Dashticz - Bug report

[robgeerts]

Something strange is going on with my temp sensors, they all have the code 'switch' and this is the result, it was fine before.

whats your config.js?

This is my code for the 4 temp sensors.

Code: Select all

blocks[304] = {} //Toon huiskamer temp
blocks[304]['switch'] = true
blocks[304]['width'] = 3

blocks[47] = {} //badkamer temp/hum
blocks[47]['switch'] = true
blocks[47]['width'] = 3

blocks[383] = {} //Temp buiten
blocks[383]['switch'] = true
blocks[383]['width'] = 3

blocks[605] = {} //Washok
blocks[605]['switch'] = true
blocks[605]['title'] = 'Washok'
blocks[605]['width'] = 3

When i remove the switch command at huiskamer and buiten it works, but the other 2 doesn't, it did work some time ago.
I think it has something to do with the type of sensor, the 2 with the reversed data/text also have a hum sensor, so in my config i put '47_1' and 47_2 for temp and hum, but i don't use the hum data. I tried to change the blocks info to blocks[47_1]['switch'] = true but this doesn't work.


The thing i never got to work is my Toon thermostaat to switch title/data, how can i do this, the simple [blocks]['switch'] = true doesn't work

Could you send me the json-output of the devices that arent working?

This works for my Toon:'

Code: Select all

blocks['144_2'] = {};
blocks['144_2']['switch'] = true;

try :

Code: Select all

blocks['news_2']['feed'] = 'https://cors-anywhere.herokuapp.com/http://feeds.feedburner.com/tweakers/nieuws'

For tweakers it works but for nu.nl it doesn't and i figured how it does work.
For nu.nl i took out the feeds.feedburner and it works, i don't know why.

This works for me:

Code: Select all

blocks['news_1'] = {};
blocks['news_1']['feed'] = 'https://cors-anywhere.herokuapp.com/http://www.nu.nl/rss/Algemeen';
blocks['news_1']['maxheight'] = 113;

[gielie]

Could you send me the json-output of the devices that arent working?

This works for my Toon:'

Code: Select all

blocks['144_2'] = {};
blocks['144_2']['switch'] = true;

I don't have the _1 or _2 in my Toon, this is the output of my toon thermostat. at least i get nothing if i tried that. btw, the underscore in the blocks as you show above doesnt work at all, i have to use the whole number without the underscore number otherwise it won't work. So for my badkmaer i use '47_1' for the temp only but in the blocks width etc i have to use 47, if i use '47_1' nothing happens

Code: Select all

 "AddjMulti" : 1.0,
         "AddjMulti2" : 1.0,
         "AddjValue" : 0.0,
         "AddjValue2" : 0.0,
         "BatteryLevel" : 255,
         "CustomImage" : 0,
         "Data" : "22.9 C",
         "Description" : "",
         "Favorite" : 1,
         "HardwareID" : 16,
         "HardwareName" : "Toon",
         "HardwareType" : "Toon Thermostat",
         "HardwareTypeVal" : 34,
         "HaveTimeout" : false,
         "ID" : "0001",
         "LastUpdate" : "2017-09-01 10:51:53",
         "Name" : "Huiskamer",
         "Notifications" : "false",
         "PlanID" : "3",
         "PlanIDs" : [ 3, 4 ],
         "Protected" : false,
         "ShowNotifications" : true,
         "SignalLevel" : "-",
         "SubType" : "LaCrosse TX3",
         "Temp" : 22.899999999999999,
         "Timers" : "false",
         "Type" : "Temp",
         "TypeImg" : "temperature",
         "Unit" : 1,
         "Used" : 1,
         "XOffset" : "0",
         "YOffset" : "0",
         "idx" : "304"
      },

This is the readout of my badkamer sensor, i can't it to switch, i tried [47],['47_1']

Code: Select all

 "AddjMulti" : 1.0,
         "AddjMulti2" : 1.0,
         "AddjValue" : -3.0,
         "AddjValue2" : 0.0,
         "BatteryLevel" : 100,
         "CustomImage" : 0,
         "Data" : "23.1 C, 52 %",
         "Description" : "",
         "DewPoint" : "12.71",
         "Favorite" : 1,
         "HardwareID" : 10,
         "HardwareName" : "Z-wave",
         "HardwareType" : "OpenZWave USB",
         "HardwareTypeVal" : 21,
         "HaveTimeout" : false,
         "Humidity" : 52,
         "HumidityStatus" : "Comfortable",
         "ID" : "0501",
         "LastUpdate" : "2017-09-01 10:52:55",
         "Name" : "Badkamer",
         "Notifications" : "false",
         "PlanID" : "3",
         "PlanIDs" : [ 3, 4 ],
         "Protected" : false,
         "ShowNotifications" : true,
         "SignalLevel" : "-",
         "SubType" : "WTGR800",
         "Temp" : 23.100000000000001,
         "Timers" : "false",
         "Type" : "Temp + Humidity",
         "TypeImg" : "temperature",
         "Unit" : 0,
         "Used" : 1,
         "XOffset" : "0",
         "YOffset" : "0",
         "idx" : "47"
      },

