Dashticz - Bug report

[EdwinK]

Thanks. This fixed it.

Btw. I don't have js/main.custom so I guess it isn't needed to change there.

[Wob76]

Thanks. This fixed it.

Btw. I don't have js/main.custom so I guess it isn't needed to change there.

Now that I think about it I think those are my backup files when I made some changes to a couple of switches and removed the .0 from my thermostat what about the vendor folder, any idea on what that's for?

Sent from my SM-G935F using Tapatalk

[EdwinK]

No clue.

[gielie]

A fix for the above, The Levelnames are now being base64 encoded.

I modified js/main.js and js/main.custom (I'm not sure if both are needed), I also noticed the same files under vendor/js/ can anyone comment on if these are used or not?

Change
var names = device['LevelNames'].split('|');

To
var names = atob(device['LevelNames']).split('|');

Wob

This doesn't work for me, none of my selector switches are showing correctly, they are just empty block with just a title. Someone has a clue how to solve this?

[yfands]

Hello,

The 'build in' config editor errors at least two accounts after saving..

first:
It defaults to config['edit_mode'] = '0' wich wont work, the pages would not be refreshed anymore, changing it manualy into config['edit_mode'] = 0 works.

second:
Also any streetname (config['garbage_street'] = 1blablabla;) starting with a 1 like mine is treated as a number and the loading of the config will fail.

Maybe a general solution, treat numbers as numbers without the ' ' and strings as strings with the ' '

I downloaded beta version 2.3.5 comming from version 2 november 2017, Took me 3 days to look for a solution why the pages would not refresh
eventualy user Lokonli pointed me in the right direction of the edit_mode being wrong.

[yfands]

dashticz beta 2.3.5

Starting for the first time sliders at 100% will display 65535% after moving the slider it will display the rigth value.

slider_value.jpg (10.48 KiB) Viewed 4377 times

regards
Frank

[yfands]

Dashtitcz beta 2.3.5

Selection switch display fault.

dashticz_Keuzeschakelaar.jpg (11.96 KiB) Viewed 4375 times

should be..

domoticz_Keuzeschakelaar.jpg (29.92 KiB) Viewed 4374 times

regards
Frank

[Lokonli]

Hello,

The 'build in' config editor errors at least two accounts after saving..

first:
It defaults to config['edit_mode'] = '0' wich wont work, the pages would not be refreshed anymore, changing it manualy into config['edit_mode'] = 0 works.

second:
Also any streetname (config['garbage_street'] = 1blablabla;) starting with a 1 like mine is treated as a number and the loading of the config will fail.

Maybe a general solution, treat numbers as numbers without the ' ' and strings as strings with the ' '

I downloaded beta version 2.3.5 comming from version 2 november 2017, Took me 3 days to look for a solution why the pages would not refresh
eventualy user Lokonli pointed me in the right direction of the edit_mode being wrong.

A PR for the first issue has been created already. Probably will be merged with the new beta soon. I'll try to find a clean solution for the second issue as well. (without you having to relocate )

[EdwinK]

Dashtitcz beta 2.3.5

Selection switch display fault.


domoticz_Keuzeschakelaar.jpg




regards
Frank

To fix this (until a new release) is to edit main.js

I modified js/main.js and js/main.custom (I'm not sure if both are needed), I also noticed the same files under vendor/js/ can anyone comment on if these are used or not?

Change
var names = device['LevelNames'].split('|');

To
var names = atob(device['LevelNames']).split('|');

[DewGew]

A PR for the first issue has been created already. Probably will be merged with the new beta soon. I'll try to find a clean solution for the second issue as well. (without you having to relocate )

In main.js I changed

var names = device['LevelNames'].split('|');

to

var names = atob(device['LevelNames']).split('|');

then it worked. I have latest beta of domoticz I dont know if it work with erlier verisons of domoticz.

[yfands]

Thanks guys, fully up to date with the new (beta) versions now...

Regards
Frank

[DewGew]

Dashtitcz beta 2.3.5

Selection switch display fault.


domoticz_Keuzeschakelaar.jpg




regards
Frank

To fix this (until a new release) is to edit main.js

I modified js/main.js and js/main.custom (I'm not sure if both are needed), I also noticed the same files under vendor/js/ can anyone comment on if these are used or not?

