Xiaomi Smart Home Suite (very cheap) compatibilty?

[Derik]

Ask it on the great topic please, and you Can look on m'y blog searching for yeelight give you some exemple for white model, yeelight api is similar for rgb

Sorry
mmm was thinking this was the great topic, when i search i see only this...
Perhaps a link to the good topic...


Thanks!

[corbin]

@DJ41

Yes its not that the Xiaomi app is bad at all, but using Domoticz opens up much more possibilities and can be quite powerful, and can be combined with devices from other manufacturers.

[corbin]

Perhaps a link to the good topic...

The Yeelight thread? viewtopic.php?f=11&t=13016

[corbin]

I don't know if there is one in Domoticz. It's just a water presence so I think that just 1 or 0 it's ok lol.

I think there is support for smoke alarm and gas alarm, i think this is the same, but water alarm

I could add it the same as the smoke alarm no problem, but hoping someone can suggest a more appropriate device.

[Kerel]

Anybody any idea whats the difference between:


https://www.gearbest.com/access-control/pp_626702.html

and


https://www.gearbest.com/living-applian ... 44665.html?

[benbammens]

Anybody any idea whats the difference between:


https://www.gearbest.com/access-control/pp_626702.html

and


https://www.gearbest.com/living-applian ... 44665.html?

Square is newer.

Verstuurd vanaf mijn SM-G930F met Tapatalk

[martijnm]

I believe they are the same except for a different brandname (Aqara vs. Xiaomi)

[TigroEHOT]

The square one includes pressure sensor.

[martijnm]

Really? I didn't know that. Very interesting feature. Thanks!

[chatainsim]

Code: Select all

2017-09-01 11:56:53.436 {"cmd": "read", "sid": "158d000170d676"}

Anybody ? Thanks

Don't know what this would be, what Xiaomi devices do you have?

I have the Gateway, 6 temperatures sensors (1st gen round), 2 power plug, 5 door sensros (3 1st gen, 2 2nd gen), 4 motion sensor (1st gen), 1 magic cube, 1 wireless wall double switch, 4 buttons (3 1st gen, 1 2nd gen) and 1 smoke detector.

[corbin]

Out of those, button 2nd gen and temperature sensor is what I don't have. Are all those devices working in Domoticz?

[Martins80]

Code: Select all

2017-09-01 11:56:53.436 {"cmd": "read", "sid": "158d000170d676"}

Anybody ? Thanks

Don't know what this would be, what Xiaomi devices do you have?

I have the Gateway, 6 temperatures sensors (1st gen round), 2 power plug, 5 door sensros (3 1st gen, 2 2nd gen), 4 motion sensor (1st gen), 1 magic cube, 1 wireless wall double switch, 4 buttons (3 1st gen, 1 2nd gen) and 1 smoke detector.

You can know whitch device is: in mihome enter the gateway->options->about->gateway information and search the device with this ID. You can know the type from the name in model.

[chatainsim]

Don't know what this would be, what Xiaomi devices do you have?

I have the Gateway, 6 temperatures sensors (1st gen round), 2 power plug, 5 door sensros (3 1st gen, 2 2nd gen), 4 motion sensor (1st gen), 1 magic cube, 1 wireless wall double switch, 4 buttons (3 1st gen, 1 2nd gen) and 1 smoke detector.

You can know whitch device is: in mihome enter the gateway->options->about->gateway information and search the device with this ID. You can know the type from the name in model.

I found this :

Code: Select all

2017-09-01 11:56:53.436 XiaomiGateway: unknown cmd received: read
2017-09-01 11:56:53.436 {"cmd": "read", "sid": "158d00015e9683"}
lumi.sensor_motion.v2

2017-09-01 11:56:53.436 XiaomiGateway: unknown cmd received: read
2017-09-01 11:56:53.436 {"cmd": "read", "sid": "158d0001a64ef5"}
lumi.sensor_magnet.aq2

2017-09-01 11:56:53.436 XiaomiGateway: unknown cmd received: read
2017-09-01 11:56:53.436 {"cmd": "read", "sid": "158d00012a42ca"}
lumi.plug.v1

2017-09-01 11:56:53.436 XiaomiGateway: unknown cmd received: read
2017-09-01 11:56:53.436 {"cmd": "read", "sid": "158d00015a8d79"}
lumi.sensor_ht.v1

2017-09-01 11:56:53.436 XiaomiGateway: unknown cmd received: read
2017-09-01 11:56:53.436 {"cmd": "read", "sid": "158d000182ec9e"}
lumi.sensor_ht.v1

2017-09-01 11:56:53.436 XiaomiGateway: unknown cmd received: read
2017-09-01 11:56:53.436 {"cmd": "read", "sid": "158d00017142ca"}
lumi.sensor_switch.aq2

2017-09-01 11:56:53.436 XiaomiGateway: unknown cmd received: read
2017-09-01 11:56:53.436 {"cmd": "read", "sid": "158d000170d676"}
lumi.sensor_ht.v1

I don't know what is this.

[joebar]

Out of those, button 2nd gen and temperature sensor is what I don't have. Are all those devices working in Domoticz?

Yes, although the temp 2 sensor generates separate devices and that is a bit of a problem for homebridge support.
The baro is presented as general device with pressure as secondary. It would be better if that is presented as a real barometric sensor, now domoticz and homebridge don't see it as a weather sensor.

[LeonvA]

Hello,

I have bought a Xiaomi gateway in China last week but it doesn't connect to Domoticz.
I can control the gateway and read the status of my temperature sensor in the Mi Home app.
I've enabled LAN Communication protocol in the Mi Home app and wrote down the password.
Then I added the new hardware in Domoticz with correct IP address, port 9898 and the correct password.
But then I can't see any new devices in the devices tab.
I've also tried it on a new installed raspberry pi with domoticz on a stand alone network but also no result.

anyone who can help me?

Thanks,
Leon

[Derik]

rtfm....

you must set the gateway in to develop mode...

[deennoo]

Hello,

I have bought a Xiaomi gateway in China last week but it doesn't connect to Domoticz.
I can control the gateway and read the status of my temperature sensor in the Mi Home app.
I've enabled LAN Communication protocol in the Mi Home app and wrote down the password.
Then I added the new hardware in Domoticz with correct IP address, port 9898 and the correct password.
But then I can't see any new devices in the devices tab.
I've also tried it on a new installed raspberry pi with domoticz on a stand alone network but also no result.

anyone who can help me?

Thanks,
Leon

What is you Fw version please ?

[matteos1]

i'de like to create a scene where when i close a door with xiaomi door sensor one light is on and when the door is open light is off.
how i can i make it possible??
thank you

[pvm]

Did you try a blockly event?

[Kerel]

I believe they are the same except for a different brandname (Aqara vs. Xiaomi)

Thanks mate.

And what about the difference between:


https://www.gearbest.com/access-control/pp_626703.html

and


https://www.gearbest.com/smart-light-bu ... 57677.html

Is the first link the most recent one? Any differences in technology?