With this topic YOU can show YOUR Dashticz examples and how-to's
I start with mine ,it is still in development, but this is the nice part. It is developing continuously.
The used tabled is an older Surface RT. I used aluminum U profilesand sawed them in a 45 degree angle.
Then I created a rectangle of them. The power connector is drilled trough the wall so you can't see it
var _LANGUAGE = 'nl_NL'; //or en_US
var _HOST_DOMOTICZ = 'http://192.168.1.71:8080'
var _HOST_ZIGGO_HORIZON = '';
var _APIKEY_WUNDERGROUND = '********';
var _WEATHER_CITY = 'Maassluis';
var _WEATHER_COUNTRY = 'NL';
var _BACKGROUND_IMAGE = 'bg11.jpg';
var _USE_AUTO_POSITIONING = false;
var _USE_FAVORITES = false;
var _HIDE_SECONDS_IN_CLOCK = false;
var _HIDE_MEDIAPLAYER_WHEN_OFF = false;
var _STANDBY_AFTER_MINUTES = 60
var _IDXmoonpicture = 1; //index of the uservariabele MoonPicture
Yes, I did the frame myself.. I took a few hours to get there
1 measure the aluminum U frame 10 times.
2 saw the frames in a 45 degree angle.
3 on the backside I used a very firm cardboard where I glued the frames on.
4 drill a hole in the wall (my wife was not around at than moment ) to get the wire trough.
looking great!
is there a way to scale the graph?
if there is i could show it on my first page, otherwise it will have to go to page 2
1x Raspberry PI 3 With Domoticz V.3.7318
1X RFXtrx433 USB 433.92MHz
1X Synology DS213j Nas
Toon by Eneco including Toon Zon
several KAKU switches and dimmers
Mysensors WIFI Gateway including meters, switches en humidity sensors
Wifi Dimmers (home made)
var _LANGUAGE = 'nl_NL'; //or en_US
var _HOST_DOMOTICZ = 'http://xxx.xxx.x.xxx:xxxx';
var _DOMOTICZ_REFRESH = 3; //seconds
/*
IF YOU HAVE A MEDIABOX FROM ZIGGO (HORIZON), COPY SWITCH_HORIZON.PHP ON A WEBSERVER INSIDE YOUR NETWORK AND CHANGE THE IP.
ENTER THE PATH TO THIS FILE BELOW.
*/
var _HOST_ZIGGO_HORIZON = ''; //e.g. http://192.168.1.3/domoticz/switch_horizon.php';
var _APIKEY_WUNDERGROUND = 'xxxxxxxxxxxxxxxxxx';
var _WEATHER_CITY = 'Helmond';
var _WEATHER_COUNTRY = 'NL';
var _BACKGROUND_IMAGE = 'bg7.jpg';
var _USE_AUTO_POSITIONING = false; //don't want to configure positions, use auto positioning
var _USE_FAVORITES = false; //only used when using auto positioning
var _HIDE_SECONDS_IN_CLOCK = false; //do not show the seconds in the clock
var _HIDE_MEDIAPLAYER_WHEN_OFF = false; //when you have a mediaplayer connected, hide it if nothing is playing
var _NEWS_RSSFEED = ''; //http://www.nu.nl/rss/algemeen
var _USE_FAHRENHEIT = false;
var _STANDBY_AFTER_MINUTES = false; //enter amount of seconds like: 5 (5 seconds)
var _USE_BEAUFORT = true; //Bft instead of m/s
var _TRANSLATE_SPEED = true; //windspeed, north northwest instead of NNW
var _SCROLL_NEWS_AFTER = 7000; //milliseconds, so 7000 is 7 seconds
var _SHOW_LASTUPDATE = false;
var _LASTUPDATE_FORMAT = 'DD-MM-YY HH:mm';
var _SCREENSLIDER_EFFECT = 'slide'; //'slide' or 'fade' or 'cube' or 'coverflow' or 'flip'
var _APIKEY_MAPS = 'xxxxxxxxxxxxxxxxxxxxxx';
var _MAPS_LATITUDE = 51.4615860;
var _MAPS_LONGITUDE = 5.6114900;
var _IDXmoonpicture = 13; //index of the uservariabele MoonPicture
//defining wich blocks to show, de numbers represents the IDX of the device in Domoticz
//only define if you want to use a custom width instead of the default
var blocks = {}
blocks['s6'] = {}
blocks['s6']['width'] = 4; //1 to 12, remove this line if you want to use the default (4)
//defining number of columns, their contents en widths
//width can be a number 1 to 12, but total widths of all columns should always be 12
var columns = {}
columns[1] = {}
columns[1]['blocks'] = ['s9','s6','s1','s2','s5','s3','s4','s10','s7',271,123,44,121] //remark: idx 144 produces 2 blocks, so you can use: '144_1' and '144_2' (or of course, just 144 if you want one)
columns[1]['width'] = 5;
columns[5] = {}
columns[5]['blocks'] = [7,9,42,43,27,28,118] //remark: idx 144 produces 2 blocks, so you can use: '144_1' and '144_2' (or of course, just 144 if you want one)
columns[5]['width'] = 5;
//if you want to use multiple screens, use the code below:
var screens = {}
screens[1] = {}
screens[1]['background'] = 'bg11.jpg';
screens[1]['columns'] = [1,2,3]
var _LANGUAGE = 'nl_NL';
var _WEATHER_CITY = 'Eindhoven';
var _WEATHER_COUNTRY = 'NL';
var _USE_AUTO_POSITIONING = false;
var _USE_FAVORITES = false;
var _HIDE_SECONDS_IN_CLOCK = false;
var _HIDE_MEDIAPLAYER_WHEN_OFF = false;
var _STANDBY_AFTER_MINUTES = 1;
var _USE_BEAUFORT = true;
var _TRANSLATE_SPEED = false;
var _SHOW_LASTUPDATE = true;
var _LASTUPDATE_FORMAT = 'DD-MM-YY HH:mm';
var _IDXmoonpicture = 1; //index of the uservariabele MoonPicture
var _SCREENSLIDER_EFFECT = 'slide';
var _LANGUAGE = 'nl_NL';
var _WEATHER_CITY = 'Eindhoven';
var _WEATHER_COUNTRY = 'NL';
var _USE_AUTO_POSITIONING = false;
var _USE_FAVORITES = false;
var _HIDE_SECONDS_IN_CLOCK = false;
var _HIDE_MEDIAPLAYER_WHEN_OFF = false;
var _STANDBY_AFTER_MINUTES = 1;
var _USE_BEAUFORT = true;
var _TRANSLATE_SPEED = false;
var _SHOW_LASTUPDATE = true;
var _LASTUPDATE_FORMAT = 'DD-MM-YY HH:mm';
var _IDXmoonpicture = 1; //index of the uservariabele MoonPicture
var _SCREENSLIDER_EFFECT = 'slide';
var _LANGUAGE = 'nl_NL'; //or en_US
var _HOST_DOMOTICZ = 'http://xxx.xxx.x.xxx:xxxx';
var _DOMOTICZ_REFRESH = 3; //seconds
/*
IF YOU HAVE A MEDIABOX FROM ZIGGO (HORIZON), COPY SWITCH_HORIZON.PHP ON A WEBSERVER INSIDE YOUR NETWORK AND CHANGE THE IP.
ENTER THE PATH TO THIS FILE BELOW.
*/
var _HOST_ZIGGO_HORIZON = ''; //e.g. http://192.168.1.3/domoticz/switch_horizon.php';
var _APIKEY_WUNDERGROUND = 'xxxxxxxxxxxxxxxxxx';
var _WEATHER_CITY = 'Helmond';
var _WEATHER_COUNTRY = 'NL';
var _BACKGROUND_IMAGE = 'bg7.jpg';
var _USE_AUTO_POSITIONING = false; //don't want to configure positions, use auto positioning
var _USE_FAVORITES = false; //only used when using auto positioning
var _HIDE_SECONDS_IN_CLOCK = false; //do not show the seconds in the clock
var _HIDE_MEDIAPLAYER_WHEN_OFF = false; //when you have a mediaplayer connected, hide it if nothing is playing
var _NEWS_RSSFEED = ''; //http://www.nu.nl/rss/algemeen
var _USE_FAHRENHEIT = false;
var _STANDBY_AFTER_MINUTES = false; //enter amount of seconds like: 5 (5 seconds)
var _USE_BEAUFORT = true; //Bft instead of m/s
var _TRANSLATE_SPEED = true; //windspeed, north northwest instead of NNW
var _SCROLL_NEWS_AFTER = 7000; //milliseconds, so 7000 is 7 seconds
var _SHOW_LASTUPDATE = false;
var _LASTUPDATE_FORMAT = 'DD-MM-YY HH:mm';
var _SCREENSLIDER_EFFECT = 'slide'; //'slide' or 'fade' or 'cube' or 'coverflow' or 'flip'
var _APIKEY_MAPS = 'xxxxxxxxxxxxxxxxxxxxxx';
var _MAPS_LATITUDE = 51.4615860;
var _MAPS_LONGITUDE = 5.6114900;
var _IDXmoonpicture = 13; //index of the uservariabele MoonPicture
//defining wich blocks to show, de numbers represents the IDX of the device in Domoticz
//only define if you want to use a custom width instead of the default
var blocks = {}
blocks['s6'] = {}
blocks['s6']['width'] = 4; //1 to 12, remove this line if you want to use the default (4)
//defining number of columns, their contents en widths
//width can be a number 1 to 12, but total widths of all columns should always be 12
var columns = {}
columns[1] = {}
columns[1]['blocks'] = ['s9','s6','s1','s2','s5','s3','s4','s10','s7',271,123,44,121] //remark: idx 144 produces 2 blocks, so you can use: '144_1' and '144_2' (or of course, just 144 if you want one)
columns[1]['width'] = 5;
columns[5] = {}
columns[5]['blocks'] = [7,9,42,43,27,28,118] //remark: idx 144 produces 2 blocks, so you can use: '144_1' and '144_2' (or of course, just 144 if you want one)
columns[5]['width'] = 5;
//if you want to use multiple screens, use the code below:
var screens = {}
screens[1] = {}
screens[1]['background'] = 'bg11.jpg';
screens[1]['columns'] = [1,2,3]
var _LANGUAGE = 'nl_NL'; //or en_US
var _HOST_DOMOTICZ = 'http://xxx.xxx.x.xxx:xxxx';
var _DOMOTICZ_REFRESH = 3; //seconds
/*
IF YOU HAVE A MEDIABOX FROM ZIGGO (HORIZON), COPY SWITCH_HORIZON.PHP ON A WEBSERVER INSIDE YOUR NETWORK AND CHANGE THE IP.
ENTER THE PATH TO THIS FILE BELOW.
*/
var _HOST_ZIGGO_HORIZON = ''; //e.g. http://192.168.1.3/domoticz/switch_horizon.php';
var _APIKEY_WUNDERGROUND = 'xxxxxxxxxxxxxxxxxx';
var _WEATHER_CITY = 'Helmond';
var _WEATHER_COUNTRY = 'NL';
var _BACKGROUND_IMAGE = 'bg7.jpg';
var _USE_AUTO_POSITIONING = false; //don't want to configure positions, use auto positioning
var _USE_FAVORITES = false; //only used when using auto positioning
var _HIDE_SECONDS_IN_CLOCK = false; //do not show the seconds in the clock
var _HIDE_MEDIAPLAYER_WHEN_OFF = false; //when you have a mediaplayer connected, hide it if nothing is playing
var _NEWS_RSSFEED = ''; //http://www.nu.nl/rss/algemeen
var _USE_FAHRENHEIT = false;
var _STANDBY_AFTER_MINUTES = false; //enter amount of seconds like: 5 (5 seconds)
var _USE_BEAUFORT = true; //Bft instead of m/s
var _TRANSLATE_SPEED = true; //windspeed, north northwest instead of NNW
var _SCROLL_NEWS_AFTER = 7000; //milliseconds, so 7000 is 7 seconds
var _SHOW_LASTUPDATE = false;
var _LASTUPDATE_FORMAT = 'DD-MM-YY HH:mm';
var _SCREENSLIDER_EFFECT = 'slide'; //'slide' or 'fade' or 'cube' or 'coverflow' or 'flip'
var _APIKEY_MAPS = 'xxxxxxxxxxxxxxxxxxxxxx';
var _MAPS_LATITUDE = 51.4615860;
var _MAPS_LONGITUDE = 5.6114900;
var _IDXmoonpicture = 13; //index of the uservariabele MoonPicture
//defining wich blocks to show, de numbers represents the IDX of the device in Domoticz
//only define if you want to use a custom width instead of the default
var blocks = {}
blocks['s6'] = {}
blocks['s6']['width'] = 4; //1 to 12, remove this line if you want to use the default (4)
//defining number of columns, their contents en widths
//width can be a number 1 to 12, but total widths of all columns should always be 12
var columns = {}
columns[1] = {}
columns[1]['blocks'] = ['s9','s6','s1','s2','s5','s3','s4','s10','s7',271,123,44,121] //remark: idx 144 produces 2 blocks, so you can use: '144_1' and '144_2' (or of course, just 144 if you want one)
columns[1]['width'] = 5;
columns[5] = {}
