Thanks,
but i am not skilled enough to do that,

So a few days later: try to start mysgw but " sudo: ./bin/mysgw: command not found" is a unwanted response during make i get the following error (and some warnings) hal/architecture/Linux/drivers/core/interrupt.cpp:33:10: fatal error: stropts.h: No such file or directory 33 | #include <stropts.h ...

thanks walter,
i could not find that page.
have a good year

I have currently NRF24l10 currently working on my RPI as gateway for Mysensors. and currently busy to "rebuild" my Domoticz and upgrade it to a RPI4. i have considered migrating to HA but it is not that appealing as i hoped. so now i am stuck with adding the NRF24L10 to the RPI connector. i have 3 ...

Firewizard, i am using "mqtt explorer" to verify MQTT messages between devices and i can see other MQTT messages from other devices in "mqtt explorer". i could see in "mqtt explorer" messages send by the ESP but not send from Domoticz. your questions yes yes yes yes no all is working now due to the ...

hello all
found the problem.
you need to select setup in "hardware" MQTT client gateway with lan interface"
then select the needed devices and save.
i cannot remember doing this in previous versions.
but never to old to learn.

thanks

yes Wim. i am using MQTT helper. checked all settings multiple times and compared with working units. What i don't understand is if the settings are incorrect then why does it work from esp to domotica but not from domoticz to esp. it must be a Domoticz setting because i don't see the message in ...

most of the esp8266 are working with mqtt.
the strange thing is that it only works one way

hello all, I need some help with MQTT. I have added a new ESP32 (espeasy ) with 4 inputs and 7 outputs to control light based on PIR's. The inputs from the ESP are received in Domoticz but switching a lamp does not work, I have tried to find it with MQTT Explorer but see only the working messages ...

EgiGeoZone Geofencing is still available.
it would be nice to have some more guidelines how to use this in Domoticz

thanks

i just found this topic
Re: Ability to group some devices with a dedicated view.
So will dive into templates.

regards

hello, i have tried to find this suggestion in this topic but haven't found it. I have too many switches in the switch tab and temperature devices in the tep tab. it is possible to copy a few to the dashboard tab but then this tab would turn into a unreadable tab. with to many entries. So it would ...

hello all last trial, i have been able ( i think) to get the previous version running but get two errors. both involve GLIBC_2.30 and 29. two questions. how do i verify the current version. ( i don't have web access probably caused by GLIBC) and how do i solve GLIBC. Or do i need to go one version ...

tenx Kedi, sudo chmod 0777 did the trick. but after reinstalling and uploaded the db ( which i saved just before the i updated to the not working version due to ARMv6 ) a fresh / EMPTY domoticz appears. i have used the domoticz_backup_20220212_213627.tar.gz file in the backups directory but i am ...

Clear, but that's what i already tried. I don't know how to get permission "backup location not accessible" see previous entry Trying to roll back has not (hopefully YET) succeeded although expected no problems after reading "Revert to backup after incorrect update " on https://www.domoticz.com/wiki ...

Sorry my mistake not explaining too well. i can reach it via Putty (see below) pi@raspberrypi:~ $ sudo service domoticz.sh start pi@raspberrypi:~ $ sudo service domoticz.sh status ● domoticz.service - LSB: Home Automation System Loaded: loaded (/etc/init.d/domoticz.sh; generated) Active: active ( ...

hello all. unfortunately life is not always what you expect. the message "update available" was bothering me and thought it might be smart to run an update Domoticz was shouting for. So made a backup and hit the update button ! after reaching 100 % i got the message that the "ARMv6 is not supported ...

you saved my day,
looks that it is solved
but how did this happen ?

thanks

:oops: :oops: :oops: hello all, MAJOR disaster happened a few minutes ago. :evil: I lost about 160 x Devices of various types. i have only a few IDX (switch etc) of the 160 IDX "numbers" All IDX are on the "setup, devices"page together with the unused ones. totally 840 Also all events Mainly blockly ...

hello all, one way or another but Domoticz main crashes after prox 10 hours since i have been struggling with master/slave RPI. I cannot find the reason so installed Monit for help. But the webpage shows domoticz not connected. I have checked the setting in security trusted network and 127.0.0.1 is ...