framb0ise v2 - awesome new dashboard!

[tontze]

Blinds still dotn have control over it, i have "blinds inverted" control

That's correct. This project is 2 days live.

If you want to add it yourself, be my guest, otherwise add a request to the 'issues' page? Like suggested in the first post? That way we can keep track of all the work we still have to do, Rome wasn't built in 1 day

Yes im sry, i got impression that it was allready added after jvdz presented code for it

[safi78]

Yes im sry, i got impression that it was allready added after jvdz presented code for it

No prob. But we don't both don't have blinds inverted. Could you send a json file of that device? Then we can implement it for you?

[safi78]

No more config.js

Screen Shot 2017-04-25 at 16.26.19.png (247.15 KiB) Viewed 2701 times

[qwerk]

nicely done, where does framboise store the password?

and the thicks?

[tontze]

Yes im sry, i got impression that it was allready added after jvdz presented code for it

No prob. But we don't both don't have blinds inverted. Could you send a json file of that device? Then we can implement it for you?

Code: Select all

{
   "ActTime" : 1493135755,
   "ServerTime" : "2017-04-25 18:55:55",
   "Sunrise" : "05:31",
   "Sunset" : "21:13",
   "result" : [
      {
         "AddjMulti" : 1.0,
         "AddjMulti2" : 1.0,
         "AddjValue" : 0.0,
         "AddjValue2" : 0.0,
         "BatteryLevel" : 255,
         "CustomImage" : 0,
         "Data" : "Open",
         "Description" : "",
         "Favorite" : 1,
         "HardwareID" : 6,
         "HardwareName" : "RFLink",
         "HardwareType" : "RFLink Gateway USB",
         "HardwareTypeVal" : 46,
         "HaveDimmer" : false,
         "HaveGroupCmd" : false,
         "HaveTimeout" : false,
         "ID" : "00D04282",
         "Image" : "Light",
         "IsSubDevice" : false,
         "LastUpdate" : "2017-04-25 08:00:02",
         "Level" : 99,
         "LevelInt" : 99,
         "MaxDimLevel" : 100,
         "Name" : "Blinds",
         "Notifications" : "false",
         "PlanID" : "4",
         "PlanIDs" : [ 4 ],
         "Protected" : false,
         "ShowNotifications" : true,
         "SignalLevel" : "-",
         "Status" : "Open",
         "StrParam1" : "",
         "StrParam2" : "",
         "SubType" : "BrelMotor",
         "SwitchType" : "Blinds Inverted",
         "SwitchTypeVal" : 6,
         "Timers" : "true",
         "Type" : "Light/Switch",
         "TypeImg" : "blinds",
         "Unit" : 193,
         "Used" : 1,
         "UsedByCamera" : false,
         "XOffset" : "966",
         "YOffset" : "219",
         "idx" : "162"
      }
   ],
   "status" : "OK",
   "title" : "Devices"
}

Do you mean this json ?

-T

[jvdz]

Hi
Just started yesterday with that awesome dashboard. No problem at all, but.. if I connect to http://myddns:port/framb0ise when I'm under wifi it's ok, if I go out I can connect to the page but nothing is listed.. It seems that I don't have any roomplans.. If I connect to domoticz main page with the same ddns everythings works fine.

Did you also put that host ( http://myddns:port) in config.js?

Jos

[jvdz]

@tontze ,
Am I correct to assume that this blind doesn't have an percentage option, but merely UP/DOWN ( and possibly STOP)?

Jos

[marcotrumpet]

Hi
Just started yesterday with that awesome dashboard. No problem at all, but.. if I connect to http://myddns:port/framb0ise when I'm under wifi it's ok, if I go out I can connect to the page but nothing is listed.. It seems that I don't have any roomplans.. If I connect to domoticz main page with the same ddns everythings works fine.

Did you also put that host ( http://myddns:port) in config.js?

Jos

Yes I did. But the domoticz local port and the external one I use eith ddns are different. If I set in config "http://ddns:domoticzinternalport" or "http://ddns:domoticzexternalport" nothing appen

Inviato dal mio SM-G950F utilizzando Tapatalk
EDIT

My bad.. using "http://ddns:externalport" work! thanks mate

[Maikie]

For my information, updating just by cloning from git again with this command?

Code: Select all

git clone https://github.com/safi78/framb0ise

[qwerk]

my smoke detectors are red again, without smoke or fire

[jvdz]

Hi
Yes I did. But the domoticz local port and the external one I use eith ddns are different. If I set in config "http://ddns:domoticzinternalport" or "http://ddns:domoticzexternalport" nothing appen

EDIT
My bad.. using "http://ddns:externalport" work! thanks mate

Sounds great, but you do realize that this setup is using one single static setup at this moment, so it can either be the internal or external port.
Maybe we should simply use the original URL's ip:port.
Jos

[safi78]

For my information, updating just by cloning from git again with this command?

Code: Select all

git clone https://github.com/safi78/framb0ise

yes. with the new settings window your settings will be stored for future updates.

[safi78]

my smoke detectors are red again, without smoke or fire

Something went wrong with our first Pull Request, some code got reverted to older state. I just fixed this for you (again)

[safi78]

nicely done, where does framboise store the password?

and the thicks?

All stuff is stored in 'local storage'. very safe and secure, only YOUR browser can access this, nothing is accessible for others or send over.

It's like a very permanent cookie

[CaesarPL]

Good evening, first of all - great job, thank you very much!

Excuse me for silly question, but how can I configure Traffic and Weather? Does it work only for Netherlands?

EDIT:
Ahhhh, DarkSky is missing. But what about Traffic?

[safi78]

Good evening, first of all - great job, thank you very much!

Excuse me for silly question, but how can I configure Traffic and Weather? Does it work only for Netherlands?

Thanks

And, if you can provide us with a good api for a source for Traffic and Weather in $yourcountry i'd gladly take a look?

[safi78]

Good evening, first of all - great job, thank you very much!

Excuse me for silly question, but how can I configure Traffic and Weather? Does it work only for Netherlands?

EDIT:
Ahhhh, DarkSky is missing. But what about Traffic?

What do you mean with your EDIT?

[CaesarPL]

Good evening, first of all - great job, thank you very much!

Excuse me for silly question, but how can I configure Traffic and Weather? Does it work only for Netherlands?

EDIT:
Ahhhh, DarkSky is missing. But what about Traffic?

What do you mean with your EDIT?

Silly again and tired a bit. I thought that I don't have Weather as I haven't configured DarkSky, yet. Now I understand that Weather and Traffic works only in Netherlands. Duh, I always wanted to move to Netherlands from Poland...

[safi78]

Good evening, first of all - great job, thank you very much!

Excuse me for silly question, but how can I configure Traffic and Weather? Does it work only for Netherlands?

EDIT:
Ahhhh, DarkSky is missing. But what about Traffic?

What do you mean with your EDIT?

Silly again and tired a bit. I thought that I don't have Weather as I haven't configured DarkSky, yet. Now I understand that Weather and Traffic works only in Netherlands. Duh, I always wanted to move to Netherlands from Poland...

dobry wieczór

yeah I should doublecheck on the darksystuff an generate a warning ..

So, if you have a polish api, i can see what i can do? I'll need some help translating though, but a very close friend of mine is half Polish, that shouldn't be a problem

[CaesarPL]

dobry wieczór

+1 ! Even letters are fine!

yeah I should doublecheck on the darksystuff an generate a warning ..

So, if you have a polish api, i can see what i can do? I'll need some help translating though, but a very close friend of mine is half Polish, that shouldn't be a problem

Unfortunately, I don't know any API that could work...