allard



Verzonden vanaf mijn iPad met Tapatalk