Dashticz - General Discussions

[robgeerts]

Cool!
If something still doesnt work, make sure you've the latest version!

[koowee]

It seems that there is a small problem with windspeed using netatmo? I think that it should be m/s, not km/u or h

windspeed.png (17.45 KiB) Viewed 3166 times

windspeed_2.png (41.52 KiB) Viewed 3166 times

Code: Select all

      {
         "AddjMulti" : 1.0,
         "AddjMulti2" : 1.0,
         "AddjValue" : 0.0,
         "AddjValue2" : 0.0,
         "BatteryLevel" : 255,
         "Chill" : 0.0,
         "CustomImage" : 0,
         "Data" : "323.00;NW;14;31;0.0;0.0",
         "Description" : "",
         "Direction" : 323.0,
         "DirectionStr" : "NW",
         "Favorite" : 0,
         "Gust" : "3.1",
         "HardwareID" : 13,
         "HardwareName" : "Netatmo",
         "HardwareType" : "Netatmo",
         "HardwareTypeVal" : 54,
         "HaveTimeout" : false,
         "ID" : "1443",
         "LastUpdate" : "2017-04-07 20:23:06",
         "Name" : "Wind Gauge",
         "Notifications" : "false",
         "PlanID" : "0",
         "PlanIDs" : [ 0 ],
         "Protected" : false,
         "ShowNotifications" : true,
         "SignalLevel" : "-",
         "Speed" : "1.4",
         "SubType" : "Weather Station",
         "Timers" : "false",
         "Type" : "Wind",
         "TypeImg" : "wind",
         "Unit" : 0,
         "Used" : 1,
         "XOffset" : "0",
         "YOffset" : "0",
         "idx" : "188"
      },

[robgeerts]

It seems that there is a small problem with windspeed using netatmo? I think that it should be m/s, not km/u or h
windspeed.png

Fixed in latest version, the icon now also rotates to the right direction!

[EdwinK]

Now the layout of the Mediaplayers seem to be a little off

[robgeerts]

Now the layout of the Mediaplayers seem to be a little off

Could you check the version just released to gitlab?

[EdwinK]

Now the layout of the Mediaplayers seem to be a little off

Could you check the version just released to gitlab?

Thanks. that fixed it.

[heggink]

Hey Rob,
Just tried your latest release. I can't get the alignment to work for my ipad2. Any suggestions?
Thanks!
H

he.jpg (106.3 KiB) Viewed 3122 times

[robgeerts]

Hey Rob,
Just tried your latest release. I can't get the alignment to work for my ipad2. Any suggestions?
Thanks!
Hhe.jpg

Could you try latest version?



By the way, someone interested in using charts?

[pvm]

Wow, really nice progress
Guess I have to do some sponsoring for your tablet too (will be done in a couple of minutes)

Result so far (in my temporary home, most of my devices are not installed)

Dash.jpg (175.24 KiB) Viewed 3107 times

I do have some issues:
-The dashboard does not function completely in IE 11 (no issue for me, possibly for others)

dashIE.jpg (184.78 KiB) Viewed 3107 times

-I am using 2 dummy hardware types, which do not display correct:

1: Dummy hardware displaying moisture of soil in percentage (0-100%)

Code: Select all

{
         "AddjMulti" : 1.0,
         "AddjMulti2" : 1.0,
         "AddjValue" : 0.0,
         "AddjValue2" : 0.0,
         "BatteryLevel" : 100,
         "CustomImage" : 11,
         "Data" : "33 %",
         "Description" : "",
         "Favorite" : 1,
         "HardwareID" : 2,
         "HardwareName" : "FlowerCare",
         "HardwareType" : "Dummy (Does nothing, use for virtual switches only)",
         "HardwareTypeVal" : 15,
         "HaveTimeout" : true,
         "ID" : "00082018",
         "Image" : "Water",
         "LastUpdate" : "2017-03-30 19:15:42",
         "Name" : "MijnPlantjeVocht",
         "Notifications" : "true",
         "PlanID" : "0",
         "PlanIDs" : [ 0 ],
         "Protected" : false,
         "SensorType" : 1,
         "SensorUnit" : "%",
         "ShowNotifications" : true,
         "SignalLevel" : "-",
         "SubType" : "Custom Sensor",
         "Timers" : "false",
         "Type" : "General",
         "TypeImg" : "Water",
         "Unit" : 1,
         "Used" : 1,
         "XOffset" : "0",
         "YOffset" : "0",
         "idx" : "18"
      },
 

2 Dummy hardware displaying foodvalue in soil in uS/cm

Code: Select all

 {
         "AddjMulti" : 1.0,
         "AddjMulti2" : 1.0,
         "AddjValue" : 0.0,
         "AddjValue2" : 0.0,
         "BatteryLevel" : 100,
         "CustomImage" : 15,
         "Data" : "310 uS/cm",
         "Description" : "Voedingsstoffen >500?",
         "Favorite" : 1,
         "HardwareID" : 2,
         "HardwareName" : "FlowerCare",
         "HardwareType" : "Dummy (Does nothing, use for virtual switches only)",
         "HardwareTypeVal" : 15,
         "HaveTimeout" : true,
         "ID" : "00082025",
         "Image" : "Heating",
         "LastUpdate" : "2017-03-30 19:15:42",
         "Name" : "MijnPlantjeVoeding",
         "Notifications" : "false",
         "PlanID" : "0",
         "PlanIDs" : [ 0 ],
         "Protected" : false,
         "SensorType" : 1,
         "SensorUnit" : "uS/cm",
         "ShowNotifications" : true,
         "SignalLevel" : "-",
         "SubType" : "Custom Sensor",
         "Timers" : "false",
         "Type" : "General",
         "TypeImg" : "Heating",
         "Unit" : 1,
         "Used" : 1,
         "XOffset" : "0",
         "YOffset" : "0",
         "idx" : "25"
      },
 

Do you see an option to display the correct values and add icons? Can I do this myself?

edit: sorry we were posting at the same time... I'll upgrade to the latest version and report back on the IPad layou
edit: Ah and yes interested in using charts. It is hard to keep up with all changes, big compliment to you!

[robgeerts]

Wow, really nice progress
Guess I have to do some sponsoring for your tablet too (will be done in a couple of minutes)

Thanks!

-The dashboard does not function completely in IE 11 (no issue for me, possibly for others)
dashIE.jpg

Since it will be mostly used on tablets, this wont be an issue, but will fix as much as possible

-I am using 2 dummy hardware types, which do not display correct:

1: Dummy hardware displaying moisture of soil in percentage (0-100%)
2 Dummy hardware displaying foodvalue in soil in uS/cm

Fixed in latest version!
Wich icon do you prefer with the foodvalue?
In domoticz you use a heating icon?

I've tested the layout for the IPad in chrome by selecting the ipad as device. I have similar layout issues as mentioned by heggink:

I know, try to fix as much as possible!

Ah and yes interested in using charts. It is hard to keep up with all changes, big compliment to you!

Thanks!!

[pvm]

-I am using 2 dummy hardware types, which do not display correct:

1: Dummy hardware displaying moisture of soil in percentage (0-100%)
2 Dummy hardware displaying foodvalue in soil in uS/cm

Fixed in latest version!
Wich icon do you prefer with the foodvalue?
In domoticz you use a heating icon?

I would like the cutlery icon
Thanks again for the quick fixes, downloading latest version now

[robgeerts]

Download it again
Just added the cutlery icon

Good night!

[heggink]

Hey Rob,

ipad looks muuch better! Thx.

Couple of items:
1) all of my percentage (memory, CPU, sensors) show as on/off. See json output below.
2) Same for 'distance' devices
3) barometer and humidity show 2 decimals (see eralier picture) and barometer uses % instead of hPa (below as well)

Many thanks again. Couple of beers coming up.

H

{
"AddjMulti" : 1.0,
"AddjMulti2" : 1.0,
"AddjValue" : 0.0,
"AddjValue2" : 0.0,
"Barometer" : 1026,
"BatteryLevel" : 255,
"CustomImage" : 0,
"Data" : "9.5 C, 83 %, 1026 hPa",
"Description" : "",
"DewPoint" : "6.76",
"Favorite" : 1,
"Forecast" : 3,
"ForecastStr" : "Cloudy",
"HardwareID" : 9,
"HardwareName" : "Weather Lelystad",
"HardwareType" : "Weather Underground",
"HardwareTypeVal" : 14,
"HaveTimeout" : false,
"Humidity" : 83,
"HumidityStatus" : "Wet",
"ID" : "0001",
"LastUpdate" : "2017-04-07 23:34:56",
"Name" : "Lelystad Barometer",
"Notifications" : "false",
"PlanID" : "0",
"PlanIDs" : [ 0 ],
"Protected" : false,
"ShowNotifications" : true,
"SignalLevel" : "-",
"SubType" : "THB1 - BTHR918, BTHGN129",
"Temp" : 9.5,
"Timers" : "false",
"Type" : "Temp + Humidity + Baro",
"TypeImg" : "temperature",
"Unit" : 1,
"Used" : 1,
"XOffset" : "0",
"YOffset" : "0",
"forecast_url" : "aHR0cDovL3d3dy53dW5kZXJncm91bmQuY29tL2NnaS1iaW4vZmluZHdlYXRoZXIvZ2V0Rm9yZWNhc3Q/cXVlcnk9cHdzJTNBSUZMRVZPTEExNw==",
"idx" : "37"
},
{
"AddjMulti" : 1.0,
"AddjMulti2" : 1.0,
"AddjValue" : 0.0,
"AddjValue2" : 0.0,
"BatteryLevel" : 255,
"CustomImage" : 0,
"Data" : "4.30%",
"Description" : "",
"Favorite" : 0,
"HardwareID" : 50,
"HardwareName" : "Sensors",
"HardwareType" : "Dummy (Does nothing, use for virtual switches only)",
"HardwareTypeVal" : 15,
"HaveTimeout" : false,
"ID" : "00082548",
"Image" : "Computer",
"LastUpdate" : "2017-04-07 23:40:02",
"Name" : "Domoticz memory",
"Notifications" : "true",
"PlanID" : "0",
"PlanIDs" : [ 0 ],
"Protected" : false,
"ShowNotifications" : true,
"SignalLevel" : "-",
"SubType" : "Percentage",
"Timers" : "false",
"Type" : "General",
"TypeImg" : "hardware",
"Unit" : 1,
"Used" : 1,
"XOffset" : "0",
"YOffset" : "0",
"idx" : "548"
},
{
"AddjMulti" : 1.0,
"AddjMulti2" : 1.0,
"AddjValue" : 0.0,
"AddjValue2" : 0.0,
"BatteryLevel" : 255,
"CustomImage" : 0,
"Data" : "3.36%",
"Description" : "",
"Favorite" : 0,
"HardwareID" : 50,
"HardwareName" : "Sensors",
"HardwareType" : "Dummy (Does nothing, use for virtual switches only)",
"HardwareTypeVal" : 15,
"HaveTimeout" : false,
"ID" : "00082553",
"Image" : "Computer",
"LastUpdate" : "2017-04-07 23:40:01",
"Name" : "Domoticz CPU",
"Notifications" : "false",
"PlanID" : "0",
"PlanIDs" : [ 0 ],
"Protected" : false,
"ShowNotifications" : true,
"SignalLevel" : "-",
"SubType" : "Percentage",
"Timers" : "false",
"Type" : "General",
"TypeImg" : "hardware",
"Unit" : 1,
"Used" : 1,
"XOffset" : "0",
"YOffset" : "0",
"idx" : "553"
},

