It's still early stages - it's just Febalci who wrote it very recently, and I'm the only beta tester :D (I don't know enough about software to help with development). We're the only two on the forum. but so far all monitoring works and arm/disarm works. I don't think Febalci has implemented that ...

Hi Marchino, Attached is a photo showing the pinout. It's not necessary to connect power between the IP board and the FTDI board, but make sure your FTDI board is running at 3V3, not 5V, otherwise you might damage your board. You'll just need to power the IP board with it's normal supply while ...

Connected it up to the alarm panel, and all is working as expected now. I realised that the relay commands being momentary in nature could be handy if I want the act in place of push buttons. Next thing is figuring out how to implement this in my Home Assistant, as I'm not using Domoticz, but I'll ...

Another question I have is, the App Elite firmware allowed me to enable DCHP, but this firmware does not. Does that mean I must now disable my DCHP on my router and set everything to static? I tried reserving a static IP for the MAC address of the IP Module but I can't seem to connect to it through ...

Ok, so I got the 2.10.3628 from AAP, found the firmware update tool online somewhere, managed to use my homemade serial interface dongle to upload the firmware, and now I can telnet :D I haven't connected it to my alarm panel yet, so STATUS gives nothing back, but when I connect through telnet I get ...

I've managed to get hold of an IP-Module, but it has firmware version 2.10.4727, and as it has support for the Elite App control, I suspect I'll be needing firmware from AAP. Problem is, I don't have a D-Link USB. From what I gather though, this is basically just a UART to USB converter. I managed ...

Is my understanding correct that the AAP Elite-S series is a rebranded Crow Runner Series or vice-versa? The PCB's look identical. The firmware version stickers look different though, so perhaps they are not entirely interchangeable? The reason I ask is that I have a Crow Runner series alarm and ...