Plugin - Homewizard

Wobbles · Post by **Wobbles** » Friday 17 March 2017 19:54

waaren wrote:Hi Wobbles,

I've setup my test environment on a RPI-3 and updated Domoticz to the latest Beta en your HomeWizard plugin to version 2.09
So far no stops but I get an error message from the plugin and my HomeWizard-rain device in domoticz is not updated.

Please feel free to ask if you need more info from me

Hi waaren,

I know about the rain meter, it's only updated after a change and since the weather is very nice it's not updated at the moment. I will look into the error! Thanks for reporting it to me.

Wobbles · Post by **Wobbles** » Friday 17 March 2017 20:29

Updated to version 2.0.11

brogen67 · Post by **brogen67** » Saturday 18 March 2017 13:06

Wobbles wrote: Hi Brogen,

Can you please sent me the output of: http://HOMEWIZARD_IPADDRESS/HOMEWIZARD_PASSWORD/swlist

For me it seems you have a device that is causing the error...

Hi Wobbles, here is the output :

Code: Select all

{
  "status": "ok",
  "version": "3.372",
  "request": {
    "route": "/swlist"
  },
  "response": [
    {
      "id": 0,
      "name": "Bloc TV",
      "type": "switch",
      "status": "on",
      "favorite": "no"
    },
    {
      "id": 1,
      "name": "Prise 2",
      "type": "switch",
      "status": "on",
      "favorite": "no"
    },
    {
      "id": 2,
      "name": "Prise 3",
      "type": "switch",
      "status": "off",
      "favorite": "no"
    },
    {
      "id": 3,
      "name": "Le bas",
      "type": "somfy",
      "mode": 0,
      "favorite": "no"
    },
    {
      "id": 4,
      "name": "Le haut",
      "type": "somfy",
      "mode": 0,
      "favorite": "no"
    },
    {
      "id": 5,
      "name": "La maison",
      "type": "somfy",
      "mode": 0,
      "favorite": "no"
    },
    {
      "id": 6,
      "name": "Salon",
      "type": "somfy",
      "mode": 0,
      "favorite": "no"
    },
    {
      "id": 7,
      "name": "Salle a manger",
      "type": "somfy",
      "mode": 0,
      "favorite": "no"
    },
    {
      "id": 8,
      "name": "Chambre bebe",
      "type": "somfy",
      "mode": 0,
      "favorite": "no"
    },
    {
      "id": 9,
      "name": "Cuisine",
      "type": "somfy",
      "mode": 0,
      "favorite": "no"
    },
    {
      "id": 10,
      "name": "Terrasse",
      "type": "somfy",
      "mode": 0,
      "favorite": "no"
    },
    {
      "id": 11,
      "name": "Chambre d amis",
      "type": "somfy",
      "mode": 0,
      "favorite": "no"
    },
    {
      "id": 12,
      "name": "Salle de bains",
      "type": "somfy",
      "mode": 0,
      "favorite": "no"
    },
    {
      "id": 13,
      "name": "Chambre",
      "type": "somfy",
      "mode": 0,
      "favorite": "no"
    },
    {
      "id": 14,
      "name": "Bureau",
      "type": "somfy",
      "mode": 0,
      "favorite": "no"
    },
    {
      "id": 15,
      "name": "Porte Garage",
      "type": "asun",
      "mode": 0,
      "favorite": "no"
    },
    {
      "id": 16,
      "name": "Salon Ventilo",
      "type": "dimmer",
      "status": "off",
      "dimlevel": 0,
      "favorite": "no"
    },
    {
      "id": 17,
      "name": "Allumage NAS",
      "type": "virtual",
      "status": "off",
      "favorite": "no"
    },
    {
      "id": 18,
      "name": "Sirene",
      "type": "virtual",
      "status": "off",
      "favorite": "no"
    },
    {
      "id": 19,
      "name": "Filtre Piscine",
      "type": "switch",
      "status": "off",
      "favorite": "no"
    },
    {
      "id": 20,
      "name": "Salon",
      "type": "dimmer",
      "status": "off",
      "dimlevel": 0,
      "favorite": "no"
    },
    {
      "id": 21,
      "name": "Prise Noel 1",
      "type": "switch",
      "status": "off",
      "favorite": "no"
    },
    {
      "id": 22,
      "name": "Prise Noel 2",
      "type": "switch",
      "status": "off",
      "favorite": "no"
    },
    {
      "id": 23,
      "name": "Prise Noel 3",
      "type": "switch",
      "status": "off",
      "favorite": "no"
    },
    {
      "id": 24,
      "name": "Prise buches",
      "type": "switch",
      "status": "off",
      "favorite": "no"
    },
    {
      "id": 25,
      "name": "Inter Esca Ext",
      "type": "switch",
      "status": "off",
      "favorite": "no"
    },
    {
      "id": 26,
      "name": "Chauffe serviet",
      "type": "switch",
      "status": "on",
      "favorite": "no"
    }
  ]
}

I just updated your plugin, but there si still something wrong somewhere ^^

For tests, only wattcher is added to domoticz for the moment :

2017-03-18 13:11:18.107 (Homewizard) Exiting work loop...
2017-03-18 13:11:18.107 (Homewizard) Stopped.
2017-03-18 13:11:21.866 (Homewizard) Initialized version 2.0.11, author 'Wobbles'
2017-03-18 13:11:21.878 (Homewizard) Update interval set to 20
2017-03-18 13:11:21.878 (Homewizard) Full update after 20 polls
2017-03-18 13:11:23.203 (Homewizard) Update 0:'590;13880.0' (Homewizard - Energymeter)
2017-03-18 13:11:23.203 (Homewizard) No. of switches found: 27
2017-03-18 13:11:23.205 (Homewizard) Update 1:'' (Homewizard - bloc tv)
2017-03-18 13:11:23.208 (Homewizard) Update 1:'' (Homewizard - chauffe serviet)
2017-03-18 13:11:23.208 (Homewizard) No. of thermometers found: 3
2017-03-18 13:11:23.209 (Homewizard) Update 0:'20.1;5;2' (Homewizard - Salon)
2017-03-18 13:11:23.210 (Homewizard) Update 0:'9.9;70;3' (Homewizard - Dehors)
2017-03-18 13:11:23.211 (Homewizard) Update 0:'20.0;50;1' (Homewizard - Etage)
2017-03-18 13:11:23.212 (Homewizard) No. of sensors found: 5
2017-03-18 13:11:23.213 (Homewizard) Update 0:'0.0;2.8' (Homewizard - Regen)
2017-03-18 13:11:31.521 (Homewizard) Update 1:'' (Homewizard - Detecteur Salon)
2017-03-18 13:11:31.524 (Homewizard) Update 1:'' (Homewizard - Garage)
2017-03-18 13:11:31.527 (Homewizard) Update 0:'550;13880.0' (Homewizard - Energymeter)
2017-03-18 13:12:11.518 (Homewizard) Update 0:'20.0;51;1' (Homewizard - Etage)
2017-03-18 13:12:51.568 (Homewizard) Update 0:'20.1;55;1' (Homewizard - Etage)
2017-03-18 13:12:51.572 (Homewizard) Update 0:'890;13880.0' (Homewizard - Energymeter)
2017-03-18 13:13:11.548 (Homewizard) Update 0:'650;13880.0' (Homewizard - Energymeter)
2017-03-18 13:13:31.567 (Homewizard) Update 0:'9.8;70;3' (Homewizard - Dehors)
2017-03-18 13:13:31.569 (Homewizard) Update 0:'20.1;56;1' (Homewizard - Etage)
2017-03-18 13:14:11.557 (Homewizard) Update 0:'20.1;58;1' (Homewizard - Etage)
2017-03-18 13:14:31.587 (Homewizard) Update 0:'640;13880.0' (Homewizard - Energymeter)
2017-03-18 13:14:51.562 (Homewizard) Update 0:'20.2;59;1' (Homewizard - Etage)
2017-03-18 13:15:11.585 (Homewizard) Update 0:'9.9;70;3' (Homewizard - Dehors)
2017-03-18 13:15:51.582 (Homewizard) Update 0:'9.8;70;3' (Homewizard - Dehors)

brogen67 · Post by **brogen67** » Monday 20 March 2017 8:29

Hi,

I let the script run for a complete day. Sadely, I don't have all infos from the homewizard.

