Search found 45 matches

by bxlouis
Tuesday 10 November 2020 21:50
Forum: Heating/cooling
Topic: Tado Thermostat plugin
Replies: 80
Views: 36061

Re: Tado Thermostat plugin

I thought I had the same problem, could not set the temperature of no more than two rooms. It still looks like it but i have discovered that there is a twist. (program mistake?) As an example, when I change the manual setpoint from Domoticz of the bedroom, the setpoint of the living room changes ...
by bxlouis
Sunday 03 May 2020 10:28
Forum: Temperature and Weather
Topic: Creating air quality sensors - Help required
Replies: 1
Views: 860

Creating air quality sensors - Help required

Hello! I recently created a script which parses different air quality measures: - Particulate Matter PM2.5 (µg/m3) - Particulate Matter PM10 (µg/m3) - O3 Ozone (ppb) - SO2 Sulfur Dioxide (ppb) - CO Carbon Monoxide (ppb) - NO2 Nitrogen Dioxide (ppb) For the 2 first, I created a custom sensors and d ...
by bxlouis
Sunday 26 April 2020 10:53
Forum: Heating/cooling
Topic: Tado Thermostat plugin
Replies: 80
Views: 36061

Re: Tado Thermostat plugin

@Zygoun

To retrieve the information about pollens and outside air, the app uses the following call:

Code: Select all

https://acme.tado.com/v1/homes/homeID/airComfort?longitude=LONGITUDE&latitude=LATITUDE
Are you working on a plugin or something?
by bxlouis
Saturday 25 April 2020 9:42
Forum: Bash / PowerShell / Batch etc.
Topic: Shell script not effective from switch. Why?
Replies: 6
Views: 1085

Re: Shell script not effective from switch. Why?

Hi @Gizmocuz, I have been using the WOL hardware for the last few years. However I have never found a right solution to put a Mac to sleep immediately from a switch on the forum. At the beginning (cf. first message) I tried to simply add the sleep command to the OFF action but I ran into the issue I ...
by bxlouis
Saturday 25 April 2020 2:13
Forum: Bash / PowerShell / Batch etc.
Topic: Shell script not effective from switch. Why?
Replies: 6
Views: 1085

Re: Shell script not effective from switch. Why?

After searching for a while I decided to go for another solution which works well. The issue is not solved but I got what I wanted to achieve. If anyone is interested, this allows to setup a switch which will wake up and put your Mac to sleep. It is rather quick and dirty and I am sure there are ...
by bxlouis
Saturday 25 April 2020 0:43
Forum: Bash / PowerShell / Batch etc.
Topic: Shell script not effective from switch. Why?
Replies: 6
Views: 1085

Re: Shell script not effective from switch. Why?

Hi @FireWizard, Thank you for your reply. I will take the time to read the thread carefully as after my first reading, I don't quite understand how they solved the issue! No typo in the script, it works fine like that. I guess the author of the script removed the "p" that to avoid any mistake ...
by bxlouis
Friday 24 April 2020 18:00
Forum: Bash / PowerShell / Batch etc.
Topic: Shell script not effective from switch. Why?
Replies: 6
Views: 1085

Shell script not effective from switch. Why?

Hi y'all! I am trying to make a switch wake-up and sleep my Mac. In order to make it sleep, I have done the following: 1. Install "expect" package on my RPi. 2. Created a script test.sh in domoticz/scripts/ (cf. below) 3. Ran chmod +x test.sh 4. Created a virtual switch and mentioned "script://test ...
by bxlouis
Sunday 15 December 2019 14:47
Forum: Bash / PowerShell / Batch etc.
Topic: pruning script does not run (from domoticz wiki)
Replies: 8
Views: 3121

Re: pruning script does not run (from domoticz wiki)

I'm getting the same error, anyone knows how to fix this?
It would be great to update the Domoticz wiki with this.
by bxlouis
Saturday 07 December 2019 18:18
Forum: Other questions and discussions
Topic: Use Fibaro roller shutter as switch?
Replies: 0
Views: 175

Use Fibaro roller shutter as switch?

Hi,

I would like to know if it is possible to use a Fibaro Roller Shutter 2 (FGR222) as a simple ON/OFF switch with Domoticz.

Hope someone can help!

