I reversed engineered it by using the browser development tools - network console. Though it is not the most beautiful solution, it works. I now have a device (on/off) for the heating and use an external thermometer and other triggers to turn it on or off.

Alas... one step further, but not yet there. https://i.ibb.co/jLHHYV7/Schermafbeelding-2023-12-20-195552.png This parameter 9 (Heating setpoint) now works. I can read and set the setpoint and it actually sets it on the thermostat. The devices that are created are shown here: https://i.ibb.co ...

After more then a year of struggling (even) I give up. I really don't know how you guys have fixed it, but I cannot get it to work. The update progress via the OTA update functionality of Z-Wave PC-controller says it is finished succesfully. But still 4.0 is running. Now even I do not have a ...

Hello all, I have Toon errors in my Domoticz logs again. The testtoonapilib as provided by Waspy is also showing that there cannot be created a Toon object (while this did work before). Have others the same experience? Here the errors (debug=on): 2024-11-18 11:26:40.081 Toon: Worker thread started ...

I have exactly these same issues: Cannot enable geofencing in the Android App.
Android 14. Has anyone found a workaround for this, other than using an old settings.txt which I don't posess?

In addition, I would opt for a LOG_NONE level, to suppress errors from some specific scripts (in my environment, a call to the Denon http API always gives an error (http://192.168.x.y/goform/formiPhoneAppDirect.xml?MV495) when changing the volume.)

Lokonli wrote: ↑Friday 08 September 2023 6:37 In fact the drgl site is quite nice.
Probably it can be used to collect the departure data.

Nice project for the dark winter months

Are the winter months dark enough for (reverse) engineering the drgl site? Do you have some material to have tested?

Following my last post... The EBS bus stops in region Zwolle don't work. They are not enumerated in https://v0.ovapi.nl/stopareacode/ All other busstops do work, only the EBS busses don't. I cannot find out why this is. Can someone point me to the right direction? For instance the busstop 46006650 ...

The updating process seems to work, but still it shows 4.0 and the issue is also still there.
@madpatrick any ideas?

Can you try to set the setpoint to 27 and check what is happening My firmware is 4.2 If yours is 4.0 you need to flash your firmware See download link on the page i gave you I'm following the OTA upgrade manual but I am stuck at the part that says: Select the thermostat general V2 and press Get ...

Your device 2042 should work and change the setpoint. Have you checked your firmware? There is a known issue with setting the setpoint with the default firmware Try to set your setpoint to > 26,5 C. If this is working then the problem is with firmware. You are right, setting the setpoint to .5 ...

Hi Patrick, Thanks for your reply! I'm using this version https://github.com/Cyberwizzard/open-zwave/tree/master Which firmware do you have ? Library Version: 3 Protocol Version: 6.07 Application Version: 4.00 Check out this website https://www.hjemmeautomasjon.no/forums/topic/6330-z-trm3-target ...

Alas... one step further, but not yet there. https://i.ibb.co/jLHHYV7/Schermafbeelding-2023-12-20-195552.png This parameter 9 (Heating setpoint) now works. I can read and set the setpoint and it actually sets it on the thermostat. The devices that are created are shown here: https://i.ibb.co/zGC6bmK ...

I see there is a better heatit058.xml: https://github.com/OpenZWave/open-zwave ... 656fbfb955

I'll try re-include the device using this tonight and let you know the outcome.

Hello all, I have included a Z-TRM3 (ThermoFloor AS Heatit Thermostat TF 058) to my Z-wave network. Image: https://ibb.co/B6PV1G8 The device is working from the Open-Zwave control panel. The parameter "Heating mode setpoint" as shown in the image above set to 195 (19,5 *C) can be used to control the ...

Whats the best way to install ZWave-JS on Windows? Most of the ways listed on the wiki seem to be Linux specific I too would like to hear from someone who transitioned to Z-Wave-JS-UI on Windows. Ever made it installing ZWave-JS UI on Windows? I'm trying to do and already installed Mosquitto, but ...

Following my last post... The EBS bus stops in region Zwolle don't work. They are not enumerated in https://v0.ovapi.nl/stopareacode/ All other busstops do work, only the EBS busses don't. I cannot find out why this is. Can someone point me to the right direction? For instance the busstop 46006650 ...

[/quote]

Any update from eneco?
[/quote]

No update, but I saw it was solved later that day. All toons had D03 issues until tuesday, but since yesterday all is working fine again.

Since today, the certificate of https://api.toon.eu is no longer valid.

I'll try to reach eneco to solve this. In the meantime I'm afraid the toonapilib4domoticz plugin is not operational.

Regards,
Stephan

The busstops region Zwolle have a different way to find the json info of the stops: e.g. the info of https://ovzoeker.nl/halte/c80b2bbc3bb66451ffb36de0d00512f5 can be found with https://ovzoeker.nl/api/arrivals/2495588. I have no clue where the number 2495588 comes from, other then look it up in the ...