columns[5]['blocks'] = [7,9,42,43,27,28,118] //remark: idx 144 produces 2 blocks, so you can use: '144_1' and '144_2' (or of course, just 144 if you want one)
columns[5]['width'] = 5;
//if you want to use multiple screens, use the code below:
var screens = {}
screens[1] = {}
screens[1]['background'] = 'bg11.jpg';
screens[1]['columns'] = [1,2,3]
week = tonumber (os.date( "%V"))
dag = tostring(os.date("%a"));
status = tonumber(otherdevices_svalues['Afval'])
print('script bin_selector executed')
commandArray = {}
print ('Dag= '..dag)
if (dag=='Sat' or dag=='Sun' ) then
weekend = true; weekdag = false
end
if (dag=='Mon' or dag=='Tue' or dag=='Wed' or dag=='Thu' or dag=='Fri') then
weekend = false ; weekdag = true
end
--Bepalen morgen papier
if(week==2 and dag=='Wed' or week==4 and dag=='Wed' or week==6 and dag=='Wed' or week==8 and dag=='Wed' or week==10 and dag=='Wed' or week==12 and dag=='Wed' or week==14 and dag=='Wed' or week==16 and dag=='Wed' or week==18 and dag=='Wed' or week==20 and dag=='Wed' or week==22 and dag=='Wed' or week==24 and dag=='Wed' or week==26 and dag=='Wed' or week==28 and dag=='Wed'
or week==30 and dag=='Wed' or week==32 and dag=='Wed' or week==34 and dag=='Wed' or week==36 and dag=='Wed' or week==38 and dag=='Wed' or week==40 and dag=='Wed' or week==42 and dag=='Wed' or week==44 and dag=='Wed' or week==46 and dag=='Wed' or week==48 and dag=='Wed' or week==50 and dag=='Wed' or week==52 and dag=='Wed') then
morgenpapier = true; papier = false; morgenplastic = false; plastic = false; niets = false
print ('morgen papier')
end
--Bepalen papier
if(week==2 and dag=='Thu' or week==4 and dag=='Thu' or week==6 and dag=='Thu' or week==8 and dag=='Thu' or week==10 and dag=='Thu' or week==12 and dag=='Thu' or week==14 and dag=='Thu' or week==16 and dag=='Thu' or week==18 and dag=='Thu' or week==20 and dag=='Thu' or week==22 and dag=='Thu' or week==24 and dag=='Thu' or week==26 and dag=='Thu' or week==28 and dag=='Thu'
or week==30 and dag=='Thu' or week==32 and dag=='Thu' or week==34 and dag=='Thu' or week==36 and dag=='Thu' or week==38 and dag=='Thu' or week==40 and dag=='Thu' or week==42 and dag=='Thu' or week==44 and dag=='Thu' or week==46 and dag=='Thu' or week==48 and dag=='Thu' or week==50 and dag=='Thu' or week==52 and dag=='Thu') then
morgenpapier = false; papier = true; morgenplastic = false; plastic = false; niets = false
print ('vandaag papier')
end
--Bepalen morgen plastic
if(week==2 and dag=='Thu' or week==4 and dag=='Thu' or week==6 and dag=='Thu' or week==8 and dag=='Thu' or week==10 and dag=='Thu' or week==12 and dag=='Thu' or week==14 and dag=='Thu' or week==16 and dag=='Thu' or week==18 and dag=='Thu' or week==20 and dag=='Thu' or week==22 and dag=='Thu' or week==24 and dag=='Thu' or week==26 and dag=='Thu' or week==28 and dag=='Thu'
or week==30 and dag=='Thu' or week==32 and dag=='Thu' or week==34 and dag=='Thu' or week==36 and dag=='Thu' or week==38 and dag=='Thu' or week==40 and dag=='Thu' or week==42 and dag=='Thu' or week==44 and dag=='Thu' or week==46 and dag=='Thu' or week==48 and dag=='Thu' or week==50 and dag=='Thu' or week==52 and dag=='Thu') then
morgenpapier = false; papier = false; morgenplastic = true; plastic = false; niets = false
print ('morgen plastic')
end
--Bepalen plastic