Thanks!
by bxlouis
Friday 29 November 2019 22:15
Forum: Heating/cooling
Topic: Tado Thermostat plugin
Replies: 80
Views: 36061

Re: Tado Thermostat plugin

I thought I had the same problem, could not set the temperature of no more than two rooms. It still looks like it but i have discovered that there is a twist. (program mistake?) As an example, when I change the manual setpoint from Domoticz of the bedroom, the setpoint of the living room changes ...
by bxlouis
Wednesday 27 November 2019 21:05
Forum: Heating/cooling
Topic: Tado Thermostat plugin
Replies: 80
Views: 36061

Re: Tado Thermostat plugin

Hi, First thanks for this amazing plugin. I am wondering if someone is still maintaining it and could allow to retrieve and control the "Home/Away" and "Open Window" switches. I know the plugin already retrieves the "Home/Away" status, but it seems that it is read-only as I cannot switch it on or ...
by bxlouis
Monday 11 September 2017 21:39
Forum: Design, usability and languages
Topic: Nest-like dynamic background
Replies: 0
Views: 2009

Nest-like dynamic background

Hi all, I am wondering if it was possible to create a dynamic background for Domoticz which would behave as the Nest Thermostat app/website's interface. Blue sky when sunny, clouds moving in the background when there are clouds and rain falling when raining. I think it would give Domoticz an amazing ...
by bxlouis
Monday 29 May 2017 22:27
Forum: iOS
Topic: homebridge-edomoticz Plugin
Replies: 1715
Views: 415151

Re: homebridge-edomoticz Plugin

Hi,

Maybe it has already been discussed but I can't find it on the forum - maybe I use the wrong keywords :?

I am wondering if it is possible to read the Homekit scenes and display/be able to trigger them from Domoticz?
That would be very useful!
by bxlouis
Monday 29 May 2017 22:17
Forum: Z-Wave
Topic: Devolo Home Ctrl TRV (Danfoss) - Setpoint not working
Replies: 46
Views: 14229

Re: Devolo Home Ctrl TRV (Danfoss) - Setpoint not working

Hi!

Just wondering if someone knows how to update the Devolo TRV's firmware without having to buy the Devolo Home Control solution?
Asking here since people we are focusing on the Devolo TRV.

Thanks!
by bxlouis
Sunday 25 September 2016 1:57
Forum: Python
Topic: Smarter Wifi iKettle 2 script for Domoticz
Replies: 58
Views: 10915

Re: Smarter Wifi iKettle 2 script for Domoticz

Hi, I tried everything I can but I wasn't able to make your script work :( First, I think I had some trouble with screen. Even if I installed it, Monit never detected the process running. I think I did something wrong with the startup.sh file... Chmod is ok, I checked path in every file and still it ...
by bxlouis
Wednesday 21 September 2016 12:57
Forum: iOS
Topic: homebridge-edomoticz Plugin
Replies: 1715
Views: 415151

Re: homebridge-edomoticz Plugin

Hello marci! I am testing Homebridge with a Fibaro Wall Plug. It works great but I think the behavior could be enhanced. For now, the Fibaro Wall Plug is detected as a Domoticz "Light/Switch". So when I say "Siri, turn on/off the Living room's wall plug", Siri tells me he does not recognise any Wall ...
by bxlouis
Saturday 27 August 2016 11:07
Forum: Heating/cooling
Topic: Nest - Gas Boiler Emulation Project
Replies: 1
Views: 844

Re: Nest - Gas Boiler Emulation Project

Solved!

No need to emulate anything. The Nest does not care whether a gas boiler is connected to the HeatLink or not.

The whole thing can be controlled using lua scripts. Hope it helps someone in the same situation.
by bxlouis
Saturday 27 August 2016 11:04
Forum: PHP and all others
Topic: Pass2PHP
Replies: 1509
Views: 797241

Re: LUA Pass2php

Did you know that you can use PHP now directly in domoticz ? For example you could create a test.php file in the www folder if you install php-cgi, and specify the location of this file at the domoticz startup parameters php_cgi_path (for example /usr/bin/php-cgi) then it should work... (just some ...
by bxlouis
Saturday 27 August 2016 10:59
Forum: PHP and all others
Topic: SetPoint related script?
Replies: 2
Views: 851

Re: SetPoint related script?

Hi Egregius, Indeed, I understand PHP better, I see what it does. I own a RPi, how can I install Pass2PHP v2.0 using gizmocuz method? And how should I setup the pass2php.php file? I see that a lot of functions are present but they do not fit my home. Should I just put the NestAwayMode function there ...