I recently bought a "Hoppe eFenstergriff ConnectHome" which works in Domoticz. Only when i define it as a door lock , then "open" and "closed" is visualized correctly. When i define it as a simple contact or door contact, the open and closed status ist visualized inversly. I don't know, whether the ...

Meanwhile i got the transmitter for the anemometer, set it to ID 2 and checked its functionality. It works with the Davis console. Also the meteostick reports the signal (see minicom output) minicom ausgabe.png But Domoticz recognizes only an UV and a rain sensor on ID 2 (which are not connected ...

I plugged the meteostick into an USB port of my Windows PC and checked the device manager if it is recognized as a serial port. (In my case it was COM 5) I downloaded a serial terminal for my PC like HTerm http://www.der-hammer.info/terminal/ unzipped and started it. COM 5 was automatically detected ...

I just bought a Davis Vantage Pro and i'm afraid to run into the same problem as i plan to separate the anemometer from the ISS with an additional transmission unit. Normally the meteostick listens only to transmitter nr. 1 I have read in the meteostick manual https://www.smartbedded.com/files ...

Does anyone have experience with this thermostat in domoticz? http://www.zwave-shopping.com/en/climate-control/mco-home/4543-mco-home-water-heating-thermostat-mh7-mcoemh7-wh.html It is offered as Z-Wave product, but i find it neither in the open Z-Wave library, nor in the Z-Wave alliance database ...

It works, when i add another node to the groups of the Fibaro swipe: e.g. node 12.1 to group 1 of the swipe. node 12.1 is switch nr. 1 of a Fibaro FGS223 double relay and group 1 is the swipe up gesture. Each time, when i swipe up, the light at switch nr 1 of the FGS223 is switched on or off. This ...

I was able to include the Fibaro Swipe into domoticz. After the inclusion, it was recognized only as a wall controller. It took several wake ups on the Swipe (e.g. waiting several hours or pressing the B-button inside the Swipe) until the whole device was recognized. So you have to be patient. The ...