The wattcher doesn't have the same daily consumption in domoticz and homewizard

And, thermometers doesn't refresh every poll.

: 2017-03-20 08_25_28-Domoticz.png (10.27 KiB) Viewed 4017 times

: 2017-03-20 08_25_39-Domoticz.png (21.69 KiB) Viewed 4017 times

Wobbles · Post by **Wobbles** » Wednesday 22 March 2017 20:58

Hi Brogen67,

I never checked the results from Homewizard and Domoticz but will start to do so

The temp sensors are only updated when a value (temp or hum) changes, this is standard behavior and I think it should stay that way. I only changed it for the rainmeter since it doesn't often rain enough so it show red most of the time.

Updated to version 2.0.13

brogen67 · Post by **brogen67** » Thursday 23 March 2017 11:32

Hi Wobbles,

So, I had problem (with 2.0.12) > Domoticz goes Offline.

I just updated to the 2.0.13. I'll see

Thanks to trying to help us with your plugin

.

Wobbles · Post by **Wobbles** » Saturday 25 March 2017 13:30

Just updated the plugin to version 2.0.16

waaren · Post by **waaren** » Saturday 25 March 2017 23:23

Hi Wobbles,

just updated Domoticz to: 3.7153 and HomeWizard plugin to 2.0.16. Previous plugin version was also stable.
Thanks for your continuous efforts to improve this plugin.
Much appreciated.

patricknooijen · Post by **patricknooijen** » Sunday 26 March 2017 21:10

Plug-in works for all my switches and my doorbell.
Any idea when energylink support will be added?

brogen67 · Post by **brogen67** » Monday 27 March 2017 15:41

Hi all,

Since the V2.0.12 this plugin looks stable for me.

I just have a little problem... For my wattcher, datas are not similars between homewizard and domoticz... this is a little difference (arround 0.2-0.5kw/day) but this little difference x 365 days...

: 2017-03-27 15_36_10-Domoticz.png (31.95 KiB) Viewed 3941 times

Do you think it's possible to improve that ?

Wobbles · Post by **Wobbles** » Tuesday 28 March 2017 20:10

Updated to version 2.0.17

The energylink should be implemented but since I don't own one I didn't fully test it so please let me know if and how it works.

@brogen: I noticed the same. I think this is because of the switch I choose to use. I use the "usage (electric)" type which has log reports. Maybe the problem is solved when using the "Electric (instant + counter)" but this one lacks a nice log report. I am not sure if this is the cause but will test it on my test pi.

brogen67 · Post by **brogen67** » Wednesday 29 March 2017 8:00

Ok Wobbles, i'll wait your tests ^^.

[Edit]

Since this new version, I have an error message in my logs when I start Domoticz.

Code: Select all

 2017-03-29 10:00:16.658 Error: Expected: myVar = Domoticz.Device(Name="myDevice", Unit=0, TypeName="", Type=0, Subtype=0, Switchtype=0, Image=0, Options="", Used=1)
2017-03-29 10:00:16.659 Error: (HomeWizard) 'CDevice_init' failed 'TypeError':'argument 8 must be str, not dict'.
2017-03-29 10:00:16.659 Error: Device creation failed, Device object is not associated with a plugin.

Wobbles · Post by **Wobbles** » Wednesday 29 March 2017 20:23

brogen67 wrote:Since this new version, I have an error message in my logs when I start Domoticz.

Code: Select all

 2017-03-29 10:00:16.658 Error: Expected: myVar = Domoticz.Device(Name="myDevice", Unit=0, TypeName="", Type=0, Subtype=0, Switchtype=0, Image=0, Options="", Used=1)
2017-03-29 10:00:16.659 Error: (HomeWizard) 'CDevice_init' failed 'TypeError':'argument 8 must be str, not dict'.
2017-03-29 10:00:16.659 Error: Device creation failed, Device object is not associated with a plugin.

I think you are not on the latest Domoticz beta? Please try to update Domoticz to the latest beta and see if the error is gone.

brogen67 · Post by **brogen67** » Thursday 30 March 2017 10:42

Domoticz doesn't find any update, and I think I have the lastest version ^^

: 2017-03-30 10_40_57-Domoticz.png (12.61 KiB) Viewed 3904 times

brogen67 · Post by **brogen67** » Monday 03 April 2017 16:25

Hi Wobbles,

Just a little improvement you can do it's with the somfy blinds. It's better if there are "Venitian blinds EU" because you can stop them.

Wobbles · Post by **Wobbles** » Thursday 06 April 2017 21:58

brogen67 wrote:Hi Wobbles,

Just a little improvement you can do it's with the somfy blinds. It's better if there are "Venitian blinds EU" because you can stop them.

I can change it but since I do not know the command to send to the Homewizard (if supported) it doesn't change anything. If you know the stop command please let me know and i'll change the switch.

brogen67 · Post by **brogen67** » Friday 07 April 2017 9:09

For me, I just changed the type of my homewizard device, and it worked.

But, for the command it's :

/sf/0/down
/sf/0/up
/sf/0/stop

: 2017-04-07 09_04_07-Domoticz.png (13.94 KiB) Viewed 3852 times

: 2017-04-07 09_04_13-Domoticz.png (26.27 KiB) Viewed 3852 times

Wobbles · Post by **Wobbles** » Friday 07 April 2017 20:40

I have updated the somfy switch. Please let me know if it works as expected.

treshed · Post by **treshed** » Tuesday 25 April 2017 21:36

Hi,

I just installed the plugin and everything works fine, only the energy and gas meter do not work, they do get some input, but only 10W on the electricity meter at any time during the day, and the gas meter does nothing.

Do I need to set something extra for these meters?

When I changed the settings for the P1 meter (Electricity/Gas) from without decimals to with decimals I got the following in the log:

2017-04-25 21:34:40.983 (HomeControl - Electricity) Updating device from 0:'8850.086;11169.32;0.002;0.001;0;0' to have values 0:'8850.086;11169.34;0.002;0.001;0;0'.
2017-04-25 21:34:40.983 (HomeControl) Update 0:'8850.086;11169.34;0.002;0.001;0;0' (HomeControl - Electricity)

treshed · Post by **treshed** » Wednesday 26 April 2017 16:37

It looks like the plugin gets the settings via http://<ip-adress of homewizard>/<password>/el/get/0/readings

This gives the following information:

status "ok"
version "3.38"
request
route "/el"
response
0
type "electricity"
tariff 1
consumed 8852.452
produced 0.002
1
type "electricity"
tariff 2
consumed 11173.841
produced 0.001
2
type "gas"
consumed 13821.025
timestamp 1493244000

There is no info for current consumption, so the domoticz shows produced, and because I do not have solar panels, this value will stay low. is there another way to get the current consumption value?

Plugin - Homewizard

Re: Plugin - Homewizard

Re: Plugin - Homewizard

Re: Plugin - Homewizard

Re: Plugin - Homewizard

Re: Plugin - Homewizard

Re: Plugin - Homewizard

Re: Plugin - Homewizard

Re: Plugin - Homewizard

Re: Plugin - Homewizard

Re: Plugin - Homewizard

Re: Plugin - Homewizard

Re: Plugin - Homewizard

Re: Plugin - Homewizard

Re: Plugin - Homewizard

Re: Plugin - Homewizard

Re: Plugin - Homewizard

Re: Plugin - Homewizard

Re: Plugin - Homewizard

Re: Plugin - Homewizard

Re: Plugin - Homewizard

Who is online