Dashticz, alternative dashboard based on HTML, CSS, jQuery
Moderators: leecollings , htilburgs , robgeerts
robgeerts
Posts: 1273 Joined: Saturday 24 January 2015 22:12
Target OS: NAS (Synology & others)
Domoticz version: 3.7067
Location: NL
Contact:
Post
by robgeerts » Thursday 13 July 2017 16:32
Ok, didnt test with multiple lights (bought one for testing purposes, not 2
)
Hold on, will try to fix it!
EdwinK
Posts: 1820 Joined: Sunday 22 January 2017 21:46
Target OS: Raspberry Pi / ODroid
Domoticz version: BETA
Location: Rhoon
Contact:
Post
by EdwinK » Thursday 13 July 2017 16:57
I only have two because of Eneco's offer last year.
Running latest BETA on a Pi-3 | Toon® Thermostat (rooted) | Hue | Tuya | IKEA tradfri | Dashticz V3 on Lenovo Huawei Tablet | Conbee
ztorm
Posts: 20 Joined: Thursday 16 February 2017 10:15
Target OS: Raspberry Pi / ODroid
Domoticz version: 3.8153
Contact:
Post
by ztorm » Wednesday 02 August 2017 21:34
Is is possible to remove the color selector? I have white HUE lamps so I don't need the selector.
robgeerts
Posts: 1273 Joined: Saturday 24 January 2015 22:12
Target OS: NAS (Synology & others)
Domoticz version: 3.7067
Location: NL
Contact:
Post
by robgeerts » Wednesday 02 August 2017 21:43
The color selector should only appear if you configurated it as a RGBW-bulb in Domoticz?
ztorm
Posts: 20 Joined: Thursday 16 February 2017 10:15
Target OS: Raspberry Pi / ODroid
Domoticz version: 3.8153
Contact:
Post
by ztorm » Thursday 03 August 2017 8:21
The problem is, I have two Hue lamps (white) above my kitchen table that I want to control (dim, on/off) together with one dimmer switch. I made a group of the two lamps in a Hue-app and apparently Domoticz imports the group as a RGBW-type. I'm tying to figure out if it's possible to change that or to make a dimmer switch in Domoticz which controls both lamps.
freakshock
Posts: 64 Joined: Friday 14 April 2017 13:39
Target OS: NAS (Synology & others)
Domoticz version:
Location: The Netherlands
Contact:
Post
by freakshock » Sunday 06 August 2017 16:28
I noticed RGB support only seems to work for Milight bulbs with type RGBW in Domoticz.
Type RGBWW (v6 of the protocol) does not give me a color selector switch in Dashticz.
'Hal licht' is the only RGBW bulb I have, the others are a RGBWW (v6) type.
EDIT: Fixed by Rob now!
Attachments
milightdashticz.jpg (32.4 KiB) Viewed 3632 times
Last edited by
freakshock on Monday 07 August 2017 17:28, edited 1 time in total.
robgeerts
Posts: 1273 Joined: Saturday 24 January 2015 22:12
Target OS: NAS (Synology & others)
Domoticz version: 3.7067
Location: NL
Contact:
Post
by robgeerts » Sunday 06 August 2017 16:32
Could you send me the json-output of domoticz?
freakshock
Posts: 64 Joined: Friday 14 April 2017 13:39
Target OS: NAS (Synology & others)
Domoticz version:
Location: The Netherlands
Contact:
Post
by freakshock » Sunday 06 August 2017 17:06
Sent via PM!
EDIT: Fixed by Rob now!
perkonix
Posts: 2 Joined: Tuesday 08 August 2017 15:01
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:
Post
by perkonix » Saturday 12 August 2017 14:19
I also experience the issue of having a RGB selector for a Hue group containing only ambiance (RGBWW) lights. I guess there is an issue with Domoticz not choosing the correct type as domoticz says the group is RGBW instead of RGBWW. A single light from the group doesn't get the RGB selector.
The slider is functional in dashticz. But the color selector is not useful and I'd like to get rid of it.
I also added commented on this issue here:
https://github.com/domoticz/domoticz/issues/1202 I hope it can be in Domoticz itself. But for now, is there a workaround to hide it from dashticz?
Screen Shot 2017-08-12 at 13.58.27.png (98.19 KiB) Viewed 3573 times
Screen Shot 2017-08-12 at 14.15.23.png (49.45 KiB) Viewed 3573 times
freakshock
Posts: 64 Joined: Friday 14 April 2017 13:39
Target OS: NAS (Synology & others)
Domoticz version:
Location: The Netherlands
Contact:
Post
by freakshock » Monday 14 August 2017 20:11
perkonix wrote: ↑ Saturday 12 August 2017 14:19
But for now, is there a workaround to hide it from dashticz?
