New RFLink firmware (R44) now available!
Moderators: leecollings, Stuntteam
- Stuntteam
- Posts: 399
- Joined: Wednesday 06 May 2015 16:39
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
New RFLink firmware (R44) now available!
Brand new RFLink Gateway firmware adds support for Ikea Ansluta, Philips Living Colors Gen1, MySensors devices and has "Mini" GPIO.
For Ansluta or Living Colors you will need a CC2500 module. Details on how to connect these modules are on the Wiring details page.
Changelog:
R44:
- New Device: Ikea Ansluta (2.4 Ghz device, CC2500 transceiver required)
- New Device: Philips Living Colors Generation 1 (2.4 Ghz device, CC2500 transceiver required)
- New Device: Friedland DC44
- New Device: Warema EWFS shutters and awnings
- New Device: Bosch DID09T951, Bosch DID09T950 and compatible ventilation units
- New Device: Siemens SF-01 and compatible ventilation units
- New Device: Wave Design SF-01 and compatible ventilation units
- New Device: Visonic MCT-302 open and close signal
- New Device: Ningbo KD-205-1 switch set
- New Device: Steffen Power Switch (1204380 3M)
- New Device: Bresser weather sensor
- New Device: RFTech 210TX weather sensor
- New Feature: Bluetooth LE Advertisement packet sniffing *experimental* (NRF24L01 required, needs to be wired for MiLight)
- New Feature: MySensors packet sniffing *experimental* (NRF24L01 required, needs to be wired for MiLight)
- New Device: MySensors temperature and humidity devices (more types to follow) (NRF24L01 required, needs to be wired for MiLight)
- Fixed: Improved OWL CM130 recognition
- Fixed: Revolt power reporting corrected
- Fixed: RFmeter values presented in hexadecimal
- Fixed: Improved Baldr signal recognition
- Added: Friedland PIR checksum calculation
- Added: GPIO 4 input and 4 output pins can be used as on/off or push button devices
For Ansluta or Living Colors you will need a CC2500 module. Details on how to connect these modules are on the Wiring details page.
Changelog:
R44:
- New Device: Ikea Ansluta (2.4 Ghz device, CC2500 transceiver required)
- New Device: Philips Living Colors Generation 1 (2.4 Ghz device, CC2500 transceiver required)
- New Device: Friedland DC44
- New Device: Warema EWFS shutters and awnings
- New Device: Bosch DID09T951, Bosch DID09T950 and compatible ventilation units
- New Device: Siemens SF-01 and compatible ventilation units
- New Device: Wave Design SF-01 and compatible ventilation units
- New Device: Visonic MCT-302 open and close signal
- New Device: Ningbo KD-205-1 switch set
- New Device: Steffen Power Switch (1204380 3M)
- New Device: Bresser weather sensor
- New Device: RFTech 210TX weather sensor
- New Feature: Bluetooth LE Advertisement packet sniffing *experimental* (NRF24L01 required, needs to be wired for MiLight)
- New Feature: MySensors packet sniffing *experimental* (NRF24L01 required, needs to be wired for MiLight)
- New Device: MySensors temperature and humidity devices (more types to follow) (NRF24L01 required, needs to be wired for MiLight)
- Fixed: Improved OWL CM130 recognition
- Fixed: Revolt power reporting corrected
- Fixed: RFmeter values presented in hexadecimal
- Fixed: Improved Baldr signal recognition
- Added: Friedland PIR checksum calculation
- Added: GPIO 4 input and 4 output pins can be used as on/off or push button devices
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
-
- Posts: 784
- Joined: Wednesday 10 December 2014 13:06
- Target OS: Linux
- Domoticz version: beta
- Location: Bordeaux France
- Contact:
Re: New RFLink firmware (R44) now available!
This rocks !
Ble show Xiaomi MI Scale packets !
Have to test :
Parrot Flower Power/Pot
Sony Smart Band 2
Ble show Xiaomi MI Scale packets !
Have to test :
Parrot Flower Power/Pot
Sony Smart Band 2
Domoticz stable 3.5877 for real & Domoticz beta for test
Rfxtrxe / RFLink / Milight / Yeelight / Tasmota / MQTT / BLE / Zigate
http://domo-attitude.fr
Rfxtrxe / RFLink / Milight / Yeelight / Tasmota / MQTT / BLE / Zigate
http://domo-attitude.fr
- remb0
- Posts: 499
- Joined: Thursday 11 July 2013 22:21
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: The Netherlands
- Contact:
Re: New RFLink firmware (R44) now available!
great! nice work! keep up the good work!
-
- Posts: 476
- Joined: Monday 14 March 2016 13:55
- Target OS: Linux
- Domoticz version: beta
- Location: Rome, Italy
- Contact:
Re: New RFLink firmware (R44) now available!
Thanks! Can you remind me how to update directly from rpi? Thanks again...
Inviato da Tapatalk
Inviato da Tapatalk
Cubietruck - Linux cubietruck 4.13.16 (Debian GNU/Linux 8 (jessie)) + Domoticz + RFLink, Xiaomi Gateway, Owl USB, Yeelight Color and B/W, ESP8266, Broadlink RM2, Netatmo Thermostat
-
- Posts: 1601
- Joined: Friday 18 October 2013 23:33
- Target OS: Raspberry Pi / ODroid
- Domoticz version: BETA
- Location: Arnhem/Nijmegen Nederland
- Contact:
Re: New RFLink firmware (R44) now available!
great guys... Cannot buy the sensors with the speed you implement ...
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups
- thecosmicgate
- Posts: 188
- Joined: Monday 06 April 2015 14:37
- Target OS: Linux
- Domoticz version: newest
- Location: The Netherlands / Hoeven
- Contact:
Re: New RFLink firmware (R44) now available!
Thnx again Bosch works on rflink but at the moment not within domoticz
It's nice to be important, but it's more important to be nice
Scooter ;)
Scooter ;)
- Westcott
- Posts: 423
- Joined: Tuesday 09 December 2014 17:04
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: UK - Glos
- Contact:
Re: New RFLink firmware (R44) now available!
Thanks!
I'm now getting this message a few times per hour, never saw it before -
Error: RFLink: Error/Unknown command received!...
I'm now getting this message a few times per hour, never saw it before -
Error: RFLink: Error/Unknown command received!...
Zwave - Sigma Z+ stick, Fibaro, Horstmann, Neo Coolcam, EUROtronic
RFlink - IR detectors and temperatures
Wifi - YeeLights, ESP32s, Anoop sockets
Zigbee - lots with zigbee2mqtt and ZbBridge
RFlink - IR detectors and temperatures
Wifi - YeeLights, ESP32s, Anoop sockets
Zigbee - lots with zigbee2mqtt and ZbBridge
-
- Posts: 22
- Joined: Wednesday 05 October 2016 7:46
- Target OS: NAS (Synology & others)
- Domoticz version:
- Contact:
Re: New RFLink firmware (R44) now available!
Nice work.
Verstuurd vanaf mijn SM-G920F met Tapatalk
Verstuurd vanaf mijn SM-G920F met Tapatalk
-
- Posts: 51
- Joined: Friday 18 September 2015 21:46
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: New RFLink firmware (R44) now available!
Mhh strange, my log is also getting filled with these. Before the upgrade i had no issues.Westcott wrote:Thanks!
I'm now getting this message a few times per hour, never saw it before -
Error: RFLink: Error/Unknown command received!...
Seems to happen every minute:
2016-10-27 22:10:09.171 (rflink) Temp + Humidity (Vochtigheid)
2016-10-27 22:10:14.927 Hardware Monitor: Fetching data (System sensors)
2016-10-27 22:10:39.409 Error: RFLink: Error/Unknown command received!...
2016-10-27 22:10:44.965 Hardware Monitor: Fetching data (System sensors)
- Stuntteam
- Posts: 399
- Joined: Wednesday 06 May 2015 16:39
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: New RFLink firmware (R44) now available!
redownload and reflash the file if you see those errors.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
-
- Posts: 4
- Joined: Thursday 27 October 2016 10:25
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: New RFLink firmware (R44) now available!
Hi,
I tried that, but I also still get the errors. I've reverted back to R43 and I don't get that error in the logs anymore.
I tried that, but I also still get the errors. I've reverted back to R43 and I don't get that error in the logs anymore.
- Westcott
- Posts: 423
- Joined: Tuesday 09 December 2014 17:04
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: UK - Glos
- Contact:
Re: New RFLink firmware (R44) now available!
What you need is Version: 44.8
Are you still on build 7?
Are you still on build 7?
Zwave - Sigma Z+ stick, Fibaro, Horstmann, Neo Coolcam, EUROtronic
RFlink - IR detectors and temperatures
Wifi - YeeLights, ESP32s, Anoop sockets
Zigbee - lots with zigbee2mqtt and ZbBridge
RFlink - IR detectors and temperatures
Wifi - YeeLights, ESP32s, Anoop sockets
Zigbee - lots with zigbee2mqtt and ZbBridge
-
- Posts: 4
- Joined: Thursday 27 October 2016 10:25
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: New RFLink firmware (R44) now available!
Ah, I was on build 7, that might be it.
-
- Posts: 51
- Joined: Friday 18 September 2015 21:46
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: New RFLink firmware (R44) now available!
Fixed it for me, also was on build 7, now on 8. Thanks
- bizziebis
- Posts: 182
- Joined: Saturday 19 October 2013 14:00
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.8805
- Location: The Netherlands
- Contact:
Re: New RFLink firmware (R44) now available!
