Modify DZ Vents [Solved]

[alarm_guy1]

Hi Guys,
I have for me an excellent DZ Vents Script created for me, it runs nearly every light in the house, however I could do with some assistance to tweak it a bit.

I'm going to add a door sensor to my bathroom door and would like to have it set like so:

if detector picks you up and the door remains open continue as normal
if the door is closed regardless of the detector state, lights to come on indefinately until door is opened but @20%
and after 23:30 just come on @1% as it is now


Many Thanks

[alarm_guy1]

Forgot to attach code

Code: Select all

return  {
            on          =   { 
								devices           =		{  
															"Bathroom MD Burglar",
														}
                            },
            
            logging     =   {   
                                level           =   domoticz.LOG_DEBUG,
                                marker          =   "Bathroom Motion" 
                            },
                    
    execute = function(dz, item)

        local function logWrite(str,level)
            dz.log(str,level or dz.LOG_DEBUG)
        end

       -- local Lux = dz.devices("Kitchen MD Lux").lux
                local LuxDevice = dz.devices(177)                 -- <<<--- replace xxx by IDX of your Lux device
                local Lux = LuxDevice.lux
        -- local Lights = dz.devices("Bathroom Dimmer Level")
                local Lights = dz.devices(68)                       -- <<<--- replace xxx by IDX of your Bathroom lights
                            
							
        logWrite(LuxDevice.name .. " ==>> Lux:   " .. Lux )
        logWrite(Lights.name ..    " ==>> State: " .. Lights.state)
        logWrite(item.name ..      " ==>> State: " .. item.state)
       
        if Lux < 1020 and item.state == "On" then
            Lights.cancelQueuedCommands()
            
			if dz.time.matchesRule("at 23:30-06:00") then
				Lights.dimTo(01)
			else
				Lights.dimTo(90)
			end
        elseif item.state == "Off" and Lights.state == "On" then 
            Lights.switchOff().afterSec(300) 
        end
    end
}      

Cheers

[waaren]

I'm going to add a door sensor to my bathroom door and would like to have it set like so:

if detector picks you up and the door remains open continue as normal
if the door is closed regardless of the detector state, lights to come on indefinately until door is opened but @20%
and after 23:30 just come on @1% as it is now

If my interpretation of your requirements is correct it could look like

Code: Select all

local bathroomSensor =  "Bathroom MD Burglar"
local bathroomDoor = "Bathroom door"

return
{
    on  =   
    {
        devices =   
        {
            bathroomSensor,
            bathroomDoor,
        },
        
        timer = 
        {
            "every 5 minutes between 23:30 and 06:00",
        },
    },
            
    logging = 
    {   
        level = domoticz.LOG_DEBUG,
        marker = "Bathroom Motion" 
    },
                    
    execute = function(dz, item)

        local function logWrite(str,level)
            dz.log(str,level or dz.LOG_DEBUG)
        end
        
        local door = dz.devices(bathroomDoor)
        local sensor = dz.devices(bathroomSensor)
        
        -- local Lux = dz.devices("Kitchen MD Lux").lux
        local LuxDevice = dz.devices(177)                 -- <<<--- replace xxx by IDX of your Lux device
        local Lux = LuxDevice.lux
        -- local Lights = dz.devices("Bathroom Dimmer Level")
        local Lights = dz.devices(68)                       -- <<<--- replace xxx by IDX of your Bathroom lights
                            
                            
        logWrite(LuxDevice.name .. " ==>> Lux:   " .. Lux )
        logWrite(Lights.name .. " ==>> State: " .. Lights.state)
        logWrite(door.name .. " ==>> State: " .. door.state)
        logWrite(sensor.name .. " ==>> State: " .. sensor.state)
       
        local function timeConditionalDimmer(wake, sleep)
            if not wake then wake = 90 end
            if not sleep then sleep = 1 end
        
            Lights.cancelQueuedCommands()
            if dz.time.matchesRule("at 23:30-06:00") then
                Lights.dimTo(sleep)
            else
                Lights.dimTo(wake)
            end
        end
        
        if item.isTimer then
            if ( door.state == "Closed" ) and ( door.lastUpdate.secondsAgo > 300 ) and ( sensor.lastUpdate.secondsAgo > 300 ) then
                timeConditionalDimmer()
            end
        elseif Lux < 1020 and sensor.state == "On" then
            timeConditionalDimmer()
        elseif door.state == "Closed" then
            timeConditionalDimmer(20)
        elseif sensor.state == "Off" and Lights.state == "On" and door.state == "Open" then 
            Lights.switchOff().afterSec(300) 
        end
    end
}

[alarm_guy1]

Cool cheers.
Im just in the process of adding the contact to my alarm system then I will implement this code.

It wont be for a week or so as I never expected such a swift response.

Many many thanks.
I will let you know how it goes

cheers