Thanks for the script! I use this script to count pulses via S0 from a Finder kwh meter, which logs the generated power and energy from my Steca500 solar inverter. The only problem i see, is that if there are no pulses anymore, the calculated power stays at the last value seen. Can someone explain ...

Would be nice if the script could check if a certain hostname is connected? My iPad is always at home, so that's not helping now.
If i could check if the hostname or maybe the static IP of my iPhone is connected, that would be cool!

I've set parameter 101 to 224 and parameter 111 to 60 seconds. This way, my lux is reported every minute.

I have tried with selective reporting, but i couldn't get it to work like i wanted.

Nice one Thinkpad, very "strak" theme

No solution via OZW, but i managed to calibrate the temp in Domoticz. When you go to Temperature and then click Edit on the device, you calibrate the temp there!

How are you able to edit the device??

Nevermind, found it!

I'm running beta 2.3240

Tried both, but when applying the config then the value is changed to 255 or 0

Not sure what changed, but tried again different values. Looks like it's not working though.

I'm also having problems calibrating the Temperature on the MultiSensor6.
When trying to change the parameter to -2.3, after saving it is changed to 255. I also tried 255 - 23 (for 2.3 degrees) and set the parameter to 232, but then is is changed to 0.
So i'm not able to change it properly.

For the slider issue you should set the minimal and maximum dimming levels in the dimmer 2 parameters. Those are set automatically by the calibration (min 7% max 41%) But i wonder if i can correct this in Domoticz, because the slider in Domoticz is using the same values as the dimmer 2 parameters ...

Yes 9.5W led will work without bypass. Here are my findings: 2-wire setup: The Dimmer works correctly from 9.5W without bypass Everything under 9.5W will need the bypass in a 2-wire setup (but the dimmer is reacting very strange when the dimmer is at 100%, parameter 2 should be at 50%). 3-wire ...