Moes ZM-105B-M dimmer don't switch on

[Eugene]

Hi Guys,

I found out recently that i can't turn on the Moes ZM-105B-M dimmer anymore using Domoticz dimmer switch. I can switch it off, i can change level when but can't turn it on. I can also turn it on if i change the switch type in domoticz from "dimmer" to "on/off" but then i lose dim function which is weird.

As a workaround i created a dummy switch in domoticz which sends MQTT message to zigbee2mqtt/0xb0c7defffe1604c2/set {"state_l1": "ON"} but i would like to get my original domoticz dimmer type switch working fully if possible.

Any idea what is going wrong in my setup?

Thanks

[gizmocuz]

Maybe you should tell us what versions of Domoticz and Zigbee2MQTT you are running?

I have to assume you updated them both to the latest version?

If not, 99% sure that solves your issue

When you do, check if you have received new devices as well

[Eugene]

Thanks, good point. Domoticz 2025.1 and Zigbee2MQTT 2.4.0.

I dont see any new devices, all the devices discovered are below. I made device re-discover/re-join recently while i was trying to resolve the issue
I don't use the dimmer often, but i suspect the issue started post Zigbee2MQTT upgrade.

Thanks

moes.png (74.98 KiB) Viewed 164 times