Control LED with RFXtrx433 USB 433.92MHz

Topics (not sure which fora)
when not sure where to post, post here and mods will move it to right forum.

Moderators: leecollings, remb0

User avatar
CopyCatz
Developer
Posts: 123
Joined: Thursday 11 July 2013 17:28
Target OS: -
Domoticz version:
Location: Outer Heaven
Contact:

Re: Control LED with RFXtrx433 USB 433.92MHz

Post by CopyCatz »

On the remote I see color up & down, can we specify an rgb value through rfxcom?
maxtrash
Posts: 106
Joined: Tuesday 06 August 2013 1:31
Target OS: -
Domoticz version:
Contact:

Re: Control LED with RFXtrx433 USB 433.92MHz

Post by maxtrash »

Definitely very interesting. Since I'm rather clueless on led lightning what other components should I order on dx?
goedh452
Posts: 17
Joined: Thursday 08 August 2013 15:45
Target OS: -
Domoticz version:
Contact:

Re: Control LED with RFXtrx433 USB 433.92MHz

Post by goedh452 »

CopyCatz wrote:On the remote I see color up & down, can we specify an rgb value through rfxcom?
Does anyone have the answer to this question? I already have a RGB led strip. Controlling it with Domoticz would be great!
User avatar
robpow
Posts: 38
Joined: Friday 19 July 2013 19:28
Target OS: Raspberry Pi / ODroid
Domoticz version: Beta :)
Location: .se
Contact:

Re: Control LED with RFXtrx433 USB 433.92MHz

Post by robpow »

goedh452 wrote:
CopyCatz wrote:On the remote I see color up & down, can we specify an rgb value through rfxcom?
Does anyone have the answer to this question? I already have a RGB led strip. Controlling it with Domoticz would be great!
Not from what I've seen. The LWRF RGB LED support is the same as what the LWRF RGB remote provides which is, colour and subcolour selection and automatic cycling. No direct colour selection.

Matt
tjoep
Posts: 9
Joined: Thursday 01 August 2013 21:36
Target OS: -
Domoticz version:
Location: Harmelen
Contact:

Re: Control LED with RFXtrx433 USB 433.92MHz

Post by tjoep »

jeroenkl wrote:http://dx.com/p/mini-rgb-led-wireless-r ... 025-191275
is working!
The version non-RGB isn't!
So this controller can be controlled by Domoticz? That would be great.
Is it also possible to control the specific colors?
b_weijenberg
Posts: 518
Joined: Friday 12 July 2013 18:13
Target OS: -
Domoticz version:
Location: Netherlands
Contact:

Re: Control LED with RFXtrx433 USB 433.92MHz

Post by b_weijenberg »

The RGB LED driver can only be switched ON/OFF.
It has no color selection but a color cycle with only a few colors.

The MDREMOTE is a one color LED driver.

Some other RGB LED drivers will be tested soon and hopefully with color selection.
RFX-433, RFX-433EMC, RFX-868
b_weijenberg
Posts: 518
Joined: Friday 12 July 2013 18:13
Target OS: -
Domoticz version:
Location: Netherlands
Contact:

Re: Control LED with RFXtrx433 USB 433.92MHz

Post by b_weijenberg »

RFXtrx433 Type1 version 71 can control these dx.com RGB modules:

This one has a learn option and any ID can be used: http://dx.com/p/rf-remote-touch-rgb-controller-130913

This one has a fixed ID and the ID of the remote must be used: http://dx.com/p/wireless-touch-panel-re ... ight-67412
Use Type2 firmware to receive the remote ID
RFX-433, RFX-433EMC, RFX-868
fldc
Posts: 2
Joined: Friday 25 October 2013 13:58
Target OS: -
Domoticz version:
Contact:

Re: Sv: Control LED with RFXtrx433 USB 433.92MHz

Post by fldc »

b_weijenberg wrote:RFXtrx433 Type1 version 71 can control these dx.com RGB modules:

This one has a learn option and any ID can be used: http://dx.com/p/rf-remote-touch-rgb-controller-130913

This one has a fixed ID and the ID of the remote must be used: http://dx.com/p/wireless-touch-panel-re ... ight-67412
Use Type2 firmware to receive the remote ID
Great, let's hope for some domoticz love to support these to :-)
Using Tapatalk
fldc
Posts: 2
Joined: Friday 25 October 2013 13:58
Target OS: -
Domoticz version:
Contact:

Re: Sv: Control LED with RFXtrx433 USB 433.92MHz

Post by fldc »

tjoep wrote:
jeroenkl wrote:http://dx.com/p/mini-rgb-led-wireless-r ... 025-191275
is working!
The version non-RGB isn't!
So this controller can be controlled by Domoticz? That would be great.
Is it also possible to control the specific colors?
I have a few of these at home to, can they be added to domoticz, if so, how do i figure out id/unit code if they are lightwave devices?
Using Tapatalk
kylegordon
Posts: 26
Joined: Thursday 31 October 2013 23:58
Target OS: Linux
Domoticz version: Trunk
Contact:

Re: Control LED with RFXtrx433 USB 433.92MHz

Post by kylegordon »

I've got hold of 2 of these lovely MDRemote dimmers, and they're absolutely tiny and nice :-)

I've been able to grab their codes using the display undecoded feature of my RFXCom, but I'm wondering how to get Domoticz to control them. Is there a place that I can plug the ID into so that it will control the unit?

