Dashticz - General Discussions

[robgeerts]

It's working here.
It's possible that caching is the problem Could you clean the cache of the browser?

You've got at least 2 columns more right now I'll check for the rest of the layout like correct positioning of texts etc.

[SwordFish]

It's working here.
It's possible that caching is the problem Could you clean the cache of the browser?

You've got at least 2 columns more right now I'll check for the rest of the layout like correct positioning of texts etc.

I send you a pm with a screenshot but i think the screenshot isn't send with it so here the screenshot.

[EdwinK]

No, I set my port to 8080 in Kodi, so used that port in Domoticz too.

I did so too, and it didn't work. So, setting it to 9090 made it work. Somehow that is the port that Kodi and Domoticz talk to each other.

[SwordFish]

Its works great. Still not done but will go on tomorrow.

[robgeerts]

No, I set my port to 8080 in Kodi, so used that port in Domoticz too.

I did so too, and it didn't work. So, setting it to 9090 made it work. Somehow that is the port that Kodi and Domoticz talk to each other.

Thanks, will give it a try!

[robgeerts]

Train and traffic info (both dutch) are working again:

Sample usage:

Code: Select all

columns[2]['blocks'] = ['train','traffic']

[robgeerts]

No, I set my port to 8080 in Kodi, so used that port in Domoticz too.

I did so too, and it didn't work. So, setting it to 9090 made it work. Somehow that is the port that Kodi and Domoticz talk to each other.

Thanks, will give it a try!

Too bad... didn't work.
I'm using port 9090 now.. (set in kodi and domoticz).

IP + Port is correct:
2017-04-06 20:27:54.424 Kodi: (Kodi) Connected to '192.168.1.11:9090'.
2017-04-06 20:27:54.425 Kodi: (Kodi) Event: 'On'.

The remote is sending a signal but Kodi doesn't do anything...
App on the phone is working correctly (having the same ip/port)

[HansieNL]

Maybe an icon in front of the text?
fa-train / fa-car

[HansieNL]

I did so too, and it didn't work. So, setting it to 9090 made it work. Somehow that is the port that Kodi and Domoticz talk to each other.

Thanks, will give it a try!

Too bad... didn't work.
I'm using port 9090 now.. (set in kodi and domoticz).

IP + Port is correct:
2017-04-06 20:27:54.424 Kodi: (Kodi) Connected to '192.168.1.11:9090'.
2017-04-06 20:27:54.425 Kodi: (Kodi) Event: 'On'.

The remote is sending a signal but Kodi doesn't do anything...
App on the phone is working correctly (having the same ip/port)

Rob ,what Kodi do you use? Application, LibreELEC or OpenELEC?

[robgeerts]

Maybe an icon in front of the text?
fa-train / fa-car

Done!

Rob ,what Kodi do you use? Application, LibreELEC or OpenELEC?

LibreElec, should work out of the box..

[HansieNL]

I had same kind of problem. I couldn't use Kodi (LibreELEC) in Domoticz a few months ago, but it worked in OpenELEC. Kore app worked well with both versions. OpenELEC and LibreELEC seems not to handle the remote control exactly the same way. I did a LibreELEC update and now it works (just checked to be sure).
Have you already checked if there's a LibreELEC update for your device.

[robgeerts]

Thanks, I'll check later.

Currently I'm working on a multiple screen-function (as requested bij @SwordFish via PM).
This means, you can have 3 (or whatever) columns on the main screen but you can swipe it to left/right for more columns.
This way you can create 1 dashboard for switches, sliders and stuff like that and 1 dashboard for media players, news etc..

[SwordFish]

Thanks for that. You really keep going tonight
Bydeway I use the windows version of Kodi, maybe that is the difference.

[Dropshot]

This dashboard looks amazing!

I've downloaded and extracted the zip to a subfolder in domoticz and changed CONFIG. Question: should it run instantly, or am I missing something, since I don't see a new dashboard?

[Maartenkr]

This is really great!

2 quesions
how do I put a name above it like switch?
and how can i get buienradar back the map?

[robgeerts]

This dashboard looks amazing!

I've downloaded and extracted the zip to a subfolder in domoticz and changed CONFIG. Question: should it run instantly, or am I missing something, since I don't see a new dashboard?

If you downloaded it to a subfolder, you have to call it like this:

http://192.168.1.20:8084/subfolder/index.html
So, first your regular domoticz-path, then subfolder, then index.html

This is really great!

2 quesions
how do I put a name above it like switch?
and how can i get buienradar back the map?

You can enter a title by defining him first, in config.js just after

Code: Select all

var blocks{}

like:

Code: Select all

blocks['blocktitle_1'] = {}
blocks['blocktitle_1']['type'] = 'blocktitle';
blocks['blocktitle_1']['title'] = 'Schakelaars';

If you've done this, you can use it like:

Code: Select all

columns[1]['blocks'] = ['blocktitle_1',106,204,248,295]

What do you mean with your question about buienradar?

[SwordFish]

I'm filling in my dashboard and i noticed that a block with a scene in my case never gets bigger than 4 even if i fill in 12.
Is this correct and that works only with dimmers?
It also don't work if i do idx_3.

Edit: Also the calendar button isn't displaying correct.
Sorry i have the time. Had surgery and sitting at home

[robgeerts]

I'm filling in my dashboard and i noticed that a block with a scene in my case never gets bigger than 4 even if i fill in 12.
Is this correct and that works only with dimmers?
It also don't work if i do idx_3.

Edit: Also the calendar button isn't displaying correct.

I tried this, for my scene with idx 3, and it works:

Code: Select all

var blocks = {}
blocks['s3'] = {}
blocks['s3']['width'] = 12;

var columns = {}
columns[1] = {}
columns[1]['blocks'] = ['blocktitle_1','s1','s3',233,62]
columns[1]['width'] = 5;

Whats wrong with the calendar button?
Edit: Sorry, i see your screenshot now

[SwordFish]

I'm filling in my dashboard and i noticed that a block with a scene in my case never gets bigger than 4 even if i fill in 12.
Is this correct and that works only with dimmers?
It also don't work if i do idx_3.

Edit: Also the calendar button isn't displaying correct.

I tried this, for my scene with idx 3, and it works:

Code: Select all

var blocks = {}
blocks['s3'] = {}
blocks['s3']['width'] = 12;

var columns = {}
columns[1] = {}
columns[1]['blocks'] = ['blocktitle_1','s1','s3',233,62]
columns[1]['width'] = 5;

Whats wrong with the calendar button?
Edit: Sorry, i see your screenshot now

Damm those quotes, i only fill them in by columns

[robgeerts]

Preview with multiple dashboards: