Hellow
Is there anybody who can/know how to change the code to read status of bypass.

exemple change the line to read status FAN RPM or similar to read / control bypass ?

That's why the author of the OpenHAB binding has implemented a switch which controls if PC or CCEasy is controlling the unit. This should be possible also on other platforms

Btw, he has also implemented a mode switch - Exhaust&Supply, Supply only or Exhaust only. I can't figure out which commands ...

I use port DB9 on the PCB , but:

Limitations
Either the ComfoAir binding or the CCEase Comfocontrol can be active, but not together.
So in this case, there no way to use CCEasy and Domoticz / else ate the same time.
I wonder, beacouse the main board of 350luxe have conectors marked as RS485 ...

In my Zehnder 350lux on the main board is DB9 socket. I have conected RPI _ adapter USB rs232 ( DB9) and cable 3 pins GND, TX,RX, to the Zehnder DB9 and it's working.


Could you tell a bit more about that? What cable have you used exactly? I have the same issue with strange and ever changing ...

In my Zehnder 350lux on the main board is DB9 socket. I have conected RPI _ adapter USB rs232 ( DB9) and cable 3 pins GND, TX,RX, to the Zehnder DB9 and it's working.

Hi,
I have a script with LUA to Energy Meter and Costs with two tariffs.
And I have a problem, when I update domoticz to 4.10717 start the problem.
At this moment device P1 Smart Meter and General Volatage stops working.
And the log with domoticz:

2019-08-08 12:40:37.262 Error: EventSystem: in ...

a view smal problems

1563091783: New client connected from 127.0.0.1 as whr930 (c1, k700).
1563091792: Socket error on client whr930, disconnecting.

and the log from domticz

2019-07-14 10:14:00.811 MQTT: Topic: domoticz/in, Message: { "idx" : 61, "nvalue" : 0, "svalue" :"Unknown"}
2019-07-14 10 ...

Ok I connect to my zehnder350lux, I can select fan speed, i reed temp and orhers. Bit the temp os cery unstable.. somethime 22*C, 65*C, -25*C itp..
https://photos.app.goo.gl/HqxnUav261h1D9Hj8
https://photos.app.goo.gl/1tNHXB4A3H6kASqK6
https://photos.app.goo.gl/Lmbo5tnTMqunNAQu5
https://photos.app ...

I found schematic to the conection with use CCeasy with RPI ?
Is there enybody who can confirm working with domoticz ?

Ok, but who know how to start this plugin with CCeasy Zehnder Panel.