{
"AddjMulti" : 1.0,
"AddjMulti2" : 1.0,
"AddjValue" : 0.0,
"AddjValue2" : 0.0,
"BatteryLevel" : 255,
"CustomImage" : 0,
"Data" : "16.5 cm",
"Description" : "",
"Favorite" : 0,
"HardwareID" : 44,
"HardwareName" : "Distance",
"HardwareType" : "Dummy (Does nothing, use for virtual switches only)",
"HardwareTypeVal" : 15,
"HaveTimeout" : false,
"ID" : "00082514",
"LastUpdate" : "2017-04-07 23:16:25",
"Name" : "Rosa Distance",
"Notifications" : "false",
"PlanID" : "0",
"PlanIDs" : [ 0 ],
"Protected" : false,
"ShowNotifications" : true,
"SignalLevel" : "-",
"SubType" : "Distance",
"SwitchTypeVal" : 0,
"Timers" : "false",
"Type" : "General",
"TypeImg" : "visibility",
"Unit" : 1,
"Used" : 1,
"XOffset" : "0",
"YOffset" : "0",
"idx" : "514"
},

[heggink]

forgot: on gitlab it says that things get removed on update. Are you sure? I used another main page already which is located in www as well and that just stays there. In your case, you use index.html as well which is domoticz' default so that DOES get overwritten with teh standard domoticz index.html (reason why I rename it myself before moving into www).

[robgeerts]

Thnx for the beers! Will check tomorrow about your devices! About updating.... Its better to move my dashboard in a subfolder I guess?

[pvm]

Thnx, layout issues for iPad are fixed (i'm just using too long names now... i should be able to shorten them)

[mAiden88]

Maybe someone can help me..

Change CONFIG.js to right IP and place to Domoticz on my PI.
It don't starts this nice dashboard.. Even when i try to IP:PORT/index.html it starts Domoticz Dashboard.. (ofc i upload in www folder from Domoticz )
If a starts index on the map, i get this >>> http://prntscr.com/etvhz4
What do i wrong?

[robgeerts]

Install it in a subfolder in the www directory and call it by: IP:PORT/subfolder/index.html

[mAiden88]

Install it in a subfolder in the www directory and call it by: IP:PORT/subfolder/index.html

You kidding me? It is just so easy? I am ashamed as an application developer.
Thanks its working now.. Lets see what i can make now..

[Dingetje2004]

Gr8 Work ROB! What are the possibilities to add webcam support. I do have an image in your dashboard from my front door cam, but does not refreshes. I created a new button in CONFIG. I would alsolike to have it refreshed without refreshing the whole page every seconded. I was thinking something like this, but unfortunately does not work, nor does Iframe work.

Code: Select all

<img src="http://192.168.178.10:99/cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=USERNAME&pwd=PASSWORD&t=" onClick="lightbox_open('camera', 25400);" "width="222px" height="155px" onload='setTimeout(function() {src = src.substring(0, (src.lastIndexOf("t=")+2))+(new Date()).getTime()}, 1000)' onerror='setTimeout(function() {src = src.substring(0, (src.lastIndexOf("t=")+2))+(new Date()).getTime()}, 5000)' alt='' />

I am using this piece of code in another dashboard and works for me. You know what to do best?

[img]

NewDasboard.jpg (166.69 KiB) Viewed 3023 times

[/img]