Hi there,

I have very simple LUA script that was working well for years but i want to improve it a little.

When my childs switch on the light in the night, before i was switching off after 15 minutos. This is the script that was working well.

Now i want to invoke an option in the HUE bridge that ...

Hi Heggink!

Do you have any updates on the logs every 10 seconds? I put a clean start of the plugin during 1 minute more and less.. Every 10 seconds there is a "Pushing 'onHeartbeatCallback' on to queue". I set the polling to "0" in the config but it did the same with "60". I didn't see any error ...

Uh, ok... it is the hardware bridge not the Android version.

I don't see any error in the logs neither, but i don't know if it is normal all those logs every 10 seconds approx...

2018-09-20 15:29:17.619 (Nuki DoorLock) Pushing 'onHeartbeatCallback' on to queue
2018-09-20 15:29:17.669 (Nuki ...

My Setup:

Synology NAS DS215j, DSM 6.2
Domoticz Beta from Jadahl 9999 with Python
Python from Synology offical rep. 3.5.1
Z-wave (AEOTEC Aeotec Z-Stick Series GEN5,Fibaro FGRM222, FGS222, FGMS001-ZW5 Motion Sensor+)
Philips Hue Bridge

About what type of bridge, i don't know, i though there was ...

Debug logs:

2018-09-19 22:44:32.120 Status: (Nuki DoorLock) Started.
2018-09-19 22:44:33.334 (Nuki DoorLock) Debug logging mask set to: PYTHON PLUGIN QUEUE IMAGE DEVICE CONNECTION MESSAGE ALL
2018-09-19 22:44:33.334 (Nuki DoorLock) 'Mode3':'60'
2018-09-19 22:44:33.334 (Nuki DoorLock) 'DomoticzHash ...

Thank you for your support.

By the way, i noticed that there are errors in the logs:

2018-09-19 22:10:58.086 (Nuki DoorLock) onHeartbeat check locks
2018-09-19 22:11:04.433 Error: (Nuki DoorLock) 'onHeartbeat' failed 'KeyError'.
2018-09-19 22:11:04.433 Error: (Nuki DoorLock) ----> Line 354 in ...

Hi heggink:

First of all, thank you very much for this plugin. I come from your bash scripts.

Tested in Synology with latest Beta with Python 3.5.1 and working. At least, the device is created fine.

I'm very curious if there is a possibility to implement the unlatch function in the same device. I ...

I'm in the same situation:

2018-08-27 12:54:56.672 Status: Executing script: /usr/local/domoticz/var/scripts/tv_alert.sh#
2018-08-27 12:54:56.682 Error: Error executing script command (/usr/local/domoticz/var/scripts/tv_alert.sh#). returned: 32512

The script runs perfectly from CLI.

For ...

Umm, i think the question it isn't how to remove logs but disable them...

In my case, it is due a Hue lights system that is sync with the TV. Every change in tv light makes a log in the lights devices that are wasting my NAS disks.

Hoping this funcionality come to us in near future to extend the ...

Hi:

I've a suggestion/question about Hue integration. I've got, in addition to Hue, a Phillips TV that is sync'ed with Hue. When i put the TV syncing the lights with Hue, Domoticz records and logs every change in Hue's lights, messing up the log and stressing the Synology's disks.

Example (ten ...

My apologies. It seems that my problem was the range. Although the FGS222 [Id 3] is probably the closest routing device, may be it is routing the traffic to the other devices and if it fails, the other devices loose the network.

[Id 9] is other routing device but i guess it is loosing the ...

I have a similar problem with a FGS222. Randomly dead status although it is the closest device.

My tip is to put the Aeotec Gen5 in debug mode from the control panel and it comes online "magically", so the range doesn't seem to be the problem.

Regards,


Be careful with debug mode, the logs ...

I have a similar problem with a FGS222. Randomly dead status although it is the closest device.

My tip is to put the Aeotec Gen5 in debug mode from the control panel and it comes online "magically", so the range doesn't seem to be the problem.

Regards,

Prospere wrote: Saturday 23 September 2017 18:11 I use a Oregon Scientific WMR100 weather station that I found for 30 EUR on a second hand site. Works great!

Hi Prospere:

Could you confirm if you use it (WMR100) by USB? In that case, how do you install it?

I tried with TE923 hardware but no luck.

Thanks in advance!

Hi there!

I've just installed the new FGMS in version 6277. It was included incorrectly cause i had the old fgms.xml config.
I've upgraded the manufacturer and fgmszw5 files like Gravitiz mentioned.
I now have the device reporting "correctly" every motion detection with:

2017-02-09 23:16:57.052 ...

Up!

Any advance on disable logging?

Regards,

Olaf

Up!

I hava the same issue in V2.4015 on a Synology NAS. Any updates??