The lan control remains enabled after firmware updates. Both my gateways are V3, the old one and the new one.

updated: I bought another one to make another try: DO NOT UPDATE your new gateway! FIRST enable the lan control (maybe check if the 9898 port is open), then update the firmware. If you update the firmware before enabling lan control, it will no longer be possible

https://r.tapatalk.com/shareLink?url=ht ... are_type=t

We have to solder

Inviato dal mio Le X52x utilizzando Tapatalk

I found the problem. Newer Xiaomi Gateways have port 9898 closed: Starting Nmap 7.80 ( https://nmap.org ) at 2019-08-10 14:21 ora legale Europa occidentale Nmap scan report for 192.168.0.29 Host is up (0.024s latency). PORT STATE SERVICE 4321/udp closed rwhois 9898/udp closed monkeycom MAC Address ...

So, I did the same procedure as mentioned a few posts above. I keep getting the error: ERROR Xiaomi Gateway: recieved data from unregisterd gateway Verzonden vanaf mijn iPhone met Tapatalk same as me: 2019-08-10 12:54:38.580 Status: XiaomiGateway (ID=13): Delaying worker startup... 2019-08-10 12:54 ...

When I add the second gateway all I see in the log filtered with "gateway" word, is: 2019-08-08 18:14:11.947 Status: XiaomiGateway (ID=13): Delaying worker startup... 2019-08-08 18:14:16.947 Status: XiaomiGateway (ID=13): Selected as main Gateway and anything new shows up in the device list :roll ...

Thank you.
The problem is that I don't even see the second gateway itself between the devices. (I mean light,alarm,doorbell, etc)

sincze wrote: ↑Wednesday 12 June 2019 22:50 I followed the wiki and 2 gateways each with their own sensors work excellent.
Had to 'enable new hardware for 5 minutes' in the settings to get the devices in Domoticz.

At what point in the procedure should it be done exactly?

but I found thi command to be used in console:

TelePeriod <secs> Set telemetry period between 10 and 3600 seconds

and it works

I realized that "update timer" affects main idx only. The other sensors idx are updated every 5 minutes. So it's impossible to know instant consumption of the device. You only have a measurement that can be till 5 minutes old.

qwerk wrote: ↑Sunday 16 April 2017 20:28 It is not difficult, if you know how.:

I attached my script with even two sensors that need to be motionless for 20 minutes.

this is exactly what I was looking for, thank you very much