Terrarium control

In this subforum you can show projects you have made, or you are busy with. Please create your own topic.

Moderator: leecollings

Post Reply
Lebo2d9
Posts: 139
Joined: Tuesday 06 September 2016 20:39
Target OS: Raspberry Pi / ODroid
Domoticz version: L stab
Location: Belgium
Contact:
Contact Lebo2d9

Terrarium control

Post by Lebo2d9 »

Hi,

Today i finished my high voltage control for my terrarium. It contains an RPI 3 , an 8channel relay card and a ULN2803 to invert the outputs of the RPI because the relay relay card is active high.

Image

On the picture the GPIO link cable is not installed. All GPIO ports are availible on the interface board. Later i can add I2C and 1W devices to the interface board.

Now i can start creeating my blocky scripts.

Kind regards
Domoicz on RPI3 (wifi) directly connected 3x ds18b20 for CV temp, Evohome (9 zone), 1 remote 220V switch based on ESP-12. RFXtrx433E, 16x AMST-606, 5 Somfy RTS motors
Domoticz on RPI3(wifi) as slave for terraruim control
More to come
Top
Derik
Posts: 1605
Joined: Friday 18 October 2013 23:33
Target OS: Raspberry Pi / ODroid
Domoticz version: BETA
Location: Arnhem/Nijmegen Nederland
Contact:
Contact Derik

Re: Terrarium control

Post by Derik »

mmm have a terrarium to...
You could build this with a esp relais board....
A string of Dallas is useful...
You can control then temp and hum to...


Bearded dragon?
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups
Top
Lebo2d9
Posts: 139
Joined: Tuesday 06 September 2016 20:39
Target OS: Raspberry Pi / ODroid
Domoticz version: L stab
Location: Belgium
Contact:
Contact Lebo2d9

Re: Terrarium control

Post by Lebo2d9 »

1 leopard gecko I had 3 but they went ill and only one survived
Image
Image
2 viper geckos
Image
Domoicz on RPI3 (wifi) directly connected 3x ds18b20 for CV temp, Evohome (9 zone), 1 remote 220V switch based on ESP-12. RFXtrx433E, 16x AMST-606, 5 Somfy RTS motors
Domoticz on RPI3(wifi) as slave for terraruim control
More to come
Top
Derik
Posts: 1605
Joined: Friday 18 October 2013 23:33
Target OS: Raspberry Pi / ODroid
Domoticz version: BETA
Location: Arnhem/Nijmegen Nederland
Contact:
Contact Derik

Re: Terrarium control

Post by Derik »

mmm what are the black things you use in the first picture
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups
Top
Lebo2d9
Posts: 139
Joined: Tuesday 06 September 2016 20:39
Target OS: Raspberry Pi / ODroid
Domoticz version: L stab
Location: Belgium
Contact:
Contact Lebo2d9

Re: Terrarium control

Post by Lebo2d9 »

Derik wrote:mmm what are the black things you use in the first picture

It is the back side of 3 "legrand 077112" 220V outlet socket mounted in a tripple frame .

I have 3 of this frames. 8 outlets controlled with domoticz and 1 constant 220V.
Domoicz on RPI3 (wifi) directly connected 3x ds18b20 for CV temp, Evohome (9 zone), 1 remote 220V switch based on ESP-12. RFXtrx433E, 16x AMST-606, 5 Somfy RTS motors
Domoticz on RPI3(wifi) as slave for terraruim control
More to come
Top
Derik
Posts: 1605
Joined: Friday 18 October 2013 23:33
Target OS: Raspberry Pi / ODroid
Domoticz version: BETA
Location: Arnhem/Nijmegen Nederland
Contact:
Contact Derik

Re: Terrarium control

Post by Derik »

ok... when i found them i will upload some of my pictures...
I did setup my heating and light wit Zwave devices....
And a few esp for the tempsensors..
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups
Top
Post Reply

Return to “Show your projects”