Duco rf ventilation remote

thecosmicgate · Post by **thecosmicgate** » Sunday 20 December 2015 20:00

Is there anybody who also uses this remote for the duco air ventilion and got this working with RFlink ?
The remote itself is an battery powered control unit with 4 different buttons: 1,2,3 and auto .

SweetPants · Post by **SweetPants** » Sunday 20 December 2015 21:21

What are the specs of the remote in terms of frequency and protocol?
Does RFX-Manager see the remote?

Stuntteam · Post by **Stuntteam** » Monday 21 December 2015 0:19

Hi,

The Duco is, so far, not supported.
Use the RFLink Loader program and record the button signals with the debug mode.

cos4x4 · Post by **cos4x4** » Monday 08 February 2016 20:57

RF-apparatuur op 868 MHz see the manual http://www.duco.eu/Wes/CDN/1/Attachment ... 923179.pdf

Stuntteam · Post by **Stuntteam** » Monday 08 February 2016 23:45

That does not change anything.. RFlink already has some 868 protocols and when you use it with the right RF modules will work fine on that frequency. Just like the fact that it works on 315 mhz and 915 mhz.

thecosmicgate · Post by **thecosmicgate** » Tuesday 09 February 2016 22:07

Stuntteam : that would be nice ! Because we also we have this duco air system also

nosehook · Post by **nosehook** » Friday 01 April 2016 19:24

Is there an update on this?
I have Duco ventilationa and would very much like to implement it in my Domoticz setu.
Currently I run a Raspberry Pi with RFXcom 433E.
Can anyone tell me what hardware I'd need and how to implement it?

Dank,

Freek

thecosmicgate · Post by **thecosmicgate** » Saturday 09 April 2016 21:42

Hope this will be implemented.

leoncornelissen · Post by **leoncornelissen** » Sunday 01 January 2017 13:30

I'm very interested if this is implemented somehow in the mean while.
We bought a new house which contains a Duco box. My current Perilex solution does not fit there. The system works with RF but I hope there is a solution with RFXcom. Otherwhise I have to capture the signal myself and build a own solution.

pvm · Post by **pvm** » Thursday 29 June 2017 9:08

Any updates on this topic?
I'm also looking for a solution to connect to duco box. Now I'm using it with 2 rf sensors.

I did find this 'schakel contact' (switch contact) http://www.duco.eu/nl-nl-producten/nl-n ... kelcontact

Is that the way to go?

emiel · Post by **emiel** » Friday 29 September 2017 16:39

Stuntteam wrote: ↑Monday 21 December 2015 0:19 Hi,

The Duco is, so far, not supported.
Use the RFLink Loader program and record the button signals with the debug mode.

Hi Stuntteam

I've tried both 'Debug' and 'Unhandled' mode, but the tool doesn't show any signals.
Is there anything else I can try?

FYI, my module does detect other (supported) devices.

thecosmicgate · Post by **thecosmicgate** » Friday 13 October 2017 22:45

I think because Duco uses 866mhz

Sent from my SM-G935F using Tapatalk

Stuntteam · Post by **Stuntteam** » Saturday 14 October 2017 1:06

The Duco is using 868 mhz with FSK modulation.
We are working on it.

aDJa · Post by **aDJa** » Sunday 04 February 2018 15:33

Re-do since previous post was removed..

Hi there,

This is my first post, I've already red many topics with great interest. Thanks for that, great to see so many people participate and help each other.I am also curious how to connect to the Duco box, haven't tried so far but would be nice to control it without placing the extra 'wireless switches' inside the box.

The search continous..