negative value electricity meter

Moderator: leecollings

Post Reply
ropske
Posts: 483
Joined: Tuesday 12 August 2014 5:37
Target OS: Raspberry Pi / ODroid
Domoticz version: V3_8394
Location: Rumbeke,Belgium
Contact:

negative value electricity meter

Post by ropske »

Hi,
i see some strange values at Total Electricity meter of today, the value is negative.
Someone else also has this problem and knows how to fix this?
Thank you very much.
negatief.jpg
negatief.jpg (265.07 KiB) Viewed 1474 times
Toulon7559
Posts: 859
Joined: Sunday 23 February 2014 17:56
Target OS: Raspberry Pi / ODroid
Domoticz version: <2025
Location: Hengelo(Ov)/NL
Contact:

Re: negative value electricity meter

Post by Toulon7559 »

@ropske

For understanding your problem, please explain how your electricity-values are measured:
P1-meter at grid-interface, or 'own' kWh-meter?
Is it only Consumption, or is it Consumption & Return due to PV-Production?

What is the change in the numbers if you look a few days?
Set1 = RPI-Zero+RFXCom433+S0PCM+Shield for BMP180/DS18B20/RS485+DDS238-1ZNs
Set2 = RPI-3A++RFLinkGTW+ESP8266s+PWS_WS7000
Common = KAKUs+3*PVLogger+PWS_TFA_Nexus
plus series of 'satellites' for dedicated interfacing, monitoring & control.
ropske
Posts: 483
Joined: Tuesday 12 August 2014 5:37
Target OS: Raspberry Pi / ODroid
Domoticz version: V3_8394
Location: Rumbeke,Belgium
Contact:

Re: negative value electricity meter

Post by ropske »

sorry,
this meter is a OWL CM180i single phase meter
Toulon7559
Posts: 859
Joined: Sunday 23 February 2014 17:56
Target OS: Raspberry Pi / ODroid
Domoticz version: <2025
Location: Hengelo(Ov)/NL
Contact:

Re: negative value electricity meter

Post by Toulon7559 »

@ropske

OWL CM180 Single phase OK, but question related to application of the meter is unanswered:
at what cable are you measuring the Power/Energy?
In other words, is the meter fitted between a device and the 230V-network, or other configuration?
What type of device?
Set1 = RPI-Zero+RFXCom433+S0PCM+Shield for BMP180/DS18B20/RS485+DDS238-1ZNs
Set2 = RPI-3A++RFLinkGTW+ESP8266s+PWS_WS7000
Common = KAKUs+3*PVLogger+PWS_TFA_Nexus
plus series of 'satellites' for dedicated interfacing, monitoring & control.
ropske
Posts: 483
Joined: Tuesday 12 August 2014 5:37
Target OS: Raspberry Pi / ODroid
Domoticz version: V3_8394
Location: Rumbeke,Belgium
Contact:

Re: negative value electricity meter

Post by ropske »

hello,
i mounted it on the phase coming from electricity meter to my electrical cabinet.
so incoming phase for my house after electricity meter
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest