Hello, an short question: I see that the script 'sees' if the fan was manually turned on before the script does. I would like to use an manual switch also, so i can turn it on before i shower and use this script for the kids or if i forget. How does this work with this script? Does it turn the ...

Still the same issue, little update: I found the switch within Domoticz, but i only can turn the screen OFF. When i open the screen via another wallswitch then the zwave switch can close the screen. But when the screen is closed i hear that earlier 'zoom', so my guess is that it always tries to ...

Hello, an question.. I'm using a Schneider (Mertens) blind-switch (MTN507801) and got a problem. Suddenly out of the blue i can't control the switch anymore via my domoticz. I've tried to exclude, reset and did everything to make it work. The strangest thing is... When i use the switch in my ...

Ok, its a pitty.

Thanks for this info!

Hello, an question:
I can get an free 'sonoff dw2 wifi' doorsensor.
Can i get this working with my Domoticz?

Its not via 433 or Zwave but WIFI.

Thanks

nf999 wrote: ↑Saturday 31 March 2018 21:26
So incidentally this script will go over 10secs. If you don't want this adjust the nr of repetitions to 2, or reduce the timeout to 3 secs in os.capture. This setup was fine for me.

This worked fine for the error, thanks!!

Thank you for the reference! Its very interesting what the API will tell indeed. edit: I have an API key and a user_id; so i can check what the information is @Enphase servers side. This first command (i am new in the API business) works: https://api.enphaseenergy.com/api/v2/systems?key=<MY API KEY ...

Thanks again.

I have this set since june 2019.

I will dive into it, thanks for the tips.
Its al little bit much work for only the "total kwh"
the rest (LIVE) is okay.
I still think its strange that it gives this info via the mentioned URL.

Thanks

Thanks for you answer! I already applied for the API key, hopefully i can manage to use that key and retreive the data direct form the Enphase-server. What i meant: It says the Enphase produced in its liftime: 149064watts, within Domoticz it also says this (149 kwh). I know that this Enphase ...

Hello guys, an question about Enphase, i think its 'ontopic' so this should be the wright place.. I am using Domoticz (and an Toon v2 thermostate as interface) and used the existing 'hardware' to add the Enphase Envoy for my solarpanels. The only thing is that the information isn't correct. Domoticz ...

Managed by doing this: https://www.domoticz.com/forum/viewtopic.php?t=28163 A blockly with: IF > WIND > 10 AND Sunscreen = Open Do: Close Sunscreen Now looking for the best setting; i don't know if it takes the peak ('windvlaag') or the everage windspeed (snelheid in m/s) Edit: It looks like its ...

Oepsie...thanks!
I will try to make it work !

okay, i will take a look. I thought it should be simple, but the wind-sensor gives an output like: 225.00;SW;79;114;15.2;15.2 So i guess the windage (in this example it was 11.4 m/s) is given as : 114. So its not very simple i guess : ) But always nice to learn, the rain LUA word perfectly! What i ...

Hi! No i did not, not for windage. I started with this Buienradar and used 'Expected rain' but that did.t work good. (this: https://www.domoticz.com/wiki/Buienradar ) Thats why i wanted to use the LUA. It should be nice if the LUA was 100% complete, so the windage is integrated. But i can take a ...

And another one ;-).. I see Buienradar can deliver 'windage information' . For an sunscreen its allmost even relevant, maybe even more, that it goes in by an X strenght of windage. Should that be an nice addition? Maybe this one can do the trick? V https://www.domoticz.com/forum/viewtopic.php?t ...

Oh, thats realy a very small difference, didn.t know that

Thanks

Because it now works, another short question ;-) Is it possible to use the lattitude / longtitude thats been used within the Domoticz settings? Within Domoticz you van give a more accurate position then you can within this LUA, like 5.2737338 in stead of only 5.27 for example. That would be nice ...

Have a nice weekend !

I think it works! This is what the LOG says: 2020-06-27 12:25:00.057 Status: LUA: BuienRadar module 2020-06-27 12:25:04.426 Status: EventSystem: Script event triggered: Buienradar 2020-06-27 12:30:00.114 Status: LUA: BuienRadar module 2020-06-27 12:30:00.236 Status: EventSystem: Script event ...

Oepsie... Now i see flgbuienradar was OFF ....should that be the problem? What i did: As an ON action at the switch flgbuienradar it does: http://192.168.1.154:8080/json.htm?type=command&param=switchlight&idx=148&switchcmd=Off So.it should.turn OFF the device 148 (my zwave sunscreen switch) Edit: i ...