Change
var names = device['LevelNames'].split('|');

To
var names = atob(device['LevelNames']).split('|');

This is fixed in the latest beta.

[yfands]

Hai
Dashticz version Beta 2.3.5
raspberry pi 3

Playing with the speak option

In the config.js
config['speak_lang'] = 'nl-NL';

and in a block definition the following dutch sentence (translated: The temperature has changed)
blocks['636_1']['speak'] = 'Temperatuur is gewijzigd';

The lady tries her best but can't pronounce the dutch sentence it is still english based.
So, what must I do for her to understand the sentence is dutch?
Isn't config['speak_lang'] = 'nl-NL'; in the config file enough ?

regards
Frank

[DewGew]

Hai
Dashticz version Beta 2.3.5
raspberry pi 3

Playing with the speak option

In the config.js
config['speak_lang'] = 'nl-NL';

and in a block definition the following dutch sentence (translated: The temperature has changed)
blocks['636_1']['speak'] = 'Temperatuur is gewijzigd';

The lady tries her best but can't pronounce the dutch sentence it is still english based.
So, what must I do for her to understand the sentence is dutch?
Isn't config['speak_lang'] = 'nl-NL'; in the config file enough ?

regards
Frank

What browser are you using? In edge speaks use windows standard. I suggest you try to set

config['speak_lang'] = '';

In chrome sometimes first speak after refresh browser it speaks english but after that it works. at least on my setup. The language is still little buggy.

[poudenes]

Hi All,

i have a problem with a switch selector and Dasthicz.

have those lines in my switch selector:

Screen Shot 2018-06-13 at 13.42.24.jpg

In Dashticz i see this:

Screen Shot 2018-06-13 at 13.48.24.jpg

and not the list in first image.

Does someone know what this can be?

[yfands]

Hai Poudenes

I think we are missing an image..

but regarding the switch selector there is a fix, I modified js/main.js and js/main.custom (I'm not sure if both are needed)?

Change
var names = device['LevelNames'].split('|');

To
var names = atob(device['LevelNames']).split('|');

regards
Frank

[yfands]

Hai
Dashticz version Beta 2.3.5
raspberry pi 3

Playing with the speak option

In the config.js
config['speak_lang'] = 'nl-NL';

and in a block definition the following dutch sentence (translated: The temperature has changed)
blocks['636_1']['speak'] = 'Temperatuur is gewijzigd';

The lady tries her best but can't pronounce the dutch sentence it is still english based.
So, what must I do for her to understand the sentence is dutch?
Isn't config['speak_lang'] = 'nl-NL'; in the config file enough ?

regards
Frank

What browser are you using? In edge speaks use windows standard. I suggest you try to set

config['speak_lang'] = '';

In chrome sometimes first speak after refresh browser it speaks english but after that it works. at least on my setup. The language is still little buggy.

I use firefox, but refuses to talk dutch, on the other hand Chrome speaks dutch out of the box, on windows at least 7 and on android.

[DewGew]

Hai Poudenes

I think we are missing an image..

but regarding the switch selector there is a fix, I modified js/main.js and js/main.custom (I'm not sure if both are needed)?

Change
var names = device['LevelNames'].split('|');

To
var names = atob(device['LevelNames']).split('|');

regards
Frank

This is fixed in the latest beta

[poudenes]

Hai Poudenes

I think we are missing an image..

but regarding the switch selector there is a fix, I modified js/main.js and js/main.custom (I'm not sure if both are needed)?

Change
var names = device['LevelNames'].split('|');

To
var names = atob(device['LevelNames']).split('|');

regards
Frank

This is fixed in the latest beta

Thanks. I will test this or update to latest with git pull


Verzonden vanaf mijn iPhone met Tapatalk Pro

[dorenberg]

Hi Guys, I am new to dashticz and my dashboard is growing well. However I have a small issue with the forecast.io pane. The font is white, but when there is a refresh of the frame the font goes dark grey. Is this normal? What can I do to remediate this?