if(week==2 and dag=='Fri' or week==4 and dag=='Fri' or week==6 and dag=='Fri' or week==8 and dag=='Fri' or week==10 and dag=='Fri' or week==12 and dag=='Fri' or week==14 and dag=='Fri' or week==16 and dag=='Fri' or week==18 and dag=='Fri' or week==20 and dag=='Fri' or week==22 and dag=='Fri' or week==24 and dag=='Fri' or week==26 and dag=='Fri' or week==28 and dag=='Fri'
or week==30 and dag=='Fri' or week==32 and dag=='Fri' or week==34 and dag=='Fri' or week==36 and dag=='Fri' or week==38 and dag=='Fri' or week==40 and dag=='Fri' or week==42 and dag=='Fri' or week==44 and dag=='Fri' or week==46 and dag=='Fri' or week==48 and dag=='Fri' or week==50 and dag=='Fri' or week==52 and dag=='Fri') then
morgenpapier = false; papier = false; morgenplastic = false; plastic = true; niets = false
print ('vandaag plastic')
end
--Bepalen geen plastic en geen papier
if(week==1 or week==3 or week==5 or week==7 or week==9 or week==11 or week==13 or week==15 or week==17 or week==19 or week==21 or week==23 or week==25 or week==27 or week==29 or week==31 or week==33 or week==35
or week==37 or week==39 or week==41 or week==43 or week==45 or week==47 or week==49 or week==51 ) then
morgenpapier = false; papier = false; morgenplastic = false; plastic = false; niets = true
print ('vandaag geen afval buiten zetten')
end
if (niets and weekdag and status~=10) then
print ('not papier not plastic - status 10')
status=10
commandArray ['UpdateDevice']= '315|1|' .. status
end
if (morgenpapier and weekdag and dag and status~=20) then
print ('morgen papier and weekdag - status 20')
status=20
commandArray ['UpdateDevice']= '315|1|' .. status
end
if (papier and weekdag and dag and status~=30) then
print ('papier and weekdag - status 30')
status=30
commandArray ['UpdateDevice']= '315|1|' .. status
end
if (morgenplastic and weekdag and dag and status~=40) then
print ('morgen plastic and weekdag - status 40')
status=40
commandArray ['UpdateDevice']= '315|1|' .. status
end
if (plastic and weekdag and dag and status~=50) then
print ('plastic and weekdag - status 50')
status=50
commandArray ['UpdateDevice']= '315|1|' .. status
end
return commandArray
var _LANGUAGE = 'nl_NL';
var _HOST_DOMOTICZ = 'http://192.168.x.x:8080';
var _DOMOTICZ_REFRESH = 5; //in seconds
var _HOST_ZIGGO_HORIZON = 'http://192.168.x.x/dasboard/switch_horizon.php';
var _APIKEY_WUNDERGROUND = 'xxx';
var _WEATHER_CITY = 'Sneek';
var _WEATHER_CITYNAME = ''; //show a different city name, leave empty if same as _WEATHER_CITY
var _WEATHER_COUNTRY = 'NL';
var _USE_AUTO_POSITIONING = false; //don't want to configure positions, use auto positioning
var _USE_FAVORITES = false; //only used when using auto positioning
var _HIDE_SECONDS_IN_CLOCK = true; //do not show the seconds in the clock
var _HIDE_MEDIAPLAYER_WHEN_OFF = false; //when you have a mediaplayer connected, hide it if nothing is playing
var _NEWS_RSSFEED = 'https://crossorigin.me/http://feeds.fee ... ers/nieuws';
var _USE_FAHRENHEIT = false;
var _USE_BEAUFORT = true; //Bft instead of m/s
var _TRANSLATE_SPEED = false; //windspeed, north northwest instead of NNW
var _STANDBY_AFTER_MINUTES = 5;
var _SCROLL_NEWS_AFTER = 7000; //milliseconds, so 7000 is 7 seconds
var _SHOW_LASTUPDATE = false;
var _LASTUPDATE_FORMAT = 'DD-MM-YY HH:mm';
var _SCREENSLIDER_EFFECT = 'slide'; //'slide' or 'fade' or 'cube' or 'coverflow' or 'flip'
var _APIKEY_MAPS = 'xxx';
var _MAPS_LATITUDE = xxx;
var _MAPS_LONGITUDE = xxx;
var _MAPS_ZOOMLEVEL = 8;
