Works properly with beta 11394. Thanks.

fantom wrote: ↑Tuesday 22 October 2019 9:40 Which version of domoticz ?

ver 4.10717

did anyone find a solution?

Error: Satel Integra: bad data length received
Error: Satel Integra: Get info about new data is failed

grucha wrote:I saw the same too. What I found: sensor type has been changed.
All I need to do was to change the device from "Temperature" tab, "Edit" button.
After this I lost no data

Hope it'll help.

but you can only edit name, not type of sensor

My ATD100 stoped working. Since Feb 25 - probably some update was that day. Domoticz see it properly but read 21.5C all the time. Satel interface see real temperature

It works...thanks

Aaaa, my fault. I didt write the important case about using ATD100. On Integra, zone with temperature, must contains string "ATD100". For example "ATD100: room 1". Only this way can I identify ATD100. Integra dont have method of showing where is connected temperature detector. Fantom So it looks I ...

You may disable this script now and use ATD100 from Domoticz :) I dont have this devices, but i wrote support for them. And probably it is works, because user free_nsc using ATD100 :) Fantom ps. I wrote about this earlier. ETHM-1 supports only one connection. I tried free_nsc method trom the first ...

I disabled, not removed :D I know I can use DloadX at 7090 but I need both: Domoticz and script for reading ATD100 at 7094. Only 7094 give me proper answer (when not busy). hex="$(echo -en "\xFE\xFE\x7D\x51\x4F\xE0\xFE\x0D" | nc 192.168.0.25 7091 | hexdump -v -e ' 1/1 "%02X" " "')" echo $hex 22 CB ...

I tried to add ATD-100 but it looks like Domoticz makes Satel busy all the time. hex="$(echo -en "\xFE\xFE\x7D\x51\x4F\xE0\xFE\x0D" | nc 192.168.0.25 7094 | hexdump -v -e ' 1/1 "%02X" " "')" echo $hex 10 42 75 73 79 21 0D 0A EF 00 00 00 00 00 00 00 00 nc 192.168.0.25 7094 Busy! When I remove Satel ...

I have latest 1.07 version 1.05 is old. The best download the latest from Satel. For futer You need a little careful, because they releasing versions with the same numbers but with different dates. And you can have the same version numbers but that other firmware inside (newer and older with this ...

I have such a cable connected all the time.
I can read satel output status but cant switch it from domoticz.
I'll update firmware soon and let you know if helped.

I can switch the output from Integra panel.
I checked Ethm1 firmware, it's 1.05. Can you check yours please.
Maybe I should update.

ps. Hardware was removed and added again.

I made update but still the same: Error: Satel Integra: received frame is too short.

Thanks for quick reply
1. Password was set
2. There is only windows version 4025 in download section. I use RPI. How can I update?

Hello My Domoticz on Raspberry PI (v2.3530) properly recognized Satel Integra 128 WLR devices. I can see 25-BI switches state properly but when I want to switch it from Domoticz I get error: Error sending switch command, check device/hardware ! popup window. Logs shows: 2016-01-04 08:33:21.190 Error ...