and this is my washer sensor

Code: Select all

"AddjMulti" : 1.0,
         "AddjMulti2" : 1.0,
         "AddjValue" : -1.3999999999999999,
         "AddjValue2" : 0.0,
         "BatteryLevel" : 255,
         "CustomImage" : 0,
         "Data" : "22.4 C, 53 %",
         "Description" : "",
         "DewPoint" : "12.35",
         "Favorite" : 0,
         "HardwareID" : 10,
         "HardwareName" : "Z-wave",
         "HardwareType" : "OpenZWave USB",
         "HardwareTypeVal" : 21,
         "HaveTimeout" : false,
         "Humidity" : 53,
         "HumidityStatus" : "Comfortable",
         "ID" : "1F01",
         "LastUpdate" : "2017-09-01 10:28:24",
         "Name" : "Washok",
         "Notifications" : "false",
         "PlanID" : "3",
         "PlanIDs" : [ 3 ],
         "Protected" : false,
         "ShowNotifications" : true,
         "SignalLevel" : "-",
         "SubType" : "WTGR800",
         "Temp" : 22.399999999999999,
         "Timers" : "false",
         "Type" : "Temp + Humidity",
         "TypeImg" : "temperature",
         "Unit" : 0,
         "Used" : 1,
         "XOffset" : "0",
         "YOffset" : "0",
         "idx" : "605"

I think it has to do with the humidity, the other temp sensors don't have a humidity option.

[godomogo]

A couple of things I've noticed with some of the thermostat blocks...

- The Temp+Hum sensor blocks will not resize. The screenshot shows the Thermostat column set to 12 wide. Though set to 6 (or other number) these blocks only display as the default 4 wide.
- Temp+Hum blocks show a comma instead of a decimal in values (66,9F vs 66.9F) even though the sensor values show decimals. The "single temp" sensor block (IDX 129) show the decimal as reported.
- The "Low Setpoint" block (IDX 126) will only accept pressing the "-" button to lower the temp. The "+" doesn't work, so as I'm testing all of this it's getting colder and colder in here
- The Fan Mode block doesn't show the sensor value (IDX 127) and instead just shows "On". The block acts like an on/off switch and flashes "Off" when I click it, but the value remains "On".

Spoiler: show

/* Thermostat start */
blocks['blocktitle_thermostat'] = {}
blocks['blocktitle_thermostat']['type'] = 'blocktitle';
blocks['blocktitle_thermostat']['title'] = 'Thermostat';

blocks[129] = {}
blocks[129]['title'] = 'Currently';
//blocks[129]['width'] = 5;

blocks['130_1'] = {}
blocks['130_1']['title'] = 'Temp';
blocks['130_1']['width'] = 6;

blocks['130_2'] = {}
blocks['130_2']['title'] = 'Humidity';
blocks['130_2']['width'] = 6;

blocks[126] = {}
blocks[126]['title'] = 'Cool Setting';
//blocks[126]['width'] = 5;

blocks[125] = {}
blocks[125]['title'] = 'Heat Setting';
//blocks[125]['width'] = 5;

blocks[124] = {}
blocks[124]['title'] = 'Mode';
//blocks[124]['width'] = 2;

blocks[127] = {}
blocks[127]['title'] = 'Fan';
blocks[127]['switch'] = true;
//blocks[127]['width'] = 2;
/* Thermostat end */

dashticz thermostat blocks.png (348.02 KiB) Viewed 3327 times

[HarryHase]

I'm using a P1 cable to monitor my smart meter but because i also have solar panels the energy usage is most of the time a minus number in domoticz dashboard it will show a negative value but in dashticz its always a positive number.

I have the same problem, is there a solution available?

[Derik]

mmm
Did not update for a long time.
Just update to the last beta.
And ONLY set my custom back.
Every time a splash screen...?
Where do i go wrong?

[sebasjuh]

I had a problem with my domoticz setup so I had to start all over again and now everything is working fine and i'm setting up Dashticz again.
Only I have a problem with my custom.js file.