How can I use Philips Living Colors Generation 1? I have a CC2500 module attached to the RFLink and it's activated. But I don't see anything when I press the remote..
Edit:
I messed up the wiring. Now I see the remote when I press it, only sending it back to the lamp doesn't work.
Edit:
I messed up the wiring. Now I see the remote when I press it, only sending it back to the lamp doesn't work.
-
- Posts: 3
- Joined: Wednesday 02 November 2016 19:01
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Latest
- Location: NL
- Contact:
Re: New RFLink firmware (R44) now available!
Since upgrading to RFLink VER=1.1;REV=44;BUILD=08;
I have problems with my MiLight bulb, they don't respond anymore.
If i reflash back to R43 everything starts working again.
This is the Domoticz log;
The settings i did within the flash tool;
Any clue what this could be?
I have problems with my MiLight bulb, they don't respond anymore.
If i reflash back to R43 everything starts working again.
This is the Domoticz log;
Code: Select all
2016-11-02 19:05:00.288 User: Admin initiated a switch command (9/Bedroom Light/Set Level)
2016-11-02 19:05:00.289 RFLink Sending: 10;MiLightv1;0169;01;00ad;ON
2016-11-02 19:05:00.438 Error: RFLink: Error/Unknown command received!...
2016-11-02 19:05:00.439 RFLink Sending: 10;MiLightv1;0169;01;00ad;BRIGHT
2016-11-02 19:05:00.514 Error: RFLink: Error/Unknown command received!...
2016-11-02 19:05:00.515 (RFLink) Lighting Limitless/Applamp (Bedroom Light)
Code: Select all
20;04;STATUS;setRF433=ON;setNodoNRF=OFF;setMilight=ON;setLivingColors=OFF;setAnsluta=OFF;setGPIO=OFF;setBLE=OFF;setMysensors=ON;
10;setnodonrf=off;
20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R44;
20;01;MySensors=ON;
10;setMilight=on;
20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R44;
20;01;MiLight=ON;
10;setMySensors=on;
20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R44;
20;01;MySensors=ON;
-
- Posts: 784
- Joined: Wednesday 10 December 2014 13:06
- Target OS: Linux
- Domoticz version: beta
- Location: Bordeaux France
- Contact:
Re: New RFLink firmware (R44) now available!
You have to choose between milight or mysensors but not both on the same time.
For the moment
For the moment
Domoticz stable 3.5877 for real & Domoticz beta for test
Rfxtrxe / RFLink / Milight / Yeelight / Tasmota / MQTT / BLE / Zigate
http://domo-attitude.fr
Rfxtrxe / RFLink / Milight / Yeelight / Tasmota / MQTT / BLE / Zigate
http://domo-attitude.fr
- Stuntteam
- Posts: 399
- Joined: Wednesday 06 May 2015 16:39
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: New RFLink firmware (R44) now available!
Next release will have a solution so that you can use both
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
-
- Posts: 3
- Joined: Wednesday 02 November 2016 19:01
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Latest
- Location: NL
- Contact:
Re: New RFLink firmware (R44) now available!
Same problem with everything off except MiLight
Code: Select all
20;03;VER=1.1;REV=44;BUILD=08;
10;status;
20;04;STATUS;setRF433=ON;setNodoNRF=OFF;setMilight=ON;setLivingColors=OFF;setAnsluta=OFF;setGPIO=OFF;setBLE=OFF;setMysensors=ON;
10;SetMySensors=off;
20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R44;
20;01;MiLight=ON;
20;02;Alecto V4;ID=5e68;TEMP=00bf;
10;setBLE=off;
20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R44;
20;01;MiLight=ON;
10;setMilight=on;
20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R44;
20;01;MiLight=ON;
10;setnodonrf=off;
20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R44;
10;setLivingColors=off;
20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R44;
10;setBLE=off;
20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R44;
20;01;Alecto V4;ID=5e68;TEMP=00bf;
10;setGPIO=off;
20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R44;
Code: Select all
2016-11-02 20:50:04.324 User: Admin initiated a switch command (9/Bedroom Light/Set Level)
2016-11-02 20:50:04.326 RFLink Sending: 10;MiLightv1;0169;01;0023;ON
2016-11-02 20:50:04.408 Error: RFLink: Error/Unknown command received!...
2016-11-02 20:50:04.409 RFLink Sending: 10;MiLightv1;0169;01;0023;BRIGHT
2016-11-02 20:50:04.485 Error: RFLink: Error/Unknown command received!...
-
- Posts: 19
- Joined: Sunday 13 September 2015 20:24
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: New RFLink firmware (R44) now available!
Hi, how do i control the living colors generation 1 from within domoticz?
I have the rflink with a cc2500 attached to it with firmware r44.
I have the rflink with a cc2500 attached to it with firmware r44.
Who is online
Users browsing this forum: No registered users and 0 guests