Xiaomi Smart Home Suite (very cheap) compatibilty?

[pandemicz]

For all those of us, who had a problem with left click on wireless switch, there's a .150 update rolling out, which is fixing the problem, just checked.

[timh1004]

For all those of us, who had a problem with left click on wireless switch, there's a .150 update rolling out, which is fixing the problem, just checked.

Finally thanks for notifying!

Edit: mine‘s not yet ready for the update

[deennoo]

For all those of us, who had a problem with left click on wireless switch, there's a .150 update rolling out, which is fixing the problem, just checked.

OK cool which mihome app version dis you have ?

[pandemicz]

For all those of us, who had a problem with left click on wireless switch, there's a .150 update rolling out, which is fixing the problem, just checked.

OK cool which mihome app version dis you have ?

Currently on 4.3.11

[deennoo]

For all those of us, who had a problem with left click on wireless switch, there's a .150 update rolling out, which is fixing the problem, just checked.

OK cool which mihome app version dis you have ?

Currently on 4.3.11

Same for me, update Fw isn't available on my side...let's wait

[islandman]

OK cool which mihome app version dis you have ?

Currently on 4.3.11

Same for me, update Fw isn't available on my side...let's wait

You need to update the firmware from the gateway not the APP

[chatainsim]

Currently on 4.3.11

Same for me, update Fw isn't available on my side...let's wait

You need to update the firmware from the gateway not the APP

What do you meen by that ?
I'm checking the firmware update by opening Mi Home app, then select the gateway, three dots then Check for firmware update.

[deennoo]

Currently on 4.3.11

Same for me, update Fw isn't available on my side...let's wait

You need to update the firmware from the gateway not the APP

Thx bro...not my First update, just need to check it...and be sure...app update can improve Fw update since their is no other way to ask for it...

[DAVIZINHO]

hello!,
In xiaomi mihome app there is a easy scene that i want to replicate in domoticz.

Now i can create a scene with blocky that turn purifier on when detect movement in the sensor but i cant make this other scene:
"when move detector not detect move in 30 minutes, then purifier off"

Anyone can help me?. I tried with blocky but i cant

thanks
-David-

[pandemicz]

hello!,
In xiaomi mihome app there is a easy scene that i want to replicate in domoticz.

Now i can create a scene with blocky that turn purifier on when detect movement in the sensor but i cant make this other scene:
"when move detector not detect move in 30 minutes, then purifier off"

Anyone can help me?. I tried with blocky but i cant

thanks
-David-

Show what you got in Blocky

[marcotini]

I just update to the version 3.8424 and... why the water leak doesn't appear to the unused devices?

[borewicz]

Has anyone managed to start the (Xiaomi Aqara Temperature Humidity) pressure sensor with homebridge / edomoticz ?
EVE shows it as voltage sensor with "0" :/

[Peggy]

Hi everyone I wanted to ask if by accident there are working problems with aqara human body sensor and domoticz?

I have some issue with body sensor (1st gen) that doesn't detect motion but it's not related to Domoticz has I also can't see the motion in Mi Home.

My feedback, as I use 4 of them for alarm purpose :

- One have been triggering some "false positive" alerts during 4 weeks. Now it is back to normal.
- The last one I received, I put it above my front door, in a dry place, facing the ground. It immediatly started sending continuous motion alerts, non stop for 24h. Now it is indoor, no problem. I will check whether the other sensors get crazy as well outside.

The other ones are working fine.

[xbox2610]

Hi everyone I wanted to know if the aqara human body sensor work with domoticz?
Thank you

[timh1004]

Hi everyone I wanted to know if the aqara human body sensor work with domoticz?
Thank you

It does work! But the built in brightness sensor is not very accurate :-/

[timh1004]

I was able to update the gateway firmware to 1.4.1_150.0134 with the latest iOS version of the MiHome App. Finally, the left button of the wall switches works again!!

[DAVIZINHO]

hello!,
In xiaomi mihome app there is a easy scene that i want to replicate in domoticz.

Now i can create a scene with blocky that turn purifier on when detect movement in the sensor but i cant make this other scene:
"when move detector not detect move in 30 minutes, then purifier off"

Anyone can help me?. I tried with blocky but i cant

thanks
-David-

Show what you got in Blocky

i use this blocky to turn on the purifier.
But i want to create a blocky to turn OFF the purifier when not detect movement in "movement sensor" in 30 minutes

[deennoo]

hello!,
In xiaomi mihome app there is a easy scene that i want to replicate in domoticz.

Now i can create a scene with blocky that turn purifier on when detect movement in the sensor but i cant make this other scene:
"when move detector not detect move in 30 minutes, then purifier off"

Anyone can help me?. I tried with blocky but i cant

thanks
-David-

Show what you got in Blocky

i use this blocky to turn on the purifier.
But i want to create a blocky to turn OFF the purifier when not detect movement in "movement sensor" in 30 minutes

Use LUA that the only way to do your script

[DAVIZINHO]

Show what you got in Blocky

i use this blocky to turn on the purifier.
But i want to create a blocky to turn OFF the purifier when not detect movement in "movement sensor" in 30 minutes

Use LUA that the only way to do your script

ok, thanks for the info.
Can you tell me how can i make this on lua?.
I only need help for the "if" comand because i dont know how to program the "if sensor not detect move in 30min then"

[Egregius]

With pass2php:

Code: Select all

if(timestamp('motion')<time-1800&&status('motion')=='Off'&&status('purifier')=='On')sw('purifier','Off');

Can it be more simple?
Let's see how much code you'll need in lua to do the same...