In my CONFIG.js file I have added a block for my backdoor in my house

Code: Select all

//Blok achterdeur
blocks[79] = {}
blocks[79]['width'] = 4; //1 to 12, remove this line if you want to use the default (4)
blocks[79]['title'] = 'Achterdeur' //if you want change the name of switch different then domoticz
blocks[79]['show_lastupdate'] = true; //if you want to show the last update specific for this block
blocks[79]['protected'] = true; //protect switching manually in Dashticz

And in custom.js I added a code to change the text you see when the door opens or is closed.

Code: Select all

function getBlock_79(device,idx){ 
   $('.block_'+idx);
   var html='';
   html+='<div class="col-xs-4 col-icon">';
      if(device['Status']=='Off') html+='<img src="img/door_closed.png" class="off icon" />';
      else html+='<img src="img/door_closed.png" class="on icon" />';
   html+='</div>';
   html+='<div class="col-xs-8 col-data">';
   html+='<strong class="title">'+device['Name']+'</strong><br />';
   if(device['Status']=='Off') html+='<span class="state">DICHT</span>';
   else html+='<span class="state">OPEN</span>';
 
   if((_SHOW_LASTUPDATE && (typeof(blocks[idx])=='undefined' || typeof(blocks[idx]['hide_lastupdate'])=='undefined' || blocks[idx]['hide_lastupdate']===false)) || (!_SHOW_LASTUPDATE && (typeof(blocks[idx])!=='undefined' && typeof(blocks[idx]['show_lastupdate'])!=='undefined' && blocks[idx]['show_lastupdate']==true))  ){
          html+='<br /><span class="lastupdate">'+moment(device['LastUpdate']).format(_LASTUPDATE_FORMAT)+'</span>';
   }
   html+='</div>';
   return html;
}

In the previous setup I had this was working well only now it's not working anymore and instead of seeing the text OPEN or DICHT for the door status i see AAN or UIT. How come the function getBlock doesn't work anymore.....

Or were there some changes made in the last versions why this doesn't work anymore ?

[lupo2a]

Today I downloaded last Dashticz stable version and I'm I'm trying to configure it

I've got a Netatmo device.

Idx=66
Hardware:Netatmo
ID=365C
Unit:0
Name:Segrate_esterno
Type:Temp + Humidity
Subtype=WTGR800
Data=17.3 C, 80 %

In CONFIG.js i tried the following options but nothing is displayed
Looking at the source code of the page the best I can get is <div data-id="66_1" class="mh transbg block_66_1"></div> and nothing of course is displayed

Option1
columns[1]['blocks'] = ['blocktitle_global_controls',55,56,57,58,'66_1',83,76]

Option2
blocks['66_1'] = {}
blocks['66_1']['width'] = 4;
columns[1]['blocks'] = ['blocktitle_global_controls',55,56,57,58,'66_1',83,76]

Option3
blocks[66] = {}
blocks[66]['width'] = 4;
columns[1]['blocks'] = ['blocktitle_global_controls',55,56,57,58,'66_1',83,76]

Option4
blocks[66] = {}
blocks[66]['width'] = 4;
columns[1]['blocks'] = ['blocktitle_global_controls',55,56,57,58,66,83,76]

Option4
columns[1]['blocks'] = ['blocktitle_global_controls',55,56,57,58,66,83,76]

--
Raspberry PI 3
Domoticz V3.8451

[gijsje]

I am struggling with the doorbell status
In domoticz it show OFF and in dashticz it shows on
I have been looking but i can not find why this is
Can you point me in the direction where to look?

[vgr2]

With latest beta I lost the switches and devices from domoticz. With an older version it’s still working. Any help?

[lupo2a]

Umhh,
it works if I insert

config['use_favorites'] = 0;

in CONFIG.js.

Can someone better explain how this parameter affect Dashticz?

A

Raspberry PI 3
Domoticz: V3.8564
- Aeotec ZW090 Z-Stick Gen5 EU
- Neo CoolCam Door/Window Detector
- FIBARO FGWPE Wall Plug
- 6 FIBARO System FGRM222 Roller Shutter Controller 2
- Kodi Media Server

[CaesarPL]

If you want to do any customization on your dashboard - first of all you have to switch off two parameters, as described in Wiki:

config['auto_positioning'] 0 / 1 Make use of auto positioning for the Domoticz Favorites
config['use_favorites'] 0 / 1 If use auto positioning, then this item should be TRUE

Otherwise it just uses standard formatting and puts items on the screen not according to your wish.

[yfands]

Hello,

In the latest Beta version,Latest commit 447fede , with the temperature/humidity sensors, there is no hover, click or changed cursor action.
I'm I the only one , or ???

Frank

[woody4165]

With latest beta I lost the switches and devices from domoticz. With an older version it’s still working. Any help?

