I think the same, no TLS support in Mqtt-Mapper. And my battery only accept secure MQTT.....

OK waltervl,

Thanks for your prompt reply.

I will try that way......

I have a newly installed storage batteri supporting secure MQTT protocol but no autodiscovery. I would like to include it in Domoticz with help of MQTT Client Gateway with LAN interface. Running Domoticz on RPi5 with standard Debian Bookworm, latest updates. I dont know anything about securing MQTT ...

Hello bramv! Thank you for your reply ! Sorry to say, your suggested fix did not work. From what I can see, the error is about the same....by looking at the below, do you have another suggestion?? Thanks in advance! This is what I have installed; Requirement already satisfied: solaredge_modbus in ...

Bumping...

Anybody??

Hello, Domoticz 2024.7 Build 16325 Debian latest updated and upgraded RPi5 8 Gig Since build 16325, I have a problem with the Currently One smartmeter over MQTT. 3 autodiscovered devices (L1, L2, and L3) showing power on each phase is correct. There is one more autodiscovered device (Type: Usage ...

I had the same issue yesterday when I updated to the latest beta, build 16319. New devices were created.
But I think some Netstmo bugs were fixed in this beta. I will wait and see…
/fjuppe

Hello, Can someone with better knowledge than I (linux newbee), help me to understand and solve the problem with this SolarEdge Modbus Plugin. Obviously the module is not found but I dont know how to install it. I have followed all instructions on the github page... I am on latest Domoticz and ...

There is something wrong with the calculation for the widget Netatmo Rain. The total rain is correct but the rainrate is showing wrong value. In devices, the rain data is showing correct ( RainByRate 1.818;1.9 ) and in the rain Widget, rate is shown as "Rate: 0.0001 mm/h" Update 27 October 5.15pm ...

I notice the same behaviour.
I am on 2024.7 build 16286
/fjuppe

Thank you for your push against dzVents…

Hello, I finally got dzVents to work. This is the code for setpoint to Husdata (heatpump interface). To set temperature, you must multiply with 10. To set 10 degrees, send 100. I dont check for same value because I dont use the timer.... return { on = { devices = { 'Set Pool Temp' }, --timer = { 'on ...

Hello,
Thank you "solarboy" for your reply. I already have a Blockly that updates the user variable. Now, what I want to do is use thatvariable as the value ("val=") in the http request but I dont know how to correctly format it....
/fjuppe

Hello, I have tried to search for an answer but without success; This Blockly block updates a parameter (0219) with fixed value = 100 and works OK. But I want to use an existing user variable instead of the fixed value in the URL. Is this possible in Blockly and what would I write as "val ...

Hello,

This Blockly block updates a parameter (0219) with fixed value = 100 and works OK. But I want to use an existing user variable instead of the fixed value in the URL. Is this possible in Blockly and what would I write as "val=" ???

Hello, Since the new Netatmo plugin (in my case I only have weather station) the user validation works OK for me. But, when I look at the values of the Netatmo web GUI, I find that the wind and rain values are not the same in the Domoticz widgets compared to the Netatmo web GUI. Temperatures ...

@homeJLB
I confirm my version is 2024.7 (16265)

/fjuppe

Today I updated to 16265. I deleted old Netatmo hardware/devices, then added the Netatmo Hardware again following the above description. Logged in with ID and Secret and selected Weather Station (I have no other Netatmo devices). A lot of new devices were created, some useful, some not, but thats OK ...

Thank you for fast reply! Can you suggest how to split up the longer code strings in shorter bursts, i.e. below 200 charachters? I understand this has something to do with base64 and some other coding to do but, as a newbie, I dont understand how to do this properly. In the Git Library I found ...

Hello, Just got my Tuya ZS06 ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus Zigbee2MQTT version 1.39.1 Type of Coordinator zStack3x0 Coordinatorrevision 20231111 Coordinator IEEE-adress 0x00124b002f8ac433 Frontend version 0.7.4 Zigbee-herdsman-converters version 19.72.0 Zigbee-herdsman version 0.55.3 I ...