Hi,
Does anybody know if the Xiaomi Aqara flood sensors are working with one of the latest Domoticz beta build ?

I cannot find anything on github ( https://github.com/domoticz/domoticz/commits/development?before=b4b59b0762a1715d4ecf574ebae060f6a77b9fae+35&path%5B%5D=hardware&path%5B%5D ...

Could you please add Gas Sensor to Domoticz, logs:


Thanks, have added to https://github.com/corbinmunce/domoticz

Setting it as a smoke detector, type same as the actual smoke detector. Anyone know if there is a more suitable device type for Gas?
Thanks a lot!

UPD: additional information ...

Was the error when smoke was detected?

You can enable the raw gateway messages to appear in the Domoticz log by creating a user variable 'XiaomiMessage' of type Integer and value 1. (Setup -> More Options -> User Variables). Then restart the Gateway hardware in Domoticz. from http://www.domoticz ...

Nice, what is the format of the XiaomiMP3 variable, the default 10001 I mean. Does it contain both the volume and sound number?
I saw something in the source that the value is shifted by 10000, is the remaining value the sound number? (1 in this case) or am I in the wrong direction.
)

this will ...

And now I tested few more times, and it seems to work... Strange...
Distance between the flora and pi is 4m without obstacles (i tried from 20cm distance, but received also sometimes confused responses)
(bluetooth on phone is turned off, app connects fine each time and gets historical data fine ...

Sorry, when i type : sudo curl -L https://github.com/corbinmunce/domoticz.git | sudo bash
Follows this :

% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 178 100 178 0 0 257 0 --:--:-- --:--:-- --:--:-- 257
bash: Zeile 7: Syntaxfehler beim ...

Problem...
My Domotics V3.5877 runs at a Raspberry. When in i click Update to new Beta, Domoticz is after installing update offline (Failure) :-(
How can i install Corbins Version https://github.com/corbinmunce/domoticz at Raspberry manual?
Greetings Hans
backup your database and move Domoticz ...

Yup miflora is still on same place and sensor now works....
connect: Device or resource busy (16)
Mi Flora: C4:7C:8D:61:B4:DA
Firmware: 2.6.2
connect: Device or resource busy (16)

edit: noticed that its not 100% ok sometimes its not working (weird is thas when i run hcitool lescan before ...

deennoo wrote:

Coldman wrote:With theme "Dark th3me" does not fit
2017-04-04_17-53-43.png

That why that à beta.

I thing rolling liste is better. Those option have to be use on event or scène not on point and Click, who is agree?

It's just a "note", I agree

With theme "Dark th3me" does not fit

Mr. Corbin,
Great job!
2017-04-04 17:47:53.697 (xGW) Light/Switch (Xiaomi Smart Wall Plug)
2017-04-04 17:47:53.702 {"cmd":"report","model":"86plug","sid":"158d0001575156","short_id":26606,"data":"{\"status\":\"off\"}"}
2017-04-04 17:47:57.074 (xGW) Light/Switch (Xiaomi Smart Wall Plug)
2017-04-04 ...

corbin wrote:alarm.PNG

https://github.com/corbinmunce/domoticz is updated which should address some of the device problems

Great job, thanks a lot!

found that BE Mi Flora works only when i restart machine on first try....., on second try i have
connect: No route to host (113)
so its some BE problem machine :(

EDIT: ok it was problem with old Bluetooth daemon, upgraded to 5.44 version and it works now

works wit longer distance too ?

Yup ...

i have problems with Mi Flora, sensor works only when is really near with script (1-2m) and event then reading is often with timeout,
but when is about 5 meters and one window
connect: No route to host (113)
but with hcitool lescan is visible
LE Scan ...
C4:7C:8D:61:B4:DA (unknown)
C4:7C:8D:61 ...

I'm using the Chrome extension "Cache Killer" that you recommended, I also tried Firefox

I still think it is a caching issue. In Chrome, run developer tools and tick 'disable cache' under the network tab, then refresh the page - make sure you get the "Browser Cache is being refreshed..." message ...

corbin wrote:

Coldman wrote:Hi Corbin,
In last beta 3.7115 could not to add Gateway, no way to enter IP, port and password

99.9% chance your browser has cached old files, you need to force the cache to clear.

I'm using the Chrome extension "Cache Killer" that you recommended, I also tried Firefox

Hi Corbin,
In last beta 3.7115 could not to add Gateway, no way to enter IP, port and password
I was too lazy to compile from the sources and I used a short command
sudo curl -L install.domoticz.com | sudo bash
2017-03-23_23-38-47.png
any ideas?
thanks

upd: but using my.domoticz.com I was able ...

I have problems with Xiaomi Smart Socket (ZigBee). Domoticz v3.6908


Can you describe the problem further? Looking at these two logs, the times do not coincide?
Hi Corbin, I have same issue, in the log few messages when sockets on / off
2017-03-12 20:25:11.624 User: Admin initiated a switch ...

LouiS22 wrote:

Code: Select all

connect error: Transport endpoint is not connected (107)

This error message is so annoying and still haven't found a way to defeat it. Any suggestions?

How far are the sensors from the controller? I stopped getting errors on the last firmware

Hi all - does anyone have xiaomi zigbee socket? Can you show sample LUA script, switching on and off it for example? Thank you in advance.

commandArray = {}

if devicechanged[MultiSensor Motion] == "Off" then
commandArray[xSP02] = "Off" -- Xiaomi ZigBee plug
elseif devicechanged[MultiSensor ...