Rob temporarily removed the RGB colorpicker in the latest beta, so that's a solution until a better solution is found!
dutchdevil83
Posts: 130 Joined: Monday 31 October 2016 19:34
Target OS: Raspberry Pi / ODroid
Domoticz version: latest
Location: Netherlands
Contact:
Post
by dutchdevil83 » Wednesday 16 August 2017 21:10
freakshock wrote: ↑ Monday 14 August 2017 20:11
perkonix wrote: ↑ Saturday 12 August 2017 14:19
But for now, is there a workaround to hide it from dashticz?
Rob temporarily removed the RGB colorpicker in the latest beta, so that's a solution until a better solution is found!
mmm that`s why my color selector isn`t showing
hope this function is back soon...
maybe idea to make a changelog when putting beta`s online?
Hardware
1x Raspberry Pi
1x Razberry Z-Wave
1x RFXtrx433E
1x Toon
1x GoodWe Solarpanels
2x FGSD-002 Smoke Detector
1x FGBS-001 Binaire Sensor (RFID lezer)
7x FGMS-001 Motion Sensor
3x ZW089 Verzonken Deursensor
7x NC Wallplug
&lots of KaKu stuff
Frankieg60
Posts: 1 Joined: Monday 20 February 2017 11:36
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:
Post
by Frankieg60 » Wednesday 25 October 2017 14:28
Any news of the color selector? i would love to use it.
Swifty
Posts: 76 Joined: Saturday 31 December 2016 21:03
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:
Post
by Swifty » Wednesday 15 November 2017 14:17
Is the RGB selector still absent in Dashticz? - I've had a look through the github commits and can't see anything relevant, but wanted to check..
I will be rebuilding my dashboard later, so interested to know if this is working yet!
robgeerts
Posts: 1273 Joined: Saturday 24 January 2015 22:12
Target OS: NAS (Synology & others)
Domoticz version: 3.7067
Location: NL
Contact:
Post
by robgeerts » Wednesday 15 November 2017 20:58
I disabled it because there were some complaints, but you can test it when opening main.js en search for (twice):
removeRGBW
AND
removeRGBWW
You have to remove 'remove'
Swifty
Posts: 76 Joined: Saturday 31 December 2016 21:03
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:
Post
by Swifty » Friday 17 November 2017 16:34
Thanks Rob, I will manually enable it for now and see how it performs
Are there any plans to re-add a new version at any point?
htilburgs
Posts: 464 Joined: Tuesday 03 November 2015 11:01
Target OS: Raspberry Pi / ODroid
Domoticz version: Beta
Location: Netherlands
Contact:
Post
by htilburgs » Friday 17 November 2017 16:52
I've tested this option also in combination with Yeelight RGB LED (Wifi).
Works fabulous!!
Hardware:
RPi3 - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Fibaro Smoke Sensor - Yeelight RGBW Led bulb - Yeelight Smart LED Light Strip - Neo Coolcam PIR Motion Sensor - Neo Coolcam PowerPlug - Nest Thermostat v3
robgeerts
Posts: 1273 Joined: Saturday 24 January 2015 22:12
Target OS: NAS (Synology & others)
Domoticz version: 3.7067
Location: NL
Contact:
Post
by robgeerts » Friday 17 November 2017 22:17
Well, I'm not sure what the real complaints were..
If some people could test this too and share their results, please!
gijsje
Posts: 132 Joined: Saturday 19 August 2017 14:28
Target OS: NAS (Synology & others)
Domoticz version: Stable
Location: Berkel Enschot, NL
Contact:
Post
by gijsje » Friday 17 November 2017 22:25
Works good for me with mylight
Synology DS218+ - RFXtrx433 - Aeotec Z-Stick Gen5 - Toon Thermostat - Neo CoolCam plug - Neo CoolCam PIR - FIBARO PIR - Heiman Smart Smoke Senso - Neo CoolCam Leakage Detector - BeNext Tag Reader - P1 and S0 USB - many Mi-Light lights - KAKU switches
robgeerts
Posts: 1273 Joined: Saturday 24 January 2015 22:12
Target OS: NAS (Synology & others)
Domoticz version: 3.7067
Location: NL
Contact:
Post
by robgeerts » Friday 17 November 2017 22:42
Ok, please wait a day too see if it causes any loading problems (slowing things down)
I'll turn it on tomorrow of it seems ok
htilburgs
Posts: 464 Joined: Tuesday 03 November 2015 11:01
Target OS: Raspberry Pi / ODroid
Domoticz version: Beta
Location: Netherlands
Contact:
Post
by htilburgs » Saturday 18 November 2017 11:16
Until now no loading / slowing things down issues. Still working ok.
Maybe you can use a parameter, like config['use_rgb']=0 / 1 for showing or not??
Hardware:
RPi3 - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Fibaro Smoke Sensor - Yeelight RGBW Led bulb - Yeelight Smart LED Light Strip - Neo Coolcam PIR Motion Sensor - Neo Coolcam PowerPlug - Nest Thermostat v3
Users browsing this forum: No registered users and 1 guest