Xiaomi Smart Home Suite (very cheap) compatibilty?

[levynger]

@corbin,
new code doesnt deal with ctrl_ln* anymore ? (so it seems..)
i have only ctrl_ln1, so this is the only one i can help with testing .. with the former code, it works pretty well though.

Xiami added Power Consumtiopn (Watt) , however i couldnt find any refernece in message for that, only volttage..

Screenshot_20170718-070535.png (78.59 KiB) Viewed 3399 times

Code: Select all

2017-07-18 06:55:31.685 {"cmd":"heartbeat","model":"ctrl_ln1","sid":"158d00014ab142","short_id":13820,"data":"{\"voltage\":3600,\"channel_0\":\"on\"}"}

[warmaniac]

Hi there . After update of gateway FW I can see in domotocz logs my aqara magnet / door sensor , will be some update of beta domoticz available soon ? I compiled official beta today, but I still can't see it in new devices

Code: Select all

2017-07-18 10:57:51.033 {"cmd":"report","model":"sensor_magnet.aq2","sid":"158d00016c402b","short_id":30460,"data":"{\"status\":\"open\"}"}
2017-07-18 10:57:53.485 XiaomiGateway: unhandled model: sensor_magnet.aq2
2017-07-18 10:57:53.485 {"cmd":"report","model":"sensor_magnet.aq2","sid":"158d00016c402b","short_id":30460,"data":"{\"status\":\"close\"}"}

[chatainsim]

I have some strange logs in Domoticz :

Code: Select all

2017-07-18 17:16:11.336 XiaomiGateway: unknown cmd received: read
2017-07-18 17:16:11.336 {"cmd": "read", "sid": "158d00015e9683"}
2017-07-18 17:16:11.336 XiaomiGateway: unknown cmd received: read
2017-07-18 17:16:11.336 {"cmd": "read", "sid": "158d0001a64ef5"}
2017-07-18 17:16:11.336 XiaomiGateway: unknown cmd received: read
2017-07-18 17:16:11.336 {"cmd": "read", "sid": "158d00012a42ca"}
2017-07-18 17:16:11.336 XiaomiGateway: unknown cmd received: read
2017-07-18 17:16:11.336 {"cmd": "read", "sid": "158d00015a8d79"}
2017-07-18 17:16:11.337 XiaomiGateway: unknown cmd received: read
2017-07-18 17:16:11.337 {"cmd": "read", "sid": "158d000182ec9e"}

Do you know what is it ?

[chatainsim]

I tried but it failed.
I will try again later. Thanks

The learning button is on the side (not the small hole on top)

Yes, I've tried that and on the Mi Home app I have something that let me thing button is added but it failed.

[theo69]

The learning button is on the side (not the small hole on top)
Yes, I've tried that and on the Mi Home app I have something that let me thing button is added but it failed.

Strange, mine is added and working with automation within the Mi Home app

[booster]

I've got a Xiaomi temp + humidity sensor, and was hoping I could use the humidity value in blockly to trigger the ventilator based on its value.

however, the humidity value doesn't seem to be populated...instead I now see a value 3 for some reason.

same happens with another sensor...Is there a way to get the real humidity value in my blockly?

hope the screendumps help to understand the issue

xiaomi_devices.JPG (43.22 KiB) Viewed 3299 times

ok on the dashboard

xiaomi_dashboard.JPG (69.77 KiB) Viewed 3299 times

here it says temp+hum+3... humidity is loaded with value 3 and not 67

xiaomi_values.JPG (25.88 KiB) Viewed 3299 times

[warmaniac]

now I can see logs of Aqara temperature/humidity/pressure sensor !

Code: Select all

2017-07-20 14:10:54.391 XiaomiGateway: unhandled model: weather.v1
2017-07-20 14:10:54.392 {"cmd":"report","model":"weather.v1","sid":"158d00017200ff","short_id":26405,"data":"{\"temperature\":\"2577\"}"}
2017-07-20 14:10:54.403 XiaomiGateway: unhandled model: weather.v1
2017-07-20 14:10:54.403 {"cmd":"report","model":"weather.v1","sid":"158d00017200ff","short_id":26405,"data":"{\"humidity\":\"5625\"}"}
2017-07-20 14:10:54.424 XiaomiGateway: unhandled model: weather.v1
2017-07-20 14:10:54.424 {"cmd":"report","model":"weather.v1","sid":"158d00017200ff","short_id":26405,"data":"{\"pressure\":\"97046\"}"}
2017-07-20 14:10:54.435 XiaomiGateway: unhandled model: weather.v1

I think pressure must be calculated in domoticz by the height above sea level , but it is positive that Xiaomi fix it finally , hope it will be soon implemented in Domoticz

[ben53252642]

After using Xiaomi Gateway successfully with Domoticz for about 2 -3 months, one day recently I found my gateway had stopped working and was flashing yellow. Couldn't see it on the network or broadcasting it's setup wifi SSID after power cycling it, I ended up doing a hard reset, this is where it gets awesome...

I named it the same as it was before during the setup, the app restored all device associations to the Gateway, the only thing I had to do was re-enable "local area network communication protocol", which after doing so my Xiaomi devices attached to the Gateway started working in Domoticz again. Needless to say I am very impressed! Really wish Z-Wave had such easy backup / restore functionality.

[doxikus]

Hi,

Does anybody have info when support for new aqara temp sensor will be merged in official beta!?

Thanks

[theo69]

Hi,

Does anybody have info when support for new aqara temp sensor will be merged in official beta!?

Thanks

Waiting also for the merge for the neutral line Switches

[chatainsim]

Hi,

Does anybody have info when support for new aqara temp sensor will be merged in official beta!?

Thanks

Waiting also for the merge for the neutral line Switches

Merge is here : https://github.com/domoticz/domoticz/co ... e1ab829e55
Update and compile your Domoticz !

Thanks @corbin !

[benbammens]

Hi,

Does anybody have info when support for new aqara temp sensor will be merged in official beta!?

Thanks

Waiting also for the merge for the neutral line Switches

Merge is here : https://github.com/domoticz/domoticz/co ... e1ab829e55
Update and compile your Domoticz !

Thanks @corbin !

I guess, just like me, he has no idea how to do this

I'm also waiting for the beta to implement this...

[theo69]

Waiting also for the merge for the neutral line Switches

Merge is here : https://github.com/domoticz/domoticz/co ... e1ab829e55
Update and compile your Domoticz !

Thanks @corbin !

I guess, just like me, he has no idea how to do this

I'm also waiting for the beta to implement this...

Looks like its in the beta now, updating now (first backup my SD) and will report back...

[benbammens]

Yes, it's working now!

[theo69]

Just to report Aquara Square Button is working now.
However the single Wall Switch with Zero Line still shows:

Code: Select all

2017-07-25 09:36:56.708 XiaomiGateway: unhandled model: ctrl_ln1

[bublikOff]

Any way to handle Aqara Smart Curtains?

[theo69]

Just to report Aquara Square Button is working now.

However it shows "not supported" in HomeKit. With the mi-aqua homebrige plugin its working like a button!

[jjnj]

Any way to handle Aqara Smart Curtains?

+1 for the curtains

Verstuurd vanaf mijn LG-H870 met Tapatalk

[bublikOff]

---deleted---

[Revers59]

please can you test circle wireless switch double click fonction with the last beta ?
I have a double click fonction on my script and all work well before some beta upgrade. Now the when I double click some time I have Simple click and some time I have long click