Moderator: leecollings
Yes, I think they should add this info into the guide for Nooos as we aremichelz wrote:Thanks Mazzokun, this was my solution!'Mazzokun wrote:Did you Add MQTT Client Gateway with LAN interface in Hardware with port 1883 and ip domoticz ip... ?Caspar wrote:I have the same problem as michelz. Connecting in Eve or Homekit all work ok, status reflects the actual status, but I can't make any changes.
I did upgrade today to .5837. Could this be the reason?
It it correct this is not in the guide?
Code: Select all
commandArray = {}
DomDevice = 'Lounge Touch V';
if devicechanged[DomDevice] then
if(devicechanged[DomDevice]=='Off') then
commandArray['Lounge Touch']='Off';
else
commandArray['Lounge_Touch']='On';
DomValue = otherdevices_svalues[DomDevice];
CalcValue = (DomValue);
commandArray['Lounge Touch']='Set Volume '..CalcValue;
end
end
return commandArrayCode: Select all
2016-11-02 20:27:03.516 User: Admin initiated a switch command (25/LED/Set Level)
2016-11-02 20:27:03.553 LUA: dev Set Level: 96 %
2016-11-02 20:27:03.553 LUA: Value received from Domoticz was 31
2016-11-02 20:27:03.553 LUA: Calculated value for ESP is 1023
2016-11-02 20:27:03.554 LUA: Dimming LED to 1023
2016-11-02 20:27:03.554 LUA: echo Fadetimer=2000,LED1_target=1023 | socat - TCP:192.168.1.10:43333
2016-11-02 20:27:03.518 (Quinled_1) Lighting 5 (LED)
2016-11-02 20:27:04.295 User: Admin initiated a switch command (25/LED/On)
2016-11-02 20:27:04.356 LUA: dev On
2016-11-02 20:27:04.356 LUA: Turning on LED
2016-11-02 20:27:04.357 LUA: echo Fadetimer=2000,LED1_target= 8 | socat - TCP:192.168.1.10:43333
2016-11-02 20:27:04.300 (Quinled_1) Lighting 5 (LED)Code: Select all
2016-11-02 20:28:38.825 User: Admin initiated a switch command (25/LED/Set Level)
2016-11-02 20:28:38.858 LUA: dev Set Level: 40 %
2016-11-02 20:28:38.858 LUA: Value received from Domoticz was 13
2016-11-02 20:28:38.858 LUA: Calculated value for ESP is 196
2016-11-02 20:28:38.858 LUA: Dimming LED to 196
2016-11-02 20:28:38.859 LUA: echo Fadetimer=2000,LED1_target=196 | socat - TCP:192.168.1.10:43333
2016-11-02 20:28:38.827 (Quinled_1) Lighting 5 (LED)
You basically only need to add your "bridge". Try to remove your ~/.homebridge/persist folder and try again.ropske wrote:hi,
i finally managed to install homebridge and start it without errors:
it loads all 'devices' from domoticz as you can see in the log
now, when i startup my Home app on iPhone and press find, it keeps on searching but it does not find anything
Anyone has any idea what i did wrong and where i need to look?
Thank you very much!
Yeah, there is a known issue with dimmers. It is programmed like that, it should send a "On" command right after. Which is weird, of course. I'll remove that code and see if I can make a workaround for the ones that actually NEED the On command right after.hpapagaj wrote:Guys I just updated to iOS10 and now I am using the built in iOS 10 Home app.
There is a problem with slider switch (on iOS 9 with Eve app it worked fine). If I ask for any value it is switches back to a very low value. Ineresting, that in Domoticz the LED slider switch is at the correct position.
--
From the log I see, that Siri is initiated a switch command 25/LED/Set Level -> that's correct, but immediately after that there is a 25/LED/On command. And this is the problem. The LED is already on and this should not be executed (my default brightness is 8 after switch on).
Code: Select all
Nov 04 10:51:02 raspberrypi homebridge[1222]: already in device list!
Nov 04 10:51:05 raspberrypi homebridge[1222]: already in device list!
Nov 04 10:51:08 raspberrypi homebridge[1222]: already in device list!
Nov 04 10:51:38 raspberrypi homebridge[1222]: already in device list!
Nov 04 10:51:41 raspberrypi homebridge[1222]: already in device list!
Nov 04 10:51:44 raspberrypi homebridge[1222]: already in device list!
Nov 04 10:51:53 raspberrypi homebridge[1222]: already in device list!
Nov 04 10:51:56 raspberrypi homebridge[1222]: already in device list!
Nov 04 10:51:59 raspberrypi homebridge[1222]: already in device list!
Interesting that it worked on Eve, but not in Home app. In the worst case I switch back.
Like it says you're trying to add devices that have already been added.Mazzokun wrote:Hi all, now I have this code.. what is it?Code: Select all
Nov 04 10:51:02 raspberrypi homebridge[1222]: already in device list! Nov 04 10:51:59 raspberrypi homebridge[1222]: already in device list!
Delete your home in iOS. Recreate with a new name. Change your bridge name and username in config.json. Delete ~/.homebridge/persist. Restart homebridge.ropske wrote:hi,
i finally managed to install homebridge and start it without errors:
it loads all 'devices' from domoticz as you can see in the log
now, when i startup my Home app on iPhone and press find, it keeps on searching but it does not find anything
Anyone has any idea what i did wrong and where i need to look?
Thank you very much!
pi@raspberrypi:~$ homebridge
*** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi.
*** WARNING *** Please fix your application to use the native API of Avahi!
*** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libd ns_sd&e=node>
*** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not su pported (or only supported partially) in the Apple Bonjour compatibility layer o f Avahi.