Cheers

Kyle
1 x HP DL380 & KVM
1 x RPI
1 x RFXtrx433 V78
11 x LWRF Switches
1 x LIFX
2 x Echo Dots
6 x Byron PIRs
2 x Nexa PIRs
2 x Kodi
2 x ESP8266 MQTT
1 x GPIO/MQTT PIR
1 x GPIO(PWM)/MQTT LEDs
1 x GPIO(SPI)/MQTT LPD6803 LEDs
Lots of Node-Red glue
User avatar
wxop
Posts: 96
Joined: Sunday 24 November 2013 19:13
Target OS: Linux
Domoticz version:
Contact:

Re: Sv: Control LED with RFXtrx433 USB 433.92MHz

Post by wxop »

fldc wrote:
b_weijenberg wrote:RFXtrx433 Type1 version 71 can control these dx.com RGB modules:

This one has a learn option and any ID can be used: http://dx.com/p/rf-remote-touch-rgb-controller-130913

This one has a fixed ID and the ID of the remote must be used: http://dx.com/p/wireless-touch-panel-re ... ight-67412
Use Type2 firmware to receive the remote ID
Great, let's hope for some domoticz love to support these to :-)
I've bought one of these devices, and they work fine in the RFXManager.
Is there anyway to add these devices in Domoticz?
Developer of phpMyDomo, a Web Interface for Domoticz
-----------------------------------------------------------------------
kylegordon
Posts: 26
Joined: Thursday 31 October 2013 23:58
Target OS: Linux
Domoticz version: Trunk
Contact:

Re: Control LED with RFXtrx433 USB 433.92MHz

Post by kylegordon »

The other day I created this request in the tracker http://www.domoticz.com/forum/tracker.php?p=2&t=108

Not sure if it can be voted upon, but you can certainly subscribe to it.
1 x HP DL380 & KVM
1 x RPI
1 x RFXtrx433 V78
11 x LWRF Switches
1 x LIFX
2 x Echo Dots
6 x Byron PIRs
2 x Nexa PIRs
2 x Kodi
2 x ESP8266 MQTT
1 x GPIO/MQTT PIR
1 x GPIO(PWM)/MQTT LEDs
1 x GPIO(SPI)/MQTT LPD6803 LEDs
Lots of Node-Red glue
User avatar
sincze
Posts: 1302
Joined: Monday 02 June 2014 22:46
Target OS: Raspberry Pi / ODroid
Domoticz version: 2024.4
Location: Netherlands / Breda Area
Contact:

Re: Control LED with RFXtrx433 USB 433.92MHz

Post by sincze »

Just ordered my first RGB 3028 led strip. :D

As a lot of DX items described in this topic are sold out :x , what RGB controller should I buy to use the strip in Domoticz and my trusty RFXCom ??

In a different topic I found the TRC02
http://www.aliexpress.com/item/Free-Shi ... .17.szannb

Seems to be a little 'expensive' :D compared to the cost of the LED strip :P
http://www.aliexpress.com/item/Big-Prom ... 92574.html

Or something like this would also work as it seems to be supported natively by domoticz itself:
http://www.aliexpress.com/item/mi-light ... 32503.html
+
http://www.aliexpress.com/item/New-Dimm ... 59729.html
Pass2php
LAN: RFLink, P1, OTGW, MySensors
USB: RFXCom, ZWave, Sonoff 3
MQTT: ZIgbee2MQTT,
ZWAVE: Zwave-JS-UI
WIFI: Mi-light, Tasmota, Xiaomi Shelly
Solar: Omnik, PVOutput
Video: Kodi, Harmony HUB, Chromecast
Sensors: You name it I got 1.
SDISDI
Posts: 17
Joined: Wednesday 09 March 2016 9:18
Target OS: Raspberry Pi / ODroid
Domoticz version: 3.4834
Contact:

Re: Control LED with RFXtrx433 USB 433.92MHz

Post by SDISDI »

Quick silly question!

I bought the DX.COM TRC02 remote (with 3 batteries) - I am trying to learn the ID of the remote. Can I do this inside Domoticz or do I need to use other software?

Thanks.
RFXtrx433E
Hive 2 Active Heating
Owl CM180 Energy Monitor
Various HomeEasy Receivers
LightwaveRF Plug-in sockets
b_weijenberg
Posts: 518
Joined: Friday 12 July 2013 18:13
Target OS: -
Domoticz version:
Location: Netherlands
Contact:

Re: Control LED with RFXtrx433 USB 433.92MHz

Post by b_weijenberg »

See chapter 10 in the RFXtrx User Guide.
beware: some new TRC02 models have again another protocol implemented by our Chinese friends. This version is not working.
RFX-433, RFX-433EMC, RFX-868
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest