Dashticz - Function - RGB-support

Dashticz, alternative dashboard based on HTML, CSS, jQuery

Moderators: leecollings, htilburgs, robgeerts

robgeerts
Posts: 1273
Joined: Saturday 24 January 2015 22:12
Target OS: NAS (Synology & others)
Domoticz version: 3.7067
Location: NL
Contact:

Re: Dashticz - [BETA]Function - RGB-support

Post by robgeerts »

Ok, didnt test with multiple lights (bought one for testing purposes, not 2 :P)
Hold on, will try to fix it!
User avatar
EdwinK
Posts: 1820
Joined: Sunday 22 January 2017 21:46
Target OS: Raspberry Pi / ODroid
Domoticz version: BETA
Location: Rhoon
Contact:

Re: Dashticz - [BETA]Function - RGB-support

Post by EdwinK »

I only have two because of Eneco's offer last year.
Running latest BETA on a Pi-3 | Toon® Thermostat (rooted) | Hue | Tuya | IKEA tradfri | Dashticz V3 on Lenovo Huawei Tablet | Conbee
ztorm
Posts: 20
Joined: Thursday 16 February 2017 10:15
Target OS: Raspberry Pi / ODroid
Domoticz version: 3.8153
Contact:

Re: Dashticz - Function - RGB-support

Post by ztorm »

Is is possible to remove the color selector? I have white HUE lamps so I don't need the selector.
robgeerts
Posts: 1273
Joined: Saturday 24 January 2015 22:12
Target OS: NAS (Synology & others)
Domoticz version: 3.7067
Location: NL
Contact:

Re: Dashticz - Function - RGB-support

Post by robgeerts »

The color selector should only appear if you configurated it as a RGBW-bulb in Domoticz?
ztorm
Posts: 20
Joined: Thursday 16 February 2017 10:15
Target OS: Raspberry Pi / ODroid
Domoticz version: 3.8153
Contact:

Re: Dashticz - Function - RGB-support

Post by ztorm »

The problem is, I have two Hue lamps (white) above my kitchen table that I want to control (dim, on/off) together with one dimmer switch. I made a group of the two lamps in a Hue-app and apparently Domoticz imports the group as a RGBW-type. I'm tying to figure out if it's possible to change that or to make a dimmer switch in Domoticz which controls both lamps.
freakshock
Posts: 64
Joined: Friday 14 April 2017 13:39
Target OS: NAS (Synology & others)
Domoticz version:
Location: The Netherlands
Contact:

Re: Dashticz - Function - RGB-support

Post by freakshock »

I noticed RGB support only seems to work for Milight bulbs with type RGBW in Domoticz.
Type RGBWW (v6 of the protocol) does not give me a color selector switch in Dashticz.

'Hal licht' is the only RGBW bulb I have, the others are a RGBWW (v6) type.

EDIT: Fixed by Rob now! :)
Attachments
milightdashticz.jpg
milightdashticz.jpg (32.4 KiB) Viewed 3511 times
Last edited by freakshock on Monday 07 August 2017 17:28, edited 1 time in total.
robgeerts
Posts: 1273
Joined: Saturday 24 January 2015 22:12
Target OS: NAS (Synology & others)
Domoticz version: 3.7067
Location: NL
Contact:

Re: Dashticz - Function - RGB-support

Post by robgeerts »

Could you send me the json-output of domoticz?
freakshock
Posts: 64
Joined: Friday 14 April 2017 13:39
Target OS: NAS (Synology & others)
Domoticz version:
Location: The Netherlands
Contact:

Re: Dashticz - Function - RGB-support

Post by freakshock »

Sent via PM!

EDIT: Fixed by Rob now! :)
perkonix
Posts: 2
Joined: Tuesday 08 August 2017 15:01
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: Dashticz - Function - RGB-support

Post by perkonix »

I also experience the issue of having a RGB selector for a Hue group containing only ambiance (RGBWW) lights. I guess there is an issue with Domoticz not choosing the correct type as domoticz says the group is RGBW instead of RGBWW. A single light from the group doesn't get the RGB selector.

The slider is functional in dashticz. But the color selector is not useful and I'd like to get rid of it.

I also added commented on this issue here: https://github.com/domoticz/domoticz/issues/1202 I hope it can be in Domoticz itself. But for now, is there a workaround to hide it from dashticz?
Screen Shot 2017-08-12 at 13.58.27.png
Screen Shot 2017-08-12 at 13.58.27.png (98.19 KiB) Viewed 3452 times
Screen Shot 2017-08-12 at 14.15.23.png
Screen Shot 2017-08-12 at 14.15.23.png (49.45 KiB) Viewed 3452 times
freakshock
Posts: 64
Joined: Friday 14 April 2017 13:39
Target OS: NAS (Synology & others)
Domoticz version:
Location: The Netherlands
Contact:

Re: Dashticz - Function - RGB-support

Post by freakshock »

perkonix wrote: Saturday 12 August 2017 14:19 But for now, is there a workaround to hide it from dashticz?
Rob temporarily removed the RGB colorpicker in the latest beta, so that's a solution until a better solution is found!
dutchdevil83
Posts: 130
Joined: Monday 31 October 2016 19:34
Target OS: Raspberry Pi / ODroid
Domoticz version: latest
Location: Netherlands
Contact:

Re: Dashticz - Function - RGB-support

Post by dutchdevil83 »

freakshock wrote: Monday 14 August 2017 20:11
perkonix wrote: Saturday 12 August 2017 14:19 But for now, is there a workaround to hide it from dashticz?
Rob temporarily removed the RGB colorpicker in the latest beta, so that's a solution until a better solution is found!
mmm that`s why my color selector isn`t showing :lol:

hope this function is back soon...

maybe idea to make a changelog when putting beta`s online?
Hardware
1x Raspberry Pi
1x Razberry Z-Wave
1x RFXtrx433E
1x Toon
1x GoodWe Solarpanels
2x FGSD-002 Smoke Detector
1x FGBS-001 Binaire Sensor (RFID lezer)
7x FGMS-001 Motion Sensor
3x ZW089 Verzonken Deursensor
7x NC Wallplug
&lots of KaKu stuff
Frankieg60
Posts: 1
Joined: Monday 20 February 2017 11:36
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: Dashticz - Function - RGB-support

Post by Frankieg60 »

Any news of the color selector? i would love to use it.
Swifty
Posts: 76
Joined: Saturday 31 December 2016 21:03
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: Dashticz - Function - RGB-support

Post by Swifty »

Is the RGB selector still absent in Dashticz? - I've had a look through the github commits and can't see anything relevant, but wanted to check..

I will be rebuilding my dashboard later, so interested to know if this is working yet! :)
robgeerts
Posts: 1273
Joined: Saturday 24 January 2015 22:12
Target OS: NAS (Synology & others)
Domoticz version: 3.7067
Location: NL
Contact:

Re: Dashticz - Function - RGB-support

Post by robgeerts »

I disabled it because there were some complaints, but you can test it when opening main.js en search for (twice):

removeRGBW
AND
removeRGBWW

You have to remove 'remove' ;)
Swifty
Posts: 76
Joined: Saturday 31 December 2016 21:03
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: Dashticz - Function - RGB-support

Post by Swifty »

Thanks Rob, I will manually enable it for now and see how it performs :)

Are there any plans to re-add a new version at any point?
User avatar
htilburgs
Posts: 464
Joined: Tuesday 03 November 2015 11:01
Target OS: Raspberry Pi / ODroid
Domoticz version: Beta
Location: Netherlands
Contact:

Re: Dashticz - Function - RGB-support

Post by htilburgs »

I've tested this option also in combination with Yeelight RGB LED (Wifi).
Works fabulous!!
Hardware:
RPi3 - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Fibaro Smoke Sensor - Yeelight RGBW Led bulb - Yeelight Smart LED Light Strip - Neo Coolcam PIR Motion Sensor - Neo Coolcam PowerPlug - Nest Thermostat v3
robgeerts
Posts: 1273
Joined: Saturday 24 January 2015 22:12
Target OS: NAS (Synology & others)
Domoticz version: 3.7067
Location: NL
Contact:

Re: Dashticz - Function - RGB-support

Post by robgeerts »

Well, I'm not sure what the real complaints were..
If some people could test this too and share their results, please!
User avatar
gijsje
Posts: 132
Joined: Saturday 19 August 2017 14:28
Target OS: NAS (Synology & others)
Domoticz version: Stable
Location: Berkel Enschot, NL
Contact:

Re: Dashticz - Function - RGB-support

Post by gijsje »

Works good for me with mylight
Synology DS218+ - RFXtrx433 - Aeotec Z-Stick Gen5 - Toon Thermostat - Neo CoolCam plug - Neo CoolCam PIR - FIBARO PIR - Heiman Smart Smoke Senso - Neo CoolCam Leakage Detector - BeNext Tag Reader - P1 and S0 USB - many Mi-Light lights - KAKU switches
robgeerts
Posts: 1273
Joined: Saturday 24 January 2015 22:12
Target OS: NAS (Synology & others)
Domoticz version: 3.7067
Location: NL
Contact:

Re: Dashticz - Function - RGB-support

Post by robgeerts »

Ok, please wait a day too see if it causes any loading problems (slowing things down)
I'll turn it on tomorrow of it seems ok :)
User avatar
htilburgs
Posts: 464
Joined: Tuesday 03 November 2015 11:01
Target OS: Raspberry Pi / ODroid
Domoticz version: Beta
Location: Netherlands
Contact:

Re: Dashticz - Function - RGB-support

Post by htilburgs »

Until now no loading / slowing things down issues. Still working ok.
Maybe you can use a parameter, like config['use_rgb']=0 / 1 for showing or not??
Hardware:
RPi3 - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Fibaro Smoke Sensor - Yeelight RGBW Led bulb - Yeelight Smart LED Light Strip - Neo Coolcam PIR Motion Sensor - Neo Coolcam PowerPlug - Nest Thermostat v3
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest