Search found 67 matches
- Sunday 04 February 2024 18:02
- Forum: General Discussion
- Topic: Domoticz from Raspi to Synology Docker or VMM ?
- Replies: 2
- Views: 637
Domoticz from Raspi to Synology Docker or VMM ?
Hello I have a Synology + model and my Unifi controller integrated in Docker. I would like to make my Domoticz which runs on a Pi 3b also in Docker. But since my house runs completely with Domoticz, I am a bit afraid of the implementation (especially because of my wife ;) Integrated is Yeelight ...
- Wednesday 28 September 2022 23:02
- Forum: Python
- Topic: Python Plugin: Shelly MQTT
- Replies: 504
- Views: 109743
Re: Python Plugin: Shelly MQTT
So now Buster installed but has brought nothing.
listener 1883
removed and then it worked
There are unfortunately many sites that write even with 2.0.11 it must be in.
listener 1883
removed and then it worked
There are unfortunately many sites that write even with 2.0.11 it must be in.
- Wednesday 28 September 2022 22:39
- Forum: Installation, Compiling, Permissions, Security and Starting
- Topic: SD Card defect, new installation after restore offline
- Replies: 6
- Views: 508
Re: SD Card defect, new installation after restore offline
So now Buster installed but has brought nothing.
listener 1883
removed and then it worked
There are unfortunately many sites that write even with 2.0.11 it must be in.
listener 1883
removed and then it worked
There are unfortunately many sites that write even with 2.0.11 it must be in.
- Wednesday 28 September 2022 21:52
- Forum: Python
- Topic: Python Plugin: Shelly MQTT
- Replies: 504
- Views: 109743
Re: Python Plugin: Shelly MQTT
viewtopic.php?p=292961#p292961
I have very big problems there.
Is it Bullseye or the new MQTT version ?
I have installed this 2 years ago once and everything ran on the first go.
Now I sit hours and hours and do not get it right
I have very big problems there.
Is it Bullseye or the new MQTT version ?
I have installed this 2 years ago once and everything ran on the first go.
Now I sit hours and hours and do not get it right
- Wednesday 28 September 2022 21:45
- Forum: Installation, Compiling, Permissions, Security and Starting
- Topic: SD Card defect, new installation after restore offline
- Replies: 6
- Views: 508
Re: SD Card defect, new installation after restore offline
This was all working so well and now I can't get it to work after hours. It is a fresh Respberry installation sudo apt install -y mosquitto mosquitto-clients sudo systemctl enable mosquitto.service Synchronizing state of mosquitto.service with SysV service script with /lib/systemd/systemd-sysv ...
- Wednesday 28 September 2022 18:03
- Forum: Installation, Compiling, Permissions, Security and Starting
- Topic: SD Card defect, new installation after restore offline
- Replies: 6
- Views: 508
Re: SD Card defect, new installation after restore offline
This has something to do with MQTT.
Have installed it but unfortunately it does not work
2022-09-28 18:02:08.076 Error: SellyMQTT: Disconnected from MQTT Server: 192.168.0.184:1883
2022-09-28 18:02:18.097 Error: SellyMQTT: Failed to connect to: 192.168.0.184:1883, Description: Connection refused
Have installed it but unfortunately it does not work
2022-09-28 18:02:08.076 Error: SellyMQTT: Disconnected from MQTT Server: 192.168.0.184:1883
2022-09-28 18:02:18.097 Error: SellyMQTT: Failed to connect to: 192.168.0.184:1883, Description: Connection refused
- Wednesday 28 September 2022 11:34
- Forum: Installation, Compiling, Permissions, Security and Starting
- Topic: SD Card defect, new installation after restore offline
- Replies: 6
- Views: 508
SD Card defect, new installation after restore offline
Hi
- New SD Card
- Current Raspberry installed
- All updates and upgrades
- Last stable Domoticz version installed
- Domoticz is started
- Domoticz finished via putty
- Plugins and scripts copied from backup
- Last db database imported
Now Domotizc starts only always offline
bye
Markus
- New SD Card
- Current Raspberry installed
- All updates and upgrades
- Last stable Domoticz version installed
- Domoticz is started
- Domoticz finished via putty
- Plugins and scripts copied from backup
- Last db database imported
Now Domotizc starts only always offline
bye
Markus
- Sunday 13 March 2022 21:28
- Forum: Switches and Scenes
- Topic: HTTP command from Domotiz from a scene ?
- Replies: 4
- Views: 1054
Re: HTTP command from Domotiz from a scene ?
After several attempts it worked. I suspect that once it was on Error, it stays on Error, even if the path was correct. With an Error one must wait probably something and then he takes the next attempt. Thanks a lot, now I can switch the HTTP link with Shelly Button 1. http://192.168.0.184:8085/json ...
- Sunday 13 March 2022 18:16
- Forum: Switches and Scenes
- Topic: HTTP command from Domotiz from a scene ?
- Replies: 4
- Views: 1054
Re: HTTP command from Domotiz from a scene ?
Hi http://192.168.0.184:8085/json.htm?username=YWRtaW4=&password=MTExMDE0&api-call { status: "ERR" } IP = 192.168.0.184 Port = 8085 User = admin Passwort = 111014 I have translated user and password with it https://www.base64encode.org/ With the user name and password I can log in without problems ...
- Wednesday 09 March 2022 21:49
- Forum: Switches and Scenes
- Topic: HTTP command from Domotiz from a scene ?
- Replies: 4
- Views: 1054
HTTP command from Domotiz from a scene ?
Can you see how the HTTP Commando from Domoticz when you switch a switch or scenze ? Can I get a link from Domoticz directly in the browser to switch a lamp or scene without being in Domoticz ? I have a shelly button and somehow I don't get along with it. Now I would enter a Domoticz circuit as HTTP ...
- Wednesday 09 March 2022 20:00
- Forum: Python
- Topic: Python Plugin: Shelly MQTT
- Replies: 504
- Views: 109743
Re: Python Plugin: Shelly MQTT
Hello I have been using Domoticz for many years basically with Yeelight lamps in LAN mode and Shelly products. Have various Shelly sockets, motion sensor, window detector and since short Shelly 1. Now I thought for my daughter a Shelly button to switch on zb your lamps or colored switch. I thought ...
- Saturday 08 May 2021 11:31
- Forum: Switches and Scenes
- Topic: Yeelight with 1% brighter than night light why ?
- Replies: 0
- Views: 198
Yeelight with 1% brighter than night light why ?
Hello I have paired the Yeelight with the Aqara motion sensors and written a blockly to it, that also works so far. If I go in Domoticz to 1% or night light the lamp is darker but still bright. If I go in the Yeelight app on night light, the lamp shines only very weak. Even with 1% under Domoticz, I ...
- Sunday 25 April 2021 19:06
- Forum: Blockly
- Topic: Motion detection with Yeeligh and Scene as night light ?
- Replies: 0
- Views: 317
Motion detection with Yeeligh and Scene as night light ?
Hi I would like to run a Yeelight lamp days with normal light and in the evening as a night light. I have Aqara motion sensors for this purpose. My Aqara Hub is integrated with Domoticz and running. I can integrate and configure the whole thing, but not as a Scene. I would have to create a night ...
- Sunday 25 April 2021 18:57
- Forum: Switches and Scenes
- Topic: Yeelight lamps for the ceiling without night light
- Replies: 0
- Views: 231
Yeelight lamps for the ceiling without night light
Hello
Yeelight YLXD76YL
I have new Yeelight ceiling lights in the hallway and bathroom.
These are set up in Domoticz as a lamp and and I can turn on and off.
I can also adjust the brightness.
However, I can't turn on the night light like I can with the Yeelight app.
Yeelight YLXD76YL
I have new Yeelight ceiling lights in the hallway and bathroom.
These are set up in Domoticz as a lamp and and I can turn on and off.
I can also adjust the brightness.
However, I can't turn on the night light like I can with the Yeelight app.
- Sunday 14 March 2021 20:01
- Forum: Heating/cooling
- Topic: Which multiroom thermostat to choose?
- Replies: 8
- Views: 1503
Re: Which multiroom thermostat to choose?
I have Popp termostats which unfortunately all break. Now I am thinking about buying Tado. Do I need a cloud subscription from Tado ? Do I have to have it ? https://www.amazon.de/-/en/V3P-4SRT01H-TC-ML-00-tado-Smart-Radiator-Thermostat/dp/B08D6VJVFG/ref=sr_1_5?crid=1OF72WF7P37M5&dchild=1&keywords ...
- Wednesday 17 February 2021 20:29
- Forum: Blockly
- Topic: Door Contact after a certain time to turn on a lamp ?
- Replies: 1
- Views: 501
Door Contact after a certain time to turn on a lamp ?
Hi Have a Door Contact I would like that at a time after 60 seconds a lamp turns on. When the freezer is open for 60 seconds, I want a lamp to turn on in the living room. Unfortunately I do not get that. Selly recognizes correctly open and closed. I can also connect a lamp to it, but not only after ...
- Wednesday 17 February 2021 20:10
- Forum: Python
- Topic: Python Plugin: Shelly MQTT
- Replies: 504
- Views: 109743
Re: Python Plugin: Shelly MQTT
I had the same idea.
But you can't make a Group or Scene with it.
But you can't make a Group or Scene with it.
- Wednesday 17 February 2021 19:47
- Forum: Python
- Topic: Python Plugin: Shelly MQTT
- Replies: 504
- Views: 109743
Re: Python Plugin: Shelly MQTT
Hi Have a Door Contact I would like that at a time after 60 seconds a lamp turns on. When the freezer is open for 60 seconds, I want a lamp to turn on in the living room. Unfortunately I do not get that. Selly recognizes correctly open and closed. I can also connect a lamp to it, but not only after ...
- Thursday 11 February 2021 21:19
- Forum: Python
- Topic: Python Plugin: Shelly MQTT
- Replies: 504
- Views: 109743
Re: Python Plugin: Shelly MQTT
OK all 4 Selly plug S are working.
First
https://www.youtube.com/watch?v=w7QhsFq ... R8dMA&t=0s
Then
https://www.youtube.com/watch?v=VvErOFB_fKI
First
https://www.youtube.com/watch?v=w7QhsFq ... R8dMA&t=0s
Then
https://www.youtube.com/watch?v=VvErOFB_fKI
- Thursday 11 February 2021 20:37
- Forum: Python
- Topic: Python Plugin: Shelly MQTT
- Replies: 504
- Views: 109743
Re: Python Plugin: Shelly MQTT
Hi pi@raspberrypi:~ $ python --version Python 2.7.16 Version: 2020.2 (build 12898) Build Hash: f784e2637-modified Compile Date: 2021-01-31 15:35:58 dzVents Version: 3.1.4 Python Version: 3.7.3 (default, I think I misunderstood. Is it necessary to install a MQTT server besides the SellyMQTT ? I ...