Do you have Spotify?
Remove it from columns and try again.
This was at least my issue and how I have solved.

[yfands]

Nop, No spotify.

also I found another issue with a temp/hygro sensor

The following block properties are not working

blocks[488]['icon'] = ''; //if you want an other icon instead of the default, choose from: http://fontawesome.io/cheatsheet/
blocks[488]['image'] = ''; //if you want to show an image instead if icon, place image in img/ folder
blocks[488]['switch'] = false; //if you want to switch the title and data
blocks[488]['hide_data'] = true; //if you want to hide the data of this block
blocks[488]['show_lastupdate'] = false; //if you want to show the last update specific for this block

The also former solution
blocks['488_1'] = {};
blocks['488_1']['switch'] = true;
etc is also not working

[MikeF]

Not sure if this has already been reported (didn’t find it): whenever I move the slider on my LightwaveRF dimmer, it snaps back to about 50% of the required value - suspect this is because it uses 32 steps, rather than the 16 steps of other dimmers.

[htilburgs]

Issue with Selector Switch.
In Domoticz there is the option to "hide off level". I use this option, but in Dashticz it's still showing.

Domoticz "Hide Off Level"

Domoticz-Off-Level.PNG (49.65 KiB) Viewed 2866 times

Dashticz still showing the "Off Level"

Dashticz-Off-Level.PNG (22.11 KiB) Viewed 2866 times

Code: Select all

{
         "AddjMulti" : 1.0,
         "AddjMulti2" : 1.0,
         "AddjValue" : 0.0,
         "AddjValue2" : 0.0,
         "BatteryLevel" : 255,
         "CustomImage" : 102,
         "Data" : "Set Level: 30 %",
         "Description" : "",
         "Favorite" : 1,
         "HardwareID" : 7,
         "HardwareName" : "Dummy Virtual Switch",
         "HardwareType" : "Dummy (Does nothing, use for virtual switches only)",
         "HardwareTypeVal" : 15,
         "HaveDimmer" : true,
         "HaveGroupCmd" : true,
         "HaveTimeout" : false,
         "ID" : "00014132",
         "Image" : "Rolluik",
         "IsSubDevice" : false,
         "LastUpdate" : "2017-10-21 12:02:59",
         "Level" : 30,
         "LevelActions" :,
         "LevelInt" : 30,
         "LevelNames" : "Off|Open|25%|50%|75%|Dicht",
         "LevelOffHidden" : true,
         "MaxDimLevel" : 100,
         "Name" : "Rolluik Woonkamer [Selector]",
         "Notifications" : "false",
         "PlanID" : "2",
         "PlanIDs" : [ 2 ],
         "Protected" : false,
         "SelectorStyle" : 0,
         "ShowNotifications" : true,
         "SignalLevel" : "-",
         "Status" : "Set Level: 30 %",
         "StrParam1" : "",
         "StrParam2" : "",
         "SubType" : "Selector Switch",
         "SwitchType" : "Selector",
         "SwitchTypeVal" : 18,
         "Timers" : "false",
         "Type" : "Light/Switch",
         "TypeImg" : "Light",
         "Unit" : 1,
         "Used" : 1,
         "UsedByCamera" : false,
         "XOffset" : "0",
         "YOffset" : "0",
         "idx" : "226"
      },

"LevelOffHidden" : true

[EdwinK]

Try this:

Screen Shot 2017-10-25 at 15.43.34.png (13.97 KiB) Viewed 2865 times

(hide off-switch) It's on the settings-page (see clogwheel)


Or use this in CONFIG.js

Code: Select all

config['hide_off_button'] = 1;

[htilburgs]

I thought I knew all the settings by now, but not.... (feeling a littlebit ashamed)...
Thanks Edwin, that does the trick!

[EdwinK]

Now maybe you can helo me with some things

Not sure when this started, but getting loads of these messages now in Console.

Slow network is detected. Fallback font will be used while loading: http://192.168.0.10/dashboard/css/fonts ... f2?v=1.1.0

Also, since some time buttons.webcam and buttons.moon are no longer working

3rd When playing LMS the title is not shown, or just for a few seconds, before disappearing.

I'm using the Menu thingy from page 12 of the show your dashboard post

[htilburgs]

Edwin, can you rule out that it has something to do with the menu thing from page 12??? This is a ‘not tested / supported’ change in Dashticz.

I’m currently using the latest beta on a RPi2, that also is configured as DHCP server and VPN server. I don’t have these issues and using a little bit of the available resources.

I’m calling 3 ip-camera’s every 2 seconds, having about 10 switches and showing 15 information blocks for temperature, etc...

I keep my dash as simple as can be, with 2 pages.