Just got a message that the EEPROM can have 100.000 write cycles, so this is not a good option !
Will have to rebuild domoticz/sketch to support the value/var request option

http://playground.arduino.cc/Code/EEPROM-Flash

Just change the save to eeprom interval a bit? I am writing every 2 hours ...

Greetings guys, I'm just delving into this and trying to get Domoticz to "talk" to the mosquitto MQTT server.
So far I think I'm almost there....
Yes you are almost there, we just need to wait until someone finish the code :D
See http://www.domoticz.com/forum/viewtopic.php?f=6&t=5451 for more ...

ThinkPad wrote:Just buy a Raspberry Pi, will make it a lot easier.
Raspberry Pi is cheap and uses very little power (4-5W).

You are absolutly right, but i realy like the idea! Domoticz running on my OpenWRT router would be awesome!

Connect the RFXtrx to a Windows system, select the protocols to be used for receive, click Set Mode, click Save Settings. The protocol selection is now save in the RFXtrx and restored at start-up.

well yes, i did it several times in the rfxmngr with no success, but now i got it working by ...

Hi guys, i found the problem.

When i am using my RFXtrx433E with latest firmware over LAN i doesn't work (i cant select extra protocols, see error in previous post)
When i connect the RFX to USB > set mode to include Rubicson it immediately starting to work.

So the problem is that i can't select ...

I bought this sensor also.

Do you see the following error in your logs after you "SET" new protocols in Domoticz?

2015-02-02 08:44:12 Error: UNHANDLED PACKET TYPE: FS20 00

What version of Domoticz are you running?

I still need to update the rfxcom to 236, although i don't see important ...

gizmocuz,are you planning to implement the Ethernet Gateway?

Just tried to enable and disable Rubicson protocol (@V2.2252):
Error: UNHANDLED PACKET TYPE: FS20 00

Same message. Could be a Domoticz bug?

edit: Just updated my RFXtrx433E from 235 to 236 error message remains the same.

Ok, RP. Thx for testing! it seems like a bugµ

I just did an update to ...

Just curious. What brand and type sensors you have?

Good question but i really don't know :?

The item on ebay:
http://www.ebay.com/itm/Outdoor-wireless-Sensor-for-Digital-Weather-Station-Outdoor-temperature-Humidity-/261434917342?ssPageName=ADME:L:OU:BE:3160

And here are some photo's:
https ...

Not all protocols can be enabled at the same time, see also this post: http://www.domoticz.com/forum/viewtopic.php?f=6&t=5170&p=32848&hilit=diagram#p32846

It looks like the RFXCOM can receive the temperature fine, but it is not supported by Domoticz (yet).

Hmz ok, do i need to make a feature ...

Thx for the implementation! I was all excited when i just learned about Domoticz, until i saw that there was no support for mysensors (i was still excited, but just a little bit less ). But now there is!
Just want to say: Thanks for all the hard work.

Hi Guys,

I already asked it on Tweakers, but i got no response.

I just bought 3 cheap temp sensors, the sensor is recognized as Alecto WS1700 in RFXmngr when i connect the RFXCOM to my PC with the Rubicson protocol:
https://dl.dropboxusercontent.com/u/2172654/2-b.png

Unfortunately the sensor ...