Hesmink wrote: ↑Friday 19 January 2024 20:48

Hesmink wrote: ↑Friday 19 January 2024 20:42 Is there any way to force the checker to request only for ipv4?

I now get an ipv6 address from https://ifconfig.me/ip

To answer my own question: https://ipv4.icanhazip.com

Thanks that helped I was trying the "-4 ifconfig.me" way but that did not work out

I noticed the MQTT commands changed slightly. From: { "state": "ON", "brightness": 255, "color": { "r": 255, "g": 255, "b": 255 }, "color_mode": "brightness", "status": "ON" } To: {"state":"ON","color":{"r":255,"g":136,"b":100}} {"state":"ON","brightness":148} Or for white: {"state":"ON","color":{"r ...

Tnx for sharing I can work with that

Just a heads up before updating! I just updated my ESP8266 milight hub to version 1.13.0 New interface looks really fantastic. The lights via this hub are integrated via autodiscovery into Domoticz 2024.7. When enabling the alarm the milights would flash red and disabling they would flash green. I ...

I created a customstart.sh. So everytime my Domoticz container is re-created the wallbox is re-installed. https://www.domoticz.com/wiki/Docker#custom_startup_script_for_the_container The plugin itself is maintained as this is mounted into the docker. #!/bin/bash if [ -f /opt/domoticz/FIRSTRUN ...

It seems docker does not know wallbox.
Probably the docker was renewed??

How did you install the plugin in the docker?

A small update from my quest to switch from Openzwave to zwaveJS. With the begining of this year I made a fresh install of the 64bit version of Buster on my RPI4. Installed domoticz 2023 and zwaveJS with docker with help of this post [ https://www.domoticz.com/forum/viewtopic.php?p=303505&hilit ...

Hello, Interesting topic. I've looked at the two versions of the plugin mentioned in this topic: https://github.com/lokonli/domoticz-wallbox https://github.com/sincze/domoticz-wallbox Which one should I use? I've just tried installing them both (to folders wallbox and wallbox1 ) and I can't see ...

Is it possible to change the hardware on the plugin devices to the hardware (ID) of the Dummy? Yes. oldID=12 # change to ID of "old hardware" newID=15 # change to ID of "new hardware" cd <domoticz dir> sudo service domoticz stop sudo cp domoticz.db domoticz.keep sqlite3 domoticz.db "UPDATE ...

waltervl wrote: ↑Friday 12 April 2024 9:29 Or use the mqttmapper plugin. I think this would be the easiest way.

Again, your knowledge (walking wiki) always seems to amaze me. Thanks for the tip!!

Found this trick. https://github.com/jagheterfredrik/wallbox-pwn together with: https://github.com/jagheterfredrik/wallbox-mqtt-bridge It allows you to obtain full control and all data locally from the Wallbox without breaking the Cloud functionality. It publishes data to MQTT every second. Wallbox ...

Egregius wrote: ↑Friday 12 April 2024 4:54 I already guessed it would be the recorder. I disabled default config to disable history and recorder completely. Still 3GB written each day

Written a day yes. But mine cleans it back daily at 02:22:22 would that be of interest?? It is an automation task.

creates a 30GB DB in 10 days... (because I forwarded some devices to domoticz to it...) it is crazy. Did you find anything to limit the db size? I'm searching for avoiding disk writes but can't get it lower than 3GB/day for hass. My domoticz server only writes 200MB/day. I went down from total DB ...

creates a 30GB DB in 10 days... (because I forwarded some devices to domoticz to it...) it is crazy. Did you find anything to limit the db size? I'm searching for avoiding disk writes but can't get it lower than 3GB/day for hass. My domoticz server only writes 200MB/day. I went down from total DB ...

Indeed it has nothing to do with php In this script I use an alternative methode: https://www.domoticz.com/forum/viewtopic.php?p=306625&hilit=ultimate#p306625 If you install sqlite3 then this command is much faster and can run outside of Domoticz when ever you want. sqlite3 $SOURCEPATH$SOURCEFILE ...

waltervl wrote: ↑Sunday 31 March 2024 12:26 2024.4 gives me normal size backup when doing it through menu Settings > Backup and Restore -> Backup.
So it seems something is wrong in your setup.

Hehe probably. But with debug logging on and no errors... hard to find out.

What does the PHP command do?

Mmm interesting. sudo /usr/bin/curl -v -s http://domo_ip:domo_port/backupdatabase.php > file2.db Domoticz Version: 2023.1 it does give me the DB as a backup Domoticz Version: 2024.4 gives me 0 bytes Response Code is HTTP/1.1 200 OK So that does not seem to be unauthorized. [31/Mar/2024:11:12:43.561 ...

The hourly backup can be disabled by removing the hourly folder in domoticz/backups. Then you only get the daily and monthly backup. Also check the log history settings especially the Lights/switches log setting as those can become very big if it has a long retention period eg 30 days. You really ...

this is how i do it... #!/bin/bash curl http://$DOMO_IP:$DOMO_PORT/backupdatabase.php >$BACKUP_PATH/$BACKUP_NAME I indeed sometimes heard the famous words "LIGHTS NOT TURNING ON!", only just to realize this had something to do with the hourly backup of a 90 MB file. I noticed it myself only 2 days ...

ravikjab wrote: ↑Thursday 29 February 2024 21:49 What if i have 4 pcs power station in account growatt? How configurate this script?

That is a good question. I have no such amount of devices so unable to debug this.