*** WARNING *** Please fix your application to use the native API of Avahi!
*** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libd ns_sd&e=node&f=DNSServiceRegister>
[11/4/2016, 12:03:35 AM] Loaded plugin: homebridge-edomoticz
[11/4/2016, 12:03:37 AM] Registering accessory 'homebridge-edomoticz.eDomoticz'
[11/4/2016, 12:03:37 AM] Registering platform 'homebridge-edomoticz.eDomoticz'
[11/4/2016, 12:03:37 AM] ---
[11/4/2016, 12:03:37 AM] Loaded config.json with 0 accessories and 1 platforms.
[11/4/2016, 12:03:37 AM] ---
[11/4/2016, 12:03:37 AM] Loading 1 platforms...
[11/4/2016, 12:03:37 AM] [Domoticz] Initializing eDomoticz platform...
[11/4/2016, 12:03:37 AM] Loading 0 accessories...
[11/4/2016, 12:03:39 AM] [Domoticz] Initializing platform accessory 'Bel voordeu r'...
[11/4/2016, 12:03:39 AM] [Domoticz] Initializing platform accessory 'Domoticz Se curity Panel'...
[11/4/2016, 12:03:39 AM] [Domoticz] Initializing platform accessory 'Drukknop be l'...
[11/4/2016, 12:03:39 AM] [Domoticz] Initializing platform accessory 'Elektricite it'...
[11/4/2016, 12:03:39 AM] [Domoticz] Initializing platform accessory 'Elektricite it Totaal'...
[11/4/2016, 12:03:39 AM] [Domoticz] Initializing platform accessory 'Elektricite itsverbruik'...
[11/4/2016, 12:03:39 AM] [Domoticz] Initializing platform accessory 'Gasverbruik '...
[11/4/2016, 12:03:39 AM] [Domoticz] Initializing platform accessory 'Led Strip1' ...
[11/4/2016, 12:03:39 AM] [Domoticz] Initializing platform accessory 'Regen Meter Rumbeke'...
[11/4/2016, 12:03:39 AM] [Domoticz] Initializing platform accessory 'Slaapkamer Kinderen'...
[11/4/2016, 12:03:39 AM] [Domoticz] Initializing platform accessory 'Slaapkamer Stijn en Evie'...
[11/4/2016, 12:03:39 AM] [Domoticz] Initializing platform accessory 'TL verlicht ing schildpadden'...
[11/4/2016, 12:03:39 AM] [Domoticz] Initializing platform accessory 'TV Living'. ..
[11/4/2016, 12:03:40 AM] [Domoticz] Initializing platform accessory 'Temperatuur Badkamer'...
[11/4/2016, 12:03:40 AM] [Domoticz] Initializing platform accessory 'Temperatuur living'...
[11/4/2016, 12:03:40 AM] [Domoticz] Initializing platform accessory 'TestCamera' ...
[11/4/2016, 12:03:40 AM] [Domoticz] Initializing platform accessory 'Totaal elek '...
[11/4/2016, 12:03:40 AM] [Domoticz] Initializing platform accessory 'Totaal verb ruik wasmaschine'...
[11/4/2016, 12:03:40 AM] [Domoticz] Initializing platform accessory 'UV Meter Ru mbeke'...
[11/4/2016, 12:03:40 AM] [Domoticz] Initializing platform accessory 'UVB lamp sc hildpadden'...
[11/4/2016, 12:03:40 AM] [Domoticz] Initializing platform accessory 'Voordeur'.. .
[11/4/2016, 12:03:40 AM] [Domoticz] Initializing platform accessory 'Wasmachine' ...
[11/4/2016, 12:03:40 AM] [Domoticz] Initializing platform accessory 'Weerstation Rumbeke'...
[11/4/2016, 12:03:40 AM] [Domoticz] Initializing platform accessory 'Wind Meter Rumbeke'...
[11/4/2016, 12:03:40 AM] [Domoticz] Initializing platform accessory 'Zichtbaarhe ids Meter Rumbeke'...
[11/4/2016, 12:03:40 AM] [Domoticz] Initializing platform accessory 'Zonnestrali ngs Meter Rumbeke'...
[11/4/2016, 12:03:40 AM] [Domoticz] Initializing platform accessory 'verbruik wa smachine'...
Scan this code with your HomeKit App on your iOS device to pair with Homebridge:
┌────────────┐
│ 031-45-
Code: Select all
sudo npm rebuildCode: Select all
sudo npm rebuild --unsafe-permCode: Select all
ps aux | grep mosquittoCode: Select all
pi@rasprf /usr/local/lib/node_modules/homebridge $ ps aux |grep mosquitto
mosquit+ 409 0.0 0.3 5188 3480 ? S Nov01 3:20 /usr/sbin/mosquitto -c /etc/mosquitto/mosquitto.conf
pi 13515 0.0 0.2 4280 2004 pts/1 S+ 17:21 0:00 grep --color=auto mosquitto
pi@rasprf /usr/local/lib/node_modules/homebridge $
Code: Select all
pi@rasprf /usr/local/lib/node_modules/homebridge $ ps aux |grep mosquitto
pi 13515 0.0 0.2 4280 2004 pts/1 S+ 17:21 0:00 grep --color=auto mosquitto
pi@rasprf /usr/local/lib/node_modules/homebridge $
Code: Select all
sudo systemctl daemon-reload
sudo systemctl enable mosquito
sudo systemctl start mosquittoUsers browsing this forum: